
Reaction Wheels L293DNE Board
M-Poser56/CubeSat-Mjolnir
Repository for the Mjolnir CubeSat personal project, tracking all code and design material

Repository for the Mjolnir CubeSat personal project, tracking all code and design material
18650 BMS MkI is an open-source printed circuit board by M-Poser56, from the M-Poser56/CubeSat-Mjolnir repository on GitHub. It is a 2-layer board of 70.7 × 70.7 mm with 38 parts on 28 nets, routed with 240 tracks and 0 vias.
It is built around the TPS61023DRL. Its parts include 10 resistors, 6 capacitors, 4 connectors, 3 ICs and 3 diodes. It belongs with the power boards of this library.
Repository for the Mjolnir CubeSat personal project, tracking all code and design material.
The Mjolnir CubeSat is a 10cm by 10cm by 10cm (1U) microsatellite complete with an onboard flight computer, sensor telemetry, radio module, a camera module, custom onboard BMS, onboard attitude control via reaction wheels and custom motor control PCB.
There is also a fully custom groundstation consisting of a python backend and JS frontend, meant to interface with an Arduino Uno running a script to interface with a matching LoRa radio module to the CubeSat.
Had a blast making this, design doc covers everything and is worth a read!

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1x2MaleGPIO | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4 |
| 3 | Schottky, Vf 430mV | Diode_SMD:D_SMB | D1, D2, D3 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 5100 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | Solar_Input_1, Solar_Input_2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 10k NTC therm | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 1100 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 18650_Holder | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 1uH | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 2200 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 732k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 750 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | CHG_LED | LED_SMD:LED_1206_3216Metric | CHG_LED1 |
| 1 | CHG_NMOS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | DSG_NMOS | Package_TO_SOT_SMD:SOT-23-3 | Q2 |
| 1 | PGOOD_LED | LED_SMD:LED_1206_3216Metric | PGOOD_LED1 |
| 1 | TI-BQ24074 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias | U2 |
| 1 | TI-BQ29704 | BQ29704:DSE0006A | U1 |
| 1 | TPS61023 | Package_TO_SOT_SMD:SOT-563 | U3 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | USB-C_Female1 |

M-Poser56/CubeSat-Mjolnir
Repository for the Mjolnir CubeSat personal project, tracking all code and design material

Miceuz/paper-wifi
Low power E-paper display devboard with WiFi and BLE connectivity. Open source hardware.

Dav1dyang/Programmable-Mist-Maker
An open-source, low-cost ultrasonic mist maker designed to share commercial humidifier circuits and empower creators with accessible, well-documented hardware.


olincollege/olin-eclipse-ballooning
Olin's National Eclipse Ballooning Project team repository

BenMartens15/reviveride-key-fob-pcb
This repo contains the schematic and PCB for the key fob. The firmware for the key fob can be found here: https://github.com/BenMartens15/reviveride-key-fob-firmware

Catsarepro21/hackpad_v2
Wireless ESP32-S3 macropad: KiCad PCB, case STEP models, and Gerber/drill fabrication files.


It measures 70.7 × 70.7 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the TPS61023DRL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the M-Poser56/CubeSat-Mjolnir repository on GitHub, at the commit this page was made from: the board is Design_Documentation/KiCAD/18650_BMS_MkI/18650_BMS_MkI.kicad_pcb and its schematic Design_Documentation/KiCAD/18650_BMS_MkI/18650_BMS_MkI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask M-Poser56 before reusing the design.