4 layers40.6 × 17.8 mm
2 layers34.5 × 28 mm
USB PD Breakout
ReclaimerLabs/USB-PD-Breakout110A breakout board for the FUSB302 USB Power Delivery PHY
- Size
- 34.5 × 28 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 26
- Pads
- 113
- Tracks, vias
- 273, 41
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Apr 2016
- Updated
- 22 Jul 2019
Overview
USB PD Breakout is an open-source printed circuit board by ReclaimerLabs, from the ReclaimerLabs/USB-PD-Breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 34.5 × 28 mm with 25 parts on 26 nets, routed with 273 tracks and 41 vias.
It is built around the FUSB302BMPX. Its parts include 6 capacitors, 4 connectors, 3 resistors, 2 crystals and 1 IC. It belongs with the power and interfaces and adapters boards of this library.
Main components
1README
README.mdIntroduction
This board features an FUSB302B as a Type-C Port Management (TCPM) chip. You can purchase one on Tindie.
Features
The FUSB302B is a fully-capable USB Power Delivery device. The power header is rated to 100 W (20 V at 5 A) if both Vbus pins are used along with two ground pins. The FUSB302B's max I2C clock frequency is 1 MHz.
Example Usage
Example code for use with Arduino can be found here. The USB-C Explorer also uses the same chip.
Here are the connections you will need.
- Breakout Pin -> Arduino Pin
- GND -> GND
- Vbus -> Vin (power to the Arduino, regulated down to +5V)
- Vpu -> IOREF (power for pullups for I2C and interrupt)
- VDD -> 3.3V (power for the FUSB302B)
- SDA -> SDA
- SCL -> SCL
- INT -> D12
- GND -> GND (for good measure)
Questions, Comments, and Contributions
Pull requests are welcome. If you have questions or comments, you can email me directly at jason@reclaimerlabs.com.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | TEST_1P | Jason_Custom_Home:TP | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 |
| 3 | 4.7k | Capacitors_SMD:C_0603 | R1, R2, R3 |
| 2 | 0.1uF | Capacitors_SMD:C_0603 | C2, C4 |
| 2 | 470pF | Capacitors_SMD:C_0603 | C5, C6 |
| 2 | MTHOLE | Reclaimer_Labs:MountingHole_3.5mm_Pad_Via | X1, X2 |
| 1 | 10uF | Capacitors_SMD:C_1206 | C1 |
| 1 | 1uF | Capacitors_SMD:C_0805 | C3 |
| 1 | CONN_02X03 | Socket_Strips:Socket_Strip_Straight_2x03 | J3 |
| 1 | Conn_01x08_Male | Socket_Strips:Socket_Strip_Straight_1x08_Pitch2.54mm | J4 |
| 1 | FUSB302BMPX | Reclaimer_Labs:MLP_14 | U1 |
| 1 | USB-C_Female | Reclaimer_Labs:USB-C_Female_105450-0101 | J1 |
| 1 | USB_OTG | Reclaimer_Labs:USB_Micro-B_10118193 | J2 |
Similar boards
- 2 layers43.2 × 17.6 mm
- 8 layers45 × 70 mm
- 2 layers37.8 × 52.3 mm
- 4 layers83.1 × 92.5 mm
- 6 layers76 × 46.4 mm
Rp2350 driver
sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller
291 parts39 - 4 layers26 × 98 mm
- 2 layers89.8 × 10.2 mm
Questions
How big is the USB PD Breakout PCB?
It measures 34.5 × 28 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USB PD Breakout use?
25 parts, built around the FUSB302BMPX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB PD Breakout KiCad files?
From the ReclaimerLabs/USB-PD-Breakout repository on GitHub, at the commit this page was made from: the board is electrical/USB-PD-Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB PD Breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).