
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Part 3 of pimpMyRide where i intergrate my previous 2 projects namely the Speedometer and the NeoPixel indicators, This time with proper schematics , a bit cleaner code etc
Integration arduino shield is an open-source printed circuit board by RudradevArya, from the RudradevArya/pimpMyRide repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 21 parts on 36 nets, routed with 101 tracks and 0 vias.
It is built around the WS2812B. Its parts include 4 resistors, 4 connectors, 3 capacitors, 3 switches and 1 diode. It belongs with the microcontroller boards boards of this library.
This project combines a speedometer functionality with an LED light controller for a bicycle or similar vehicle. It uses an Arduino board to read speed data from a magnetic sensor and control a series of LED light patterns.
Here's a task list for further development of the project:
For a complete list of parts, refer to tinkerCADParts list.png in the project root.
tinkerCAD circuit diagram.pngtinker_cad-schematics.pngKiCAD PCB screenshot.pngFor the most up-to-date schematic and PCB design, open the following files in KiCad:
intergration/integration-arduino-shield/integration.kicad_schintergration/integration-arduino-shield/integration.kicad_pcbWheel_circumference_in_Cm constant to match your wheel size.You can customize the LED patterns by modifying the Pattern1() through Pattern9() functions in the code. Adjust colors, timing, and sequences to create your desired effects.
PimpMyRide/
│
├── intergration/
│ ├── integration-arduino-shield/ (run the .pcb & .sch files from here)
│ ├── integration.kicad_sch
│ ├── integration.kicad_pcb
│
├── intergration.ino (the main arduino file to run)
├── tinkerCAD circuit diagram.png
├── tinkerCADParts list.png
├── tinker_cad-schematics.png
├── KiCAD PCB screenshot.png
└── README.mdThis project combines multiple functionalities and may require fine-tuning based on your specific hardware setup and requirements. Always ensure proper visibility and adhere to local regulations when using this on public roads.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4 |
| 4 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R2, R3, R4 |
| 3 | C_Polarized | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1, C2, C3 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3266W_Vertical | RV1 |
| 1 | SW_Push | Button_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW2 |
| 1 | SW_Reed | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | SW1 |
| 1 | SW_SPDT_MSM | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | SW4 |
| 1 | WC1602A | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | DS1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RudradevArya/pimpMyRide repository on GitHub, at the commit this page was made from: the board is integration_Old/integration-arduino-shield/integration-arduino-shield.kicad_pcb and its schematic integration-arduino-shield/integration-arduino-shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RudradevArya before reusing the design.