
Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers

Some weird Smarthome project.
Esp8266 doorlock is an open-source printed circuit board by S4ndf1re, from the S4ndf1re/SmartHome repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 60 × 40 mm with 15 parts on 29 nets, routed with 147 tracks and 25 vias.
It is built around the ESP-12E and AMS1117-3.3. Its parts include 5 resistors and 2 capacitors. It belongs with the home automation and IoT boards and the ESP8266 boards of this library.
During Covid-19 lockdown, I started a hobby project to experiment with plugin support for MQTT Services. This repository is the result.
Primarily, this project connected MQTT connections and web UI components with plugins written in Java / Kotlin.
To tests the projects validity, an automatic doorlock opener was developed. This doorlock plugin registered into the plugin systems, exposed its functionality over Websockets and normal HTTP Endpoints, and communicated over MQTT with two ESP8266, one responsible for reading chips, one for actuating the doorlock mechanism.
For roughly one year, this tool in actual use, until Smart Home V2 was developed as its replacement, due to repeating issues with the Eclipse MQTT Client Library.
The code can be documented as following:
.\gradlew :lib:dokkaHtml
.\gradlew :backend:dokkaHtmlTo use this Smarthome tool, you have to do the following:
There is only one test plugin to check whether your build works. It can be found in plugin_test
There is one default http controller. The controller resembles just an API. In order to use it, you should consider using the Smarthome_frontend repository.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10k1, R10k2, R10k3, R10k4 |
| 2 | C4.7uF | Capacitor_SMD:CP_Elec_4x5.4 | C4.7uF1, C4.7uF2 |
| 1 | 470Ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R470 |
| 1 | AMS1117-3.3 | AMS1117:SOT-223-3Lead_TabPin2 | AMS1117 |
| 1 | Conn_01x04_Female | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type059_RT06304HBWC_1x04_P3.50mm_Horizontal | ConnProg1 |
| 1 | Conn_01x08_Female | MFRC522:MFRC522_PinHeader | ConnMFRC1 |
| 1 | ESP-12E | esp:esp12f | ESP1 |
| 1 | Enable | button:Button | Enable1 |
| 1 | Prog | button:Button | Prog1 |
| 1 | Speaker_Ultrasound | buzzer:Buzzer_9mm_6mm | Beeper1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | USB1 |

andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers

iotmakervn/iot-wifi-uno-hw
Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno

andrewngai/HomekitKnock
This repo is the resources for the project on https://youtu.be/X5OxuFtGn0

BogdanTheGeek/ESP_RC
An Open-Source Transmitter/Receiver for RC Planes, Cars, Boats and more based on ESP-NOW

MakersFunDuck/Common-Kitchen-Timer-With-LCD-Replacement-Board
A replacement PCB board for common 4 digit 7 segment LCD kitchen timers.

KushlaVR/models-heart
Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…

atom-robotics-lab/ThermoGlow-Coaster
This project is an ESP12E based Temperature Controlled Smart Coaster. The project uses the following: ESP12E Module 12 x WS2812B SMD LEDs MLX90614 Temperature Sensor I2C Module Power Bank Charge-Boost Module for…

cyberstormdotmu/ESP12E-breakout
A simple and open source ESP12E/ ESP8266 breakout board. You will need an external programmer to program the module but most of the components required to run the module are present. Made with KiCad.
It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the ESP-12E and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the S4ndf1re/SmartHome repository on GitHub, at the commit this page was made from: the board is plugins_impl/plugin_doorlock_esp8266/esp8266_doorlock/test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).