
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Design files & assembly resources for the WiFi Nugget
Nugget PCB is an open-source printed circuit board by RakhithJK, from the RakhithJK/WiFi-Nugget-Hardware repository on GitHub. It is a 2-layer board of 42 × 59 mm with 25 parts on 17 nets, routed with 111 tracks and 6 vias.
It is built around the WS2812B. Its parts include 4 switches, 1 IC and 1 diode. It belongs with the radio and wireless boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 1 | Down | Button_Switch_SMD:SW_SPST_FSMSM | SW2 |
| 1 | Left | Button_Switch_SMD:SW_SPST_FSMSM | SW3 |
| 1 | Right | Button_Switch_SMD:SW_SPST_FSMSM | SW4 |
| 1 | SH1106 | screens:SH1106-128x64-OLED | Brd1 |
| 1 | Up | Button_Switch_SMD:SW_SPST_FSMSM | SW1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm_idiot_proof | D1 |
| 1 | WeMos D1 Mini | wemos-d1-mini:wemos-d1-mini-with-pin-header-and-connector | U1 |
The 22 most common of 25 parts.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 42 × 59 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RakhithJK/WiFi-Nugget-Hardware repository on GitHub, at the commit this page was made from: the board is Nugget-PCB/Nugget-PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RakhithJK before reusing the design.