2 layers300 × 320 mm
2 layers86.3 × 94.7 mm
JiggleBilly
Shenanigans-R-Us/jigglebilly-badge- Size
- 86.3 × 94.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 8
- Pads
- 18
- Tracks, vias
- 25, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Jan 2024
- Updated
- 10 Jul 2024
Overview
JiggleBilly is an open-source printed circuit board by Shenanigans-R-Us, from the Shenanigans-R-Us/jigglebilly-badge repository on GitHub. It is a 2-layer board of 86.3 × 94.7 mm with 10 parts on 8 nets, routed with 25 tracks and 0 vias.
It is built around the RMCF0805FT90R9, XZVG45WT-9 and CH87062V200. Its parts include 2 resistors, 2 diodes and 1 crystal.
Main components
3
RMCF0805FT90R9
0805-55℃~+155℃ 125mW 150V 90.9Ω Thick Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface Mount
XZVG45WT-9
PLCC-2-40℃~+85℃ 120° 2.1V 20mA 570nm 574nm 75mW 98mcd Emerald Green Water Clear PLCC-2 LED Indication - Discrete ROHSSunLEDLED Indication - DiscreteCH87062V200
插件-40℃~+105℃ 2.54mm 250V 3A 插件 Wire To Board Connector ROHSCviluxWire To Board Connector
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | LOGO | LOGO | G***, G***, G***, G***, G*** |
| 2 | 90.9 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | LED | BadgePirates_Common_Library-master:LED_Osram_Lx_P47F_D2mm_ReverseMount_Proper_Mask Only | D2, D3 |
| 1 | Badgelife_sao_connector_v169bis | BadgePirates_Common_Library-master:Badgelife-SAOv169-SAO_Side_B.SLK | X1 |
Similar boards
- 2 layers55.3 × 71.6 mm
- 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k
Questions
How big is the JiggleBilly PCB?
It measures 86.3 × 94.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the JiggleBilly use?
10 parts, built around the RMCF0805FT90R9, XZVG45WT-9 and CH87062V200. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the JiggleBilly KiCad files?
From the Shenanigans-R-Us/jigglebilly-badge repository on GitHub, at the commit this page was made from: the board is CAD/JiggleBilly/Lib/JiggleBilly_SAO_V1/JiggleBilly.kicad_pcb and its schematic CAD/JiggleBilly/Lib/JiggleBilly_SAO_V1/JiggleBilly.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the JiggleBilly design in my own project?
Its repository states no licence, so its author keeps all rights: ask Shenanigans-R-Us before reusing the design.