

BMS磷酸铁锂电池管理系统;STM32F103cbt6 & bq76920 #非商业化
- Size
- 53.5 × 38 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 129
- Nets
- 112
- Pads
- 401
- Tracks, vias
- 697, 161
- Pours
- 163
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Oct 2024
- Updated
- 20 Mar 2025
Overview
CawBMS is an open-source printed circuit board by Randycarteronion, from the Randycarteronion/BMS_F.F.R_R.C repository on GitHub. It is a 4-layer board of 53.5 × 38 mm with 129 parts on 112 nets, routed with 697 tracks and 161 vias.
It is built around the TCAN1044DRBRQ1, BQ7692003PW and CSD13381F4, with the BSC0702LS, B3U-1000P and TP0610K-T1-GE3 among its other parts. Its parts include 39 resistors, 28 capacitors, 12 diodes, 10 transistors and 6 connectors. It belongs with the STM32 boards of this library.
Main components
7TCAN1044DRBRQ1
SON-8(3x3)-40℃~+125℃ 1uA 4.5V~5.5V 70mA 8Mbps CAN FD Transceiver SON-8(3x3) CAN Transceivers ROHSTexas InstrumentsCAN TransceiversBQ7692003PW
TSSOP-20-40℃~+85℃ 3~5 50mA 60uA 6V~25V I2C Lithium Battery、LiFePO4 Battery Overcurrent Protection、Short-Circuit Protection、电芯均衡、过压保护、Undervoltage Protection Protection IC、Balancing IC Support TSSOP-20 Battery Management ROHSTexas InstrumentsBattery ManagementCSD13381F4
PicoStar-3-55℃~+150℃ 1 N-channel 1.1V 1.4nC@4.5V 12V 2.1A 200pF 3.3pF 400mΩ@1.8V 500mW 62pF N-Channel PicoStar-3 MOSFETs ROHSTexas InstrumentsMOSFETsBSC0702LS
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 2.3V 2.7mΩ@10V 30nC@4.5V 4.4nF 58pF 60V 83W 84A TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsB3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile SwitchesTP0610K-T1-GE3
SOT-231 P-Channel 1.7nC@15V 10pF 185mA 23pF 350mW 3V 5pF 60V 6Ω@10V P-Channel SOT-23 MOSFETs ROHSVishay IntertechnologyMOSFETsWAFER-SH1.0-6PWB
SMD,P=1mm,卧贴-40℃~+85℃ 1 1A 1mm 1x6P 3.15mm 4.3mm 50V 6 6P 8.35mm Auxiliary Solder Pin Beige Brass LCP SH Surface Mount, Right Angle Tin SMD,P=1mm,卧贴 Wire To Board Connector ROHSXUNPUWire To Board Connector
README
README.mdCawBMS - 锂电池管理系统
🕹 简介
CawBMS 是一套基于 STM32F103 和 BQ76920 的锂电池管理系统。
所有设计资料基于 MIT 协议开源,欢迎大家复刻
🛠 功能
| 名称 | 开发状态 | 测试状态 | 名称 | 开发状态 | 测试状态 |
|---|---|---|---|---|---|
| 开机 | ✔ | ✔ | 欠压保护 | ✔ | ✔ |
| 关机 | ✔ | ✔ | 单节电压监测 | ✔ | ✔ |
| 初始化 | ✔ | ✔ | 电池组电压监测 | ✔ | ✔ |
| 短路保护 | ✔ | ❌ | 电流监测 | ✔ | ✔ |
| 过流保护 | ✔ | ✔ | SOC | ❌ | ❌ |
| 过压保护 | ✔ | ✔ | SOH | ❌ | ❌ |
| 充电被动均衡 | ✔ | ✔ | 上位机 | ❌ | ❌ |
📰 目录
-
Docs: 项目相关文档
-
GUI:上位机软件
-
PCB:硬件设计
-
Shell:相关外壳设计
-
Firmware:固件
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C21, C22, C23 |
| 11 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R4, R5, R8, R18, R20, R22, R24, R26, R29 |
| 9 | 100 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R17, R19, R21, R23, R25, R27, R30, R31, R35 |
| 6 | 0.22uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C10, C11, C12, C13, C14 |
| 5 | 28.7 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R13, R14, R15, R16 |
| 5 | CSD13381F4 | Rick_MOSFET:CSD13381F4_PICOSTAR-3_L1.0-W0.6-P0.40-S0.65-BL-1 | Q1, Q2, Q3, Q4, Q5 |
| 5 | D_Zener_5.6V | Diode_SMD:D_SOD-523 | D4, D5, D6, D7, D8 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25, C26, C27, C28 |
| 4 | 220ohm | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3, L4, L5, L6 |
| 4 | BSC0702LS | Rick_MOSFET:BSC0702LS_PG-TDSON-8_L5.0-W6.0-P1.27-BL-EP | Q6, Q7, Q8, Q9 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | 0.0015 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R32, R33, R34 |
| 3 | 1M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R36, R39, R40 |
| 3 | 510 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R9, R10 |
| 3 | B3U-1000P | Rick_Switch:B3U-1000P | SW1, SW2, SW3 |
| 3 | LED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1, D2, D3 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R37 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17, C18 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15, C20 |
| 2 | SWD | Rick_Connector:CONN-SMD_4P-P1.00_WAFER-SH1.0-4PWB | CN1, CN5 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19 |
| 1 | 120 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 1uH | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L2 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16 |
| 1 | 39nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | 470pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C24 |
| 1 | 499k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R38 |
| 1 | B+ | CawBMS:POWER_PAD | H5 |
| 1 | B- | CawBMS:POWER_PAD | H6 |
| 1 | BQ7692003PW | Rick_BMS:BQ7692003PW_TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL | U4 |
| 1 | CAN | Rick_Connector:CONN-SMD_2P-P1.00_XUNPU_WAFER-SH1.0-2PWB | U5 |
| 1 | Crystal_16MHz_15pF_3P | Rick_Crystal:Crystal_SMD3213-3P | X1 |
| 1 | D_100V | Diode_SMD:D_SOD-323_HandSoldering | D11 |
| 1 | D_200V | Diode_SMD:D_SMA_Handsoldering | D10 |
| 1 | D_Zener_16V | Diode_SMD:D_SOD-523 | D12 |
| 1 | G*** | kibuzzard-6577EBC9 | kibuzzard-6577EBC9 |
| 1 | G*** | kibuzzard-6577F12B | kibuzzard-6577F12B |
| 1 | G*** | kibuzzard-658FE679 | kibuzzard-658FE679 |
| 1 | G*** | kibuzzard-6577EBAB | kibuzzard-6577EBAB |
| 1 | G*** | kibuzzard-6582907D | kibuzzard-6582907D |
| 1 | G*** | kibuzzard-65829086 | kibuzzard-65829086 |
| 1 | G*** | kibuzzard-6577EC0F | kibuzzard-6577EC0F |
| 1 | G*** | kibuzzard-658FE662 | kibuzzard-658FE662 |
| 1 | G*** | kibuzzard-6577EC47 | kibuzzard-6577EC47 |
| 1 | I2C | Rick_Connector:CONN-SMD_4P-P1.00_WAFER-SH1.0-4PWB | CN2 |
| 1 | LOGO | Rick_Logo:guaik_logo_black_8x8 | G*** |
| 1 | NTC 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R28 |
| 1 | P+ | CawBMS:POWER_PAD | H7 |
| 1 | P- | CawBMS:POWER_PAD | H8 |
| 1 | SPI | Rick_Connector:CONN-SMD_6P-P1.00_XUNPU_WAFER-SH1.0-6PWB | CN3 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TCAN1044DRBRQ1 | Rick_CAN:TCAN1044DRBRQ1_DFN-8_L3.0-W3.0-P0.65-TL-EP2.4 | U2 |
| 1 | TP0610K-T1-GE3 | Package_TO_SOT_SMD:SOT-23 | Q10 |
| 1 | TPS61240DRVR | Rick_DC-DC:TPS61240DRVR_WSON-6_L2.0-W2.0-P0.65-TL-EP | U3 |
| 1 | TVS_24V | Diode_SMD:D_SMA_Handsoldering | D9 |
| 1 | USART | Rick_Connector:CONN-SMD_4P-P1.00_WAFER-SH1.0-4PWB | CN4 |
| 1 | WAFER-SH1.0-6PWB | Rick_Connector:CONN-SMD_6P-P1.00_XUNPU_WAFER-SH1.0-6PWB | CN6 |
The 128 most common of 129 parts.
Similar boards
- 4 layers55 × 55 mm

