4 layers43.9 × 41 mm
Capteur
RubisCatty/Serre-Connecte
Projet final du programme de Génie Électrique par Sonia Michaud
43 parts
4 layers57.7 × 41 mm
Projet final du programme de Génie Électrique par Sonia Michaud
- Size
- 57.7 × 41 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 70
- Pads
- 246
- Tracks, vias
- 412, 75
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 May 2026
- Updated
- 24 May 2026
Overview
Serre is an open-source printed circuit board by RubisCatty, from the RubisCatty/Serre-Connecte repository on GitHub. It is a 4-layer board of 57.7 × 41 mm with 65 parts on 70 nets, routed with 412 tracks and 75 vias.
It is built around the ESP32-S3-WROOM-1-N8R8, SHT40-AD1B-R2 and CRCW080510K0FKEAC, with the CL21B105KPFNNNE, C0805F104K1RACAUTO and 1N5819HW-7-F-01 among its other parts. Its parts include 20 capacitors, 19 resistors, 6 ICs, 6 diodes and 4 connectors. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-S3-WROOM-1-N8R8
SMD,25.5x18mm-104.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
SHT40-AD1B-R2
DFN-4-EP(1.5x1.5)Temperature And Humidity SensorSensirion
CRCW080510K0FKEAC
0805-55℃~+155℃ 10kΩ 125mW Thick Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount
CL21B105KPFNNNE
080510V 1uF X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTC0805F104K1RACAUTO
0805- HWDG ROHSKEMETUncategorised
1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes IncorporatedCL21A475KAQNNNE
080525V 4.7uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCRCW08051K00FKEAC
0805-55℃~+155℃ 125mW 1kΩ Thick Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountRK73H2ATTD5101F
0805-55℃~+155℃ 150V 250mW 5.1kΩ Thick Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSKOA Speer ElectronicsChip Resistor - Surface MountB1701NB--20D000114U1930
0805Uncategorisedhongqiguang
SMF5.0A-TP
SOD-123FL-65℃~+175℃ 200W 21.7A 400uA 5V 6.4V 9.2V TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSMicro Commercial ComponentsESD And Surge Protection (TVS/ESD)CRG0805F220R
0805-55℃~+155℃ 125mW 220Ω Thick Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSTE ConnectivityChip Resistor - Surface Mount
README
README.mdSerre-Connecte
Projet final du programme de Génie Électrique par Sonia Michaud
Contient: Code source des trois modules: Maison, Serre et Capteur
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R11, R12, R13, R16, R29 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R9, R14, R15, R17, R18 |
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11, C12, C13, C20 |
| 4 | 10uF/16V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7, C9 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4 |
| 3 | 0.1uF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4 |
| 3 | 1N5819HW-7-F | Diode_SMD:D_SOD-123 | D1, D3, D5 |
| 3 | 4,7uF/10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15, C17 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad_TopOnly | H1, H2, H3 |
| 2 | 0.1uF/10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C18 |
| 2 | 10uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C8 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R8 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D4 |
| 1 | 0(?) | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19 |
| 1 | 1N4148WT | Diode_SMD:D_SOD-123F | D6 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | Boot | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | CF4224FH0R0-05-NH | Connector_FFC-FPC:Amphenol_F32Q-1A7x1-11024_1x24-1MP_P0.5mm_Horizontal | J2 |
| 1 | CSD13381F4 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | Connection a la batterie | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J3 |
| 1 | Connection moteur | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J4 |
| 1 | EN | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | NCP115ASN150T2G | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U3 |
| 1 | NCV7808BDTRKG | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | NCV8161BSN280T1G | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U4 |
| 1 | SHT40 | Footprints:SHT4X | U6 |
| 1 | TS1117BCW33 RPG | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
More from RubisCatty/Serre-Connecte
2- 4 layers57.7 × 41 mm
Maison
RubisCatty/Serre-Connecte
Projet final du programme de Génie Électrique par Sonia Michaud
42 parts
Similar boards
- 4 layers40 × 40 mm
Er tft0784-2-breakout
sndsgd/er-tft0784-2-breakout
Test PCB for an ER-TFT0784-2 MIPI DSI display
20 parts - 2 layers90 × 90 mm
ESP32 S3 WROOM2 N32R16
SolFV/Clasificador-de-objetos
El proyecto resuelve el control de calidad en líneas de empaquetado mediante un prototipo mecatrónico accesible y modular: una cinta transportadora desplaza cajas frente a una estación de inspección óptica (sensor…
36 parts1MIT - 4 layers191.2 × 190.9 mm
Neptune
Board-Folk/Neptune
Recreation of the cancelled Sega console that combines Mega Drive/Genesis with 32X.
379 parts180 - 4 layers154 × 81 mm
System candidate
bernardopg/ps28-modern-amp
Infinity Primus PS28 amplifier modernization: TPA3255 engineering, validation and safety-gated workflow
269 parts1 - 2 layers200 × 120 mm
Kinetic pcb
Game-Team-SLSC/eurobot-2026-robot
The repo for firmware and hardware and docs of the 2026 Game Team's robot for CDFR Junior
229 partsMIT - 4 layers203.8 × 115.3 mm
- 2 layers66 × 54 mm
Carrier
nherbaut/pico-power-sensor
This board sockets a Pico 2 W, provides five programmable green LEDs and a microSD slot, and connects to the INA229EVM through a left-edge right-angle socket.
38 parts - 4 layers101.6 × 76.2 mm
Pco2-sensor board
NOAA-PMEL/ASVCO2
Open Source Repository for the Autonomous Surface Vehicle CO2 (ASVCO2) gen2 system
154 parts
Questions
How big is the Serre PCB?
It measures 57.7 × 41 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Serre use?
65 parts, built around the ESP32-S3-WROOM-1-N8R8, SHT40-AD1B-R2, CRCW080510K0FKEAC and CL21B105KPFNNNE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Serre KiCad files?
From the RubisCatty/Serre-Connecte repository on GitHub, at the commit this page was made from: the board is KiCAD/Serre/Serre.kicad_pcb and its schematic KiCAD/Capteur/Capteur.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Serre design in my own project?
Its repository states no licence, so its author keeps all rights: ask RubisCatty before reusing the design.