Skip to the content
2 layers296.7 × 147.1 mmRoard, the printed circuit board in 3D

Roard is a custom, fully wireless split ergonomic keyboard inspired by the Lily58. It features a custom KiCad-designed PCB, a 3D-printed enclosure, and runs on ZMK firmware utilizing a 3-node nice!nano setup with Nordic Enhanced ShockBurst (ESB).

Size
296.7 × 147.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
237
Nets
124
Pads
789
Tracks, vias
861, 142
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Apr 2026
Updated
15 Apr 2026

Overview

Roard is an open-source printed circuit board by Rapter2310, from the Rapter2310/roard-split-ergo repository on GitHub, published under the MIT licence. It is a 2-layer board of 296.7 × 147.1 mm with 237 parts on 124 nets, routed with 861 tracks and 142 vias.

It is built around the SSSS811101. Its parts include 68 switches, 64 diodes, 4 connectors and 2 ICs. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

Main components

1

README

README.md

Roard Keyboard

Roard is a custom wireless split keyboard I designed, heavily based on the Lily58. The main physical difference is the layout. I modified it to include a dedicated arrow key cluster on the right half.

The biggest technical difference is the wireless setup. Instead of standard Bluetooth, I'm using a 3-node Nordic Enhanced ShockBurst (ESB) configuration. The left and right halves connect to a third nice!nano plugged into the PC acting as a dedicated dongle, which fixes the latency and connection drops you sometimes get with standard BLE splits.

Hardware Details

  • Controllers: 3x nice!nano v2 (left, right, and central dongle).
  • Displays: 2x nice!view screens.
  • Switches & Sockets: Gateron Aliaz (silent tactiles) seated in Kailh MX hotswap sockets.
  • Power: 3.7v 110mAh LiPo batteries.
  • Components & Assembly: Sourced all the board-level SMD components (diodes, power/reset switches, battery connectors, and sockets) directly from Typeractive, and assembled the board using Kester solder wire.
  • Design Tools: The core layout was built in Keyboard Layout Editor (KLE). I initially used the ai03 plate generator for rapid prototyping to test different angles and ergonomics before committing to the board design. To map the final physical matrix to the firmware, I used the ZMK Physical Layout Converter to translate the KLE JSON directly into ZMK layout macros. The raw design files are in the /design folder.
  • PCB: Custom routed in KiCad. Once the routing and standoff placements were finalized, I exported the board as a STEP file to serve as the foundation for the mechanical design.

Case & Mechanical

I modeled the enclosure from scratch in Onshape. To guarantee perfect switch alignment and mounting hole clearance, I imported the KiCad STEP file directly into my Onshape workspace and traced the final switch plates and case standoffs around the exact geometry of the PCB.

I used a few different materials for the 3D printed parts depending on what they needed to do:

  • Case & Switch Plate: PETG for general strength.
  • Tenting Kit: TPU so it actually grips the desk and dampens the sound a bit.
  • Display Covers: PLA to protect the nice!view screens. Everything is held together with standard brass standoffs.

Current Status & WIP

The board is fully functional as my daily driver, but I'm currently working on two main things:

  1. Customizing the nice!view Screens: Switching from standard BLE to the ESB dongle setup breaks the standard nice!view widget implementation, which relies on BLE Zephyr services to report full connection states. Currently, the screens are running a basic fallback ZMK display profile that only outputs battery levels. I am actively rewriting the display logic to pull layer information and connection states over the ESB protocol to restore full functionality.
  2. Custom Keycaps: I'm in the process of generating and 3D printing a custom keycap profile using PseudoMakeMeKeyCapProfiles.

Repository Structure

  • /design: KLE json files and prototyping assets.
  • /docs: Photos of the finished board, the PCB, and the tenting kit.
  • /firmware: ZMK config files, custom shield definitions, and ESB dongle setup.
  • /hardware: KiCad project files, schematics, and production-ready Gerbers.
  • /mechanical: STLs for 3D printing and STEP files exported from Onshape.

Parts

237
QtyValueFootprintReferences
67, , , , , , , , , , , , , , , +51
64DDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48
64SW_PushPCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MXSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +48
2Conn_01x02Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ1, J3
2Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2, J4
2EVQ-PUC02KSamacSys_Parts:EVQPUC02KS2, S4
2SSSS811101SamacSys_Parts:SSSS811101S1, S3
2nice_nanonice_nano:nice_nano_pinChangeU1, U2
2tabyuchi_kbd:breakaway04H4, H15

The 207 most common of 237 parts.

More from Rapter2310/roard-split-ergo

1
  • 2 layers146.9 × 115.9 mmLeft, the printed circuit board in 3D

    Left

    Rapter2310/roard-split-ergo

    Roard is a custom, fully wireless split ergonomic keyboard inspired by the Lily58. It features a custom KiCad-designed PCB, a 3D-printed enclosure, and runs on ZMK firmware utilizing a 3-node nice!nano setup with Nordic…

    75 partsMIT

Similar boards

  • 2 layers50 × 70 mmLcdtap rp2350, the printed circuit board in 3D

    Lcdtap rp2350

    shapoco/lcdtap

    A tool for mirroring or capturing I2C/SPI LCD displays

    100 parts85
  • 4 layers66.9 × 87 mmMeshtasticNode BQ25185, the printed circuit board in 3D

    MeshtasticNode BQ25185

    h0lad/SolarMeshtasticNode

    This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.

    49 parts40CERN-OHL-S-2.0
  • 4 layers110 × 64 mmSYCL Badge 2024, the printed circuit board in 3D

    SYCL Badge 2024

    ZigEmbeddedGroup/sycl-badge

    The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/

    145 parts39
  • 4 layers108 × 50 mmFED3, the printed circuit board in 3D

    FED3

    KravitzLabDevices/FED3

    Feeding Experimentation Device version 3

    114 parts36GPL-3.0
  • 2 layers44.4 × 14.2 mmBridge v1, the printed circuit board in 3D

    Bridge v1

    chrisg20/CarThingBridge

    A compact connector board for the Spotify Car Thing and Raspberry Pi Zero.

    9 parts30CC0-1.0
  • 2 layers94 × 85 mmSumoBot, the printed circuit board in 3D

    SumoBot

    ErichStyger/McuMiniSumoRobot

    Mini Sumo Robot

    86 parts25
  • 4 layers48 × 45.5 mmLoRaHarvesterBox, the printed circuit board in 3D

    LoRaHarvesterBox

    h0lad/LoRaHarvesterBox

    PCB integrating a ST STM32WLE5CC and TI BQ25570 energy harvester. Ideal platform for ultra-low-power LoRa(WAN) nodes projects.

    46 parts11CERN-OHL-S-2.0

Questions

How big is the Roard PCB?

It measures 296.7 × 147.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Roard use?

237 parts, built around the SSSS811101. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Roard KiCad files?

From the Rapter2310/roard-split-ergo repository on GitHub, at the commit this page was made from: the board is hardware/kicad/roard.kicad_pcb and its schematic hardware/kicad/roard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Roard design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).