6 layers30 × 60 mm
LSR FLCM0001 A03
Louisiana-State-Rocketry/FLCM0001-A03_PCB
PCB Files for the Eclipse 2 Flight Computer.
150 partsMIT
4 layers65 × 64.6 mm
DroneFlightcontroller
SPKAYTAR/DRONE_PORTFOLIO- Size
- 65 × 64.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 88
- Pads
- 365
- Tracks, vias
- 1,002, 185
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Sep 2026
- Updated
- 2 Sep 2026
Overview
DroneFlightcontroller is an open-source printed circuit board by SPKAYTAR, from the SPKAYTAR/DRONE_PORTFOLIO repository on GitHub. It is a 4-layer board of 65 × 64.6 mm with 100 parts on 88 nets, routed with 1,002 tracks and 185 vias.
It is built around the BMP390, LIS2MDL and MCP1825S-3302E/DB, with the TPS2121RUXR, TPS54302 and USBLC6-2SC6 among its other parts. Its parts include 42 capacitors, 26 resistors, 17 connectors, 8 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
6
BMP390
LGA-10(2x2)-40℃~+85℃ 0.6pa/K 1.5uA 1.65V~3.6V 30Kpa~1.25bar 3pa 50pa I2C、SPI Integrated ADC and digital interface、Standby mode、On-chip temperature output Yes LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure Sensors
LIS2MDL
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 16bit 200uA I2C、SPI ±5mT ±5mT LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic Sensors
MCP1825S-3302E/DB
SOT-223-3-40℃~+125℃@(Tj) 1 120uA 210mV@(500mA) 3.3V 500mA 60dB@(100Hz) 6V Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Short Circuit Protection SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS2121RUXR
VQFN-HR-12(2x2.5)-40℃~+125℃ 2.8V~22V 200uA 56mΩ VQFN-HR-12(2x2.5) ORing Controllers ROHSTexas InstrumentsBattery Management
TPS54302
UncategorisedTexas InstrumentsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdParts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | .1u | Capacitor_SMD:C_0603_1608Metric | C7, C9, C10, C12, C13, C14, C15, C16, C17, C20, C21, C28, C29, C41, C42 |
| 12 | 10u | Capacitor_SMD:C_0603_1608Metric | C8, C11, C24, C30, C31, C32, C33, C34, C35, C36, C37, C40 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric | R12, R13, R15, R18, R19, R20, R21, R22, R23 |
| 7 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4, J5, J6, J7, J8, J9 |
| 4 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12, J13, J14, J16 |
| 3 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C18, C38, C39 |
| 3 | 5k | Resistor_SMD:R_0603_1608Metric | R11, R24, R25 |
| 2 | .000022 | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C22, C23 |
| 2 | 100u | Capacitor_SMD:C_1210_3225Metric | C26, C27 |
| 2 | 23.7k | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | 5100 | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J11, J17 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 1 | .0000001 | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | .0000001 | Capacitor_SMD:C_1210_3225Metric | C2 |
| 1 | .00001 | 1_BuzzerF:BMMA00060630100MX2 Inductor | L1 |
| 1 | .00001 | Capacitor_SMD:C_1210_3225Metric | C1 |
| 1 | 10.2k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 105k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 13.3k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 35.7k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 49.9 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 511k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 75p | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | BMP390 | 1_BuzzerF:BMP390 Barometer Bosch | U6 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J15 |
| 1 | D_TVS | 1_BuzzerF:P37_SOD-123FL | D1 |
| 1 | ICM-42688-P_gyro | 1_BuzzerF:PQFN50P300X250X97-14N gyro | U5 |
| 1 | LIS2MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U7 |
| 1 | MCP1825S-3302E/DB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Resonator | 1_BuzzerF:CSTNE8M00GH5L000R0_MUR | Y2 |
| 1 | STM32F415RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW2 |
| 1 | TPS2121RUXR | 1_BuzzerF:IC_TPS2121RUXR | U4 |
| 1 | TPS54302 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U9 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | VIN | Connector_Wire:SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm | J1 |
Similar boards
- 2 layers91.5 × 100 mm
Trailmap
katetriestocode/trailmap
this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)
57 parts2 - 4 layers71.7 × 62.4 mm
- 6 layers39.5 × 39.5 mm
P4eregrine
anticitizn/p4eregrine
All-in-one ESP32 P4-based drone ESC, flight controller, and video processor
359 parts21 - 4 layers60 × 150 mm
HAL-1-HW
liquid-rocketry-illinois/HAL-1-HW
Hardware designs for HAL-1, including EDA files, datasheets, AV Bay CAD files, and other relevant files for final design.
114 parts - 4 layers41.6 × 42 mm
IEE Drone 2026
CalebJM04/IEEE-2026-UAV
Drone project for IEEE 2026 UAV. Primarily created by Caleb Murray
54 parts - 4 layers55 × 140 mm
- 2 layers53.2 × 35.3 mm
Questions
How big is the DroneFlightcontroller PCB?
It measures 65 × 64.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DroneFlightcontroller use?
100 parts, built around the BMP390, LIS2MDL, MCP1825S-3302E/DB and TPS2121RUXR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DroneFlightcontroller KiCad files?
From the SPKAYTAR/DRONE_PORTFOLIO repository on GitHub, at the commit this page was made from: the board is DroneFlightcontroller/DroneFlightcontroller.kicad_pcb and its schematic DroneFlightcontroller/DroneFlightcontroller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DroneFlightcontroller design in my own project?
Its repository states no licence, so its author keeps all rights: ask SPKAYTAR before reusing the design.