2 layers86.3 × 94.7 mm
2 layers55.3 × 71.6 mm
SAO AMAMW
Reid-n0rc/SAO_AMAMW- Size
- 55.3 × 71.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 16
- Pads
- 60
- Tracks, vias
- 66, 18
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Jun 2024
- Updated
- 17 Jul 2024
Overview
SAO AMAMW is an open-source printed circuit board by Reid-n0rc, from the Reid-n0rc/SAO_AMAMW repository on GitHub, published under the MIT licence. It is a 2-layer board of 55.3 × 71.6 mm with 28 parts on 16 nets, routed with 66 tracks and 18 vias.
It is built around the TPS61023DRL, CL21A106KOQNNNE and TCC0603COG1R0C500CT, with the XRCD54-1R0M, FRC0805J623TS and CH87062V200 among its other parts. Its parts include 10 resistors, 6 diodes, 5 capacitors, 1 IC and 1 connector.
Main components
6
TPS61023DRL
SOT-563-40℃~+125℃@(TJ) 1 1MHz 2.2V~5.5V 3A 3uA 500mV~5.5V Adjustable Boost Boost Built-in Overcurrent Protection、Light load efficient mode、Load disconnect Yes SOT-563 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
CL21A106KOQNNNE
080510uF 16V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
TCC0603COG1R0C500CT
06031pF 50V C0G 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSCCTCMultilayer Ceramic Capacitors MLCC - SMD/SMT
XRCD54-1R0M
SMD,5.2x4.5mm15mΩ 1uH 5.9A Unshielded Inductor ±20% SMD,5.2x4.5mm Power Inductors ROHSXRPower Inductors
FRC0805J623TS
0805-55℃~+155℃ 125mW 150V 62kΩ Thick Film Resistor ±100ppm/℃ ±5% 0805 Chip Resistor - Surface Mount ROHSFOJANChip Resistor - Surface MountCH87062V200
插件-40℃~+105℃ 2.54mm 250V 3A 插件 Wire To Board Connector ROHSCviluxWire To Board Connector
README
README.mdSAO_AMAMW
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 56 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R8 |
| 6 | LED | BadgePirates:LED_0807 | D1, D2, D3, D4, D5, D6 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C5 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R10 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 1uH | Inductor_SMD:L_Chilisin_BMRx00060630 | L1 |
| 1 | 499K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 66.5K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | Badgelife_sao_connector_v169bis | BadgePirateFootprints:Badgelife-SAOv169-SAO_Side_B.SLK | J1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP6 |
| 1 | TPS61023 | Package_TO_SOT_SMD:SOT-563 | U1 |
| 1 | ~ | drawing:AMAMW | X1 |
The 26 most common of 28 parts.
Similar boards
- 4 layers34 × 79.2 mm
Sensor epaper
Miceuz/paper-wifi
Low power E-paper display devboard with WiFi and BLE connectivity. Open source hardware.
92 parts28 - 2 layers38 × 25.1 mm
MistMaker Battery Kit V0-4
Dav1dyang/Programmable-Mist-Maker
An open-source, low-cost ultrasonic mist maker designed to share commercial humidifier circuits and empower creators with accessible, well-documented hardware.
105 parts26MIT - 2 layers70.7 × 70.7 mm
18650 BMS MkI
M-Poser56/CubeSat-Mjolnir
Repository for the Mjolnir CubeSat personal project, tracking all code and design material
38 parts20 - 2 layers44.7 × 93.6 mm
- 2 layers50.8 × 22.9 mm
Dispocam hub
olincollege/olin-eclipse-ballooning
Olin's National Eclipse Ballooning Project team repository
46 parts2GPL-3.0 - 2 layers29.5 × 70.5 mm
Key fob pcb
BenMartens15/reviveride-key-fob-pcb
This repo contains the schematic and PCB for the key fob. The firmware for the key fob can be found here: https://github.com/BenMartens15/reviveride-key-fob-firmware
27 parts1 - 2 layers84 × 78 mm
Fabricate Wireless Macropad
Catsarepro21/hackpad_v2
Wireless ESP32-S3 macropad: KiCad PCB, case STEP models, and Gerber/drill fabrication files.
78 parts
Questions
How big is the SAO AMAMW PCB?
It measures 55.3 × 71.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SAO AMAMW use?
28 parts, built around the TPS61023DRL, CL21A106KOQNNNE, TCC0603COG1R0C500CT and XRCD54-1R0M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SAO AMAMW KiCad files?
From the Reid-n0rc/SAO_AMAMW repository on GitHub, at the commit this page was made from: the board is CAD/SAO_AMAMW/SAO_AMAMW.kicad_pcb and its schematic CAD/SAO_AMAMW/SAO_AMAMW.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SAO AMAMW design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).