

Voltage adjuster
- Size
- 16 × 15 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 24
- Nets
- 15
- Pads
- 61
- Tracks, vias
- 166, 24
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 May 2026
- Updated
- 19 Aug 2026
Overview
Voltage adjuster is an open-source printed circuit board by RasmusKoit, from the RasmusKoit/voltage_adjuster repository on GitHub. It is a 2-layer board of 16 × 15 mm with 24 parts on 15 nets, routed with 166 tracks and 24 vias.
It is built around the LDK130PU-R, LMK107B7105KA-T and LMK107BJ475KA-T, with the CRG0603F5K1, CRG0603F1K5 and CRG0603F56K among its other parts. Its parts include 8 resistors, 4 capacitors, 2 ICs, 1 diode and 1 connector.
Main components
7LDK130PU-R
DFN-6L(1.2x1.3)-40℃~+125℃@(Tj) 1 300mA 30uA 400mV@(300mA) 5.5V 55dB@(10kHz) 800mV~5.1V Adjustable Over Current Protection、Over Temperature Protection、Enable Positive DFN-6L(1.2x1.3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLMK107B7105KA-T
060310V 1uF X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMTLMK107BJ475KA-T
060310V 4.7uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMTCRG0603F5K1
0603-55℃~+155℃ 100mW 5.1kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSTE ConnectivityChip Resistor - Surface MountCRG0603F1K5
0603-55℃~+155℃ 1.5kΩ 100mW 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSTE ConnectivityChip Resistor - Surface MountCRG0603F56K
0603-55℃~+155℃ 100mW 56kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSTE ConnectivityChip Resistor - Surface MountLTST-C190KRKT
0603-30℃~+85℃ 130° 20mA 2V 62.5mW 631nm 639nm 99mcd Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP4, TP5 |
| 3 | Jumper_2_Small_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 124k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 316k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 88.7k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | LDK130PU-R | footprints_symbols:LDK130PUR | IC1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MCP73832T-2ACI_MC | footprints_symbols:SON50P300X200X100-9N-D | IC2 |
| 1 | TestPoint_Small | Art:Salt-8x8 | TP3 |
| 1 | UJC-H-G-SMT-1-P6-TR | footprints_symbols:UJCHGSMT1P6TR | J1 |
More from RasmusKoit/voltage_adjuster
1- 2 layers94 × 75 mm

Similar boards
- 4 layers40.8 × 40.8 mm

- 4 layers70 × 70 mm

Blue interface board
BetzDrive/interface-board
Power and signal conditioning board for the Betz Drive system
130 parts5 - 4 layers80 × 60 mm

- 4 layers40 × 30 mm

Health Watch
abendezu10/PulseWatch
Developed a fully functional smartwatch using an STM32 microcontroller, featuring real-time heart rate monitoring.
37 parts - 4 layers16.5 × 10.9 mm

- 2 layers142.1 × 106 mm

- 6 layers112 × 98 mm

- 4 layers50 × 65 mm

FeroFlyF405
Ozonised/FeroFlyF405
FeroFlyF405 an open source STM32F405 based flight controller running INAV
150 parts44CERN-OHL-P-2.0
Questions
How big is the Voltage adjuster PCB?
It measures 16 × 15 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Voltage adjuster use?
24 parts, built around the LDK130PU-R, LMK107B7105KA-T, LMK107BJ475KA-T and CRG0603F5K1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Voltage adjuster KiCad files?
From the RasmusKoit/voltage_adjuster repository on GitHub, at the commit this page was made from: the board is voltage_adjuster.kicad_pcb and its schematic voltage_adjuster.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Voltage adjuster design in my own project?
Its repository states no licence, so its author keeps all rights: ask RasmusKoit before reusing the design.