
LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
QuadSignalDriverCK is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/RPi-RRCircuits repository on GitHub. It is a 2-layer board of 65 × 56 mm with 52 parts on 57 nets, routed with 434 tracks and 75 vias.
It is built around the MCP23017-E/SS. Its parts include 32 resistors, 4 transistors, 3 capacitors, 2 connectors and 1 IC. It belongs with the ESP32 boards of this library.
This is a SMD variant of 16DriverOutputHAT.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 150 Ohms | R1 | R5, R6, R7, R8, R13, R14, R15, R16, R21, R22, R23, R24, R29, R30, R31, R32 |
| 15 | 1K Ohms | R1 | R1, R2, R3, R4, R9, R10, R11, R17, R18, R19, R20, R25, R26, R27, R28 |
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | H1, H2, H3, H4 | |
| 4 | MPQ2222A | DIP-14__300 | Q1, Q2, Q3, Q4 |
| 1 | DWSLogoBCU | ||
| 1 | .1 uf | C1 | C1 |
| 1 | 10 uf, 50V | CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 10K Ohms | SIL-5 | RR1 |
| 1 | 15 uf, 50V | CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 1k Ohms | R1 | R12 |
| 1 | Address Jumper | pin_array_3x2 | J1 |
| 1 | H1 | ScrewTerm_2.54-5 | T1 |
| 1 | H2 | ScrewTerm_2.54-5 | T2 |
| 1 | H3 | ScrewTerm_2.54-5 | T3 |
| 1 | H4 | ScrewTerm_2.54-5 | T4 |
| 1 | MCP23017 | DIP-28__300 | U1 |
| 1 | RPi_GPIO | RPi_Hat:Pin_Header_Straight_2x20 | J0 |

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

mattchesters/zmk-apple-desktop-bus-keyboard
ZMK shield for Apple Desktop Bus Keyboard

ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

ktec-hq/ErgoDone
ErgoDox using pro micro. Original work by Dox. Brainhole association present


djbristow/RAILS
RAILS is a software model and implementation of an automated system to assist the model railroader achieve realism in the operation of a model railroad. The model then drives the development of software.



It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the MCP23017-E/SS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RobertPHeller/RPi-RRCircuits repository on GitHub, at the commit this page was made from: the board is QuadSignalDriverCK/QuadSignalDriverCK.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.