4 layers280 × 200 mm
Main Control Unit
Tuskar-Marine/hardware
All tools for the Mermaid's Rest open sailing tools
409 parts6
4 layers41.5 × 41.5 mm
Battery simulator PCB
SK-Electronics-Consulting/battery-simulator5Portable and Compact Battery Simulator for Electronics Development and Debugging (Work in Progress)
- Size
- 41.5 × 41.5 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 43
- Nets
- 26
- Pads
- 131
- Tracks, vias
- 152, 48
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Dec 2022
- Updated
- 12 May 2023
Overview
Battery simulator PCB is an open-source printed circuit board by SK-Electronics-Consulting, from the SK-Electronics-Consulting/battery-simulator repository on GitHub. It is a 4-layer board of 41.5 × 41.5 mm with 43 parts on 26 nets, routed with 152 tracks and 48 vias.
It is built around the FUSB302BMPX and BD33C0AFP-CE2. Its parts include 8 resistors, 6 capacitors, 3 ICs, 3 diodes and 2 connectors. It belongs with the power boards of this library.
Main components
2
FUSB302BMPX
WFQFN-14(2.5x2.5)-40℃~+125℃ 2.8V~5.5V 25uA Controller USB 3.1 WFQFN-14(2.5x2.5) USB Converters ROHSonsemiUSB Converters
BD33C0AFP-CE2
TO-252-40℃~+125℃@(Ta) 1 1A 2.5mA 26.5V 3.3V 500mV@(500mA) 55dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSROHM SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
PCB/README.mdbattery simulator PCB
[Replace these texts and sections as needed. This file should desribe the PCB, and associated information.]
Background
[Fill this out with general info]
[Next Section]
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | TestPoint | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP1, TP2, TP3, TP4, TP5, TP10, TP11, TP12, TP15 |
| 6 | TestPoint | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | TP6, TP7, TP8, TP9, TP13, TP14 |
| 3 | 0.1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C4, C6 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R7 |
| 2 | 2.2u | Capacitor_SMD:C_0805_2012Metric | C3, C5 |
| 2 | 5.76k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 2 | D_Schottky | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1, D2 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | 47u | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C1 |
| 1 | 5k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | BD33C0AFP-CE2 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | FUSB302BMPX | Package_DFN_QFN:WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U3 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | OPA569DWP | Package_SO:SO-20-1EP_7.52x12.825mm_P1.27mm_EP6.045x12.09mm_Mask3.56x4.47mm | U1 |
| 1 | QWIIC | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J2 |
The 40 most common of 43 parts.
Similar boards
- 4 layers40.6 × 17.8 mm
- 2 layers43.2 × 17.6 mm
- 2 layers34.5 × 28 mm
USB PD Breakout
ReclaimerLabs/USB-PD-Breakout
A breakout board for the FUSB302 USB Power Delivery PHY
25 parts110MIT - 8 layers45 × 70 mm
- 2 layers37.8 × 52.3 mm
- 4 layers83.1 × 92.5 mm
- 6 layers76 × 46.4 mm
Rp2350 driver
sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller
291 parts39
Questions
How big is the Battery simulator PCB PCB?
It measures 41.5 × 41.5 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Battery simulator PCB use?
43 parts, built around the FUSB302BMPX and BD33C0AFP-CE2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Battery simulator PCB KiCad files?
From the SK-Electronics-Consulting/battery-simulator repository on GitHub, at the commit this page was made from: the board is PCB/battery simulator PCB.kicad_pcb and its schematic PCB/Power Input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Battery simulator PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask SK-Electronics-Consulting before reusing the design.