

2025SIMPLETVC
- Size
- 55 × 140 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 50
- Pads
- 164
- Tracks, vias
- 199, 86
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Apr 2025
- Updated
- 22 Apr 2025
Overview
2025SIMPLETVC is an open-source printed circuit board by Kev1n8088, from the Kev1n8088/2025SIMPLETVC repository on GitHub. It is a 4-layer board of 55 × 140 mm with 41 parts on 50 nets, routed with 199 tracks and 86 vias.
It is built around the BMP390, LIS2MDL and AMS1117-5.0, with the BNO085, TXS0102DCT and BSS138 among its other parts. Its parts include 15 resistors, 8 connectors, 7 ICs, 4 capacitors and 2 transistors.
Main components
6BMP390
LGA-10(2x2)-40℃~+85℃ 0.6pa/K 1.5uA 1.65V~3.6V 30Kpa~1.25bar 3pa 50pa I2C、SPI Integrated ADC and digital interface、Standby mode、On-chip temperature output Yes LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure SensorsLIS2MDL
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 16bit 200uA I2C、SPI ±5mT ±5mT LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic SensorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBNO085
LGA-28(3.8x5.2)1.65V~3.6V 12bit、16bit IMU (accelerometer + gyroscope) SPI、I2C、UART X,Y,Z X,Y,Z ±2000dps ±8g LGA-28(3.8x5.2) Accelerometers ROHSCEVAAccelerometersTXS0102DCT
SSOP82-Bit Bidirectionnal Voltage-Level Translator for Open-Drain and Push-Pull ApplicationsTexas InstrumentsUncategorisedBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7, R17 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 180k | Resistor_SMD:R_0402_1005Metric | R10, R16, R21 |
| 3 | 56k | Resistor_SMD:R_0402_1005Metric | R15, R18, R22 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C19 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R20 |
| 2 | 3.3k | Resistor_SMD:R_0402_1005Metric | R9, R19 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | A1 |
| 1 | BATT | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J10 |
| 1 | BMP390 | AdafruitBreakouts:BMP390_Breakout_Footprint | U4 |
| 1 | BNO085 | AdafruitBreakouts:BNO085_Breakout_Footprint | U2 |
| 1 | ELEC ARM | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J4 |
| 1 | LIS2MDL | AdafruitBreakouts:LIS2MDL_Breakout_Footprint | U7 |
| 1 | PYRO 1 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J6 |
| 1 | PYRO 2 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J8 |
| 1 | PYRO ARM | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J5 |
| 1 | SD | AdafruitBreakouts:SD_Breakout_Footprint | U3 |
| 1 | SRV 1 | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J2 |
| 1 | SRV 2 | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J3 |
| 1 | TXS0102DCT | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U1 |
| 1 | UART1 5V | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J7 |
| 1 | ~ | FCU2025Lib:SQJ500AEP-T1_GE3_VIS | U5 |
Similar boards
- 2 layers52.3 × 71.5 mm

- 2 layers91.5 × 100 mm

Trailmap
katetriestocode/trailmap
this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)
57 parts2 - 4 layers41.6 × 42 mm

IEE Drone 2026
CalebJM04/IEEE-2026-UAV
Drone project for IEEE 2026 UAV. Primarily created by Caleb Murray
54 parts - 6 layers30 × 60 mm

LSR FLCM0001 A03
Louisiana-State-Rocketry/FLCM0001-A03_PCB
PCB Files for the Eclipse 2 Flight Computer.
150 partsMIT - 4 layers65 × 64.6 mm

- 4 layers65 × 30 mm

- 2 layers0.7 × 0.5 mm

- 4 layers50 × 80 mm

SensBoard
Hazel-H-Chen/PocketSens
Microcontroller based sensor suite for portable environmental measurements.
62 parts1MIT
Questions
How big is the 2025SIMPLETVC PCB?
It measures 55 × 140 mm and has 4 copper layers, 1.6 mm thick.
What parts does the 2025SIMPLETVC use?
41 parts, built around the BMP390, LIS2MDL, AMS1117-5.0 and BNO085. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2025SIMPLETVC KiCad files?
From the Kev1n8088/2025SIMPLETVC repository on GitHub, at the commit this page was made from: the board is 2025SIMPLETVC.kicad_pcb and its schematic 2025SIMPLETVC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2025SIMPLETVC design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kev1n8088 before reusing the design.