

FCUTVC2025Feather
- Size
- 52.3 × 71.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 60
- Pads
- 225
- Tracks, vias
- 355, 118
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Jan 2025
- Updated
- 23 Jan 2025
Overview
FCUTVC2025Feather is an open-source printed circuit board by Kev1n8088, from the Kev1n8088/FCUTVC2025Feather repository on GitHub. It is a 2-layer board of 52.3 × 71.5 mm with 59 parts on 60 nets, routed with 355 tracks and 118 vias.
It is built around the LIS2MDL, MS5611-01BA03 and AMS1117-5.0, with the ICM-42688-P, TXS0102DCT and BSS138 among its other parts. Its parts include 19 resistors, 13 capacitors, 12 connectors, 6 ICs and 2 transistors.
Main components
6LIS2MDL
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 16bit 200uA I2C、SPI ±5mT ±5mT LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic SensorsMS5611-01BA03
QFN-8(3x5)QFN-8(3x5) Pressure Sensors ROHSMEASPressure SensorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsICM-42688-P
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 7.5uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps Motion Event Detection, Synchronization, Timestamp Support LGA-14(2.5x3) Accelerometers ROHSTDK InvenSenseAccelerometersTXS0102DCT
SSOP82-Bit Bidirectionnal Voltage-Level Translator for Open-Drain and Push-Pull ApplicationsTexas InstrumentsUncategorisedBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad_TopBottom | H1, H2, H3, H4, H5, H6 |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C23, C25, C26, C28, C30 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7, R17 |
| 4 | 47k | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C2, C19, C31 |
| 3 | 180k | Resistor_SMD:R_0402_1005Metric | R10, R16, R21 |
| 3 | 56k | Resistor_SMD:R_0402_1005Metric | R15, R18, R22 |
| 3 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J4, J6, J8 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R20 |
| 2 | 3.3k | Resistor_SMD:R_0402_1005Metric | R9, R19 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J2, J3 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10, J11 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J12, J13 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C1 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C27 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 220nF | Capacitor_SMD:C_0402_1005Metric | C24 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | A1 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J5 |
| 1 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J7 |
| 1 | ICM-42688-P | FCU2025Lib:PQFN50P300X250X97-14N | U4 |
| 1 | LIS2MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U3 |
| 1 | MS5611-01BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U2 |
| 1 | Micro_SD_Card_Det2 | Connector_Card:microSD_HC_Hirose_DM3BT-DSF-PEJS | J1 |
| 1 | TXS0102DCT | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U1 |
| 1 | ~ | FCU2025Lib:SQJ500AEP-T1_GE3_VIS | U5 |
Similar boards
- 4 layers55 × 140 mm

- 4 layers50 × 100 mm

Flight computer one
liquid-rocketry-illinois/flight-computer-one-hw
SAME51-based flight computer with active control capabilities
105 partsCERN-OHL-S-2.0 - 4 layers66 × 47 mm

- 2 layers45 × 85 mm

- 4 layers35.1 × 77 mm

- 4 layers50 × 100 mm

- 4 layers65 × 30 mm

- 2 layers63.5 × 24 mm

Cansatrecruit
hyonis-png/satellitepcb
A custom PCB designed in KiCad to integrate an IMU (Inertial Measurement Unit) and a magnetometer for a university satellite design project.
16 parts
Questions
How big is the FCUTVC2025Feather PCB?
It measures 52.3 × 71.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FCUTVC2025Feather use?
59 parts, built around the LIS2MDL, MS5611-01BA03, AMS1117-5.0 and ICM-42688-P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FCUTVC2025Feather KiCad files?
From the Kev1n8088/FCUTVC2025Feather repository on GitHub, at the commit this page was made from: the board is FCUTVC2025Feather.kicad_pcb and its schematic FCUTVC2025Feather.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FCUTVC2025Feather design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kev1n8088 before reusing the design.