- 2 layers79 × 89 mm

Bms v1
azerimaker/BMS_3-5S
3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.
175 parts22 - 2 layers89.5 × 69.2 mm

- 4 layers50 × 42 mm

- 4 layers44 × 43 mm

Pico mini
Ncerzzk/luckyfox_pico_mini_FC
A flight controller hardware based on LucyFox Pico Mini Board
50 partsGPL-3.0 - 4 layers60 × 62 mm

IEMU Base DB
ponderononon/IEMU_DevBoards
Kicad Schematic Files for the BASE and SENSOR Development Boards (Layout in Progress)
176 parts - 6 layers50 × 42 mm

- 4 layers57.7 × 41 mm

Serre
RubisCatty/Serre-Connecte
Projet final du programme de Génie Électrique par Sonia Michaud
65 parts
Questions
How big is the CawBMS PCB?
It measures 53.5 × 38 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CawBMS use?
129 parts, built around the TCAN1044DRBRQ1, BQ7692003PW, CSD13381F4 and BSC0702LS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CawBMS KiCad files?
From the Randycarteronion/BMS_F.F.R_R.C repository on GitHub, at the commit this page was made from: the board is caw-bms-master/PCB/CawBMS.kicad_pcb and its schematic caw-bms-master/PCB/BQ76920.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CawBMS design in my own project?
Its repository states no licence, so its author keeps all rights: ask Randycarteronion before reusing the design.