
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

All files pertaining to the PPM2PWM device are placed in this repository. These files include: 1. Schematic and PCB KICAD files. 2. MPLABX project in C for firmware.
ARES PCB 1 is an open-source printed circuit board by Raisintoe, from the Raisintoe/PPM2PWM repository on GitHub. It is a 2-layer board with 56 parts on 76 nets, routed with 246 tracks and 2 vias.
It is built around the PIC16F74-I/PT and FT232RL. Its parts include 25 resistors, 15 connectors, 10 capacitors, 2 ICs and 1 diode. It belongs with the PIC boards of this library.
All files pertaining to the PPM2PWM device are placed in this repository. These files include: 1. Schematic and PCB KICAD files. 2. MPLABX project in C for firmware.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R12, R13, R14, R15, R16, R17, R18, R19, R20, R23 +3 |
| 8 | Screw_Terminal_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1, J2, J3, J4, J7, J8, J9, J10 |
| 5 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R11, R21, R22, R24 |
| 4 | 0.01uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C7, C8, C9, C10 |
| 4 | 0.1uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C2, C3, C4, C5 |
| 4 | Conn_01x01_MountingPin | Connector:Derek's_Banana_Jack_1Pin | J11, J12, J13, J14 |
| 2 | Screw_Terminal_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5, PowerIn1 |
| 1 | 100nF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1 |
| 1 | 10nF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C6 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R25 |
| 1 | Derek's_SW_MEC_5G | Button_Switch_THT:Derek's_SW_PUSH_8.89mm_H4.3mm | MCLR_Reset1 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | MPMOS | Package_TO_SOT_SMD:A19T_Handsoldering | M1 |
| 1 | PIC16F74-IP | Package_DIP:DIP-40_W15.24mm_LongPads | U2 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Wuerth_Horizontal_1.70mm(0.0625in)_spacing | J6 |

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube



Ledger-Donjon/silicon-toaster
SiliconToaster is an open-source hardware electromagnetic fault injection device, designed for hardware security research. It has the following features:


jsjolund/dmx512-controller-board
Controller board for DMX512 compatible devices, built around the STM32F4 processor

56 parts, built around the PIC16F74-I/PT and FT232RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Raisintoe/PPM2PWM repository on GitHub, at the commit this page was made from: the board is ARES_PCB_1/ARES_PCB_1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Raisintoe before reusing the design.