Skip to the content
2 layers60 × 86.1 mmControlo Luminosidade, the printed circuit board in 3D
Size
60 × 86.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
51
Nets
33
Pads
148
Tracks, vias
249, 1
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Nov 2025
Updated
11 Jan 2026

Overview

Controlo Luminosidade is an open-source printed circuit board by RafaelVafonso, from the RafaelVafonso/LABSI-LUMINOSIDADE repository on GitHub. It is a 2-layer board of 60 × 86.1 mm with 51 parts on 33 nets, routed with 249 tracks and 1 via.

It is built around the ATMEGA328-PU, IRLZ24PBF and SMF7.0A. Its parts include 17 capacitors, 13 connectors, 8 resistors, 2 ICs and 2 diodes. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.

Main components

3

Parts

51
QtyValueFootprintReferences
100.1uCapacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC2, C5, C6, C7, C8, C11, C13, C15, C16, C18
510kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R3, R6, R7, R9
3100uCapacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mmC1, C12, C14
3Touch ButtonConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ10, J11, J12
210uCapacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mmC10, C17
222pCapacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC3, C4
2Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ1, J2
2Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ7, J8
2Conn_01x04_PinConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ4, J5
2Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ3, J9
110Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR10
116MCrystal:Crystal_HC49-4H_VerticalY1
1220Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2
16.8kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR8
1ATmega328-PPackage_DIP:DIP-28_W7.62mmU1
1AVR-ISP-6Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ6
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1ESP32Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ13
1Fuse0ADKP9160-RE:FUSAD2722W65L2250D600F1
1GREEN-LEDLED_THT:LED_D5.0mmD1
1I2C_4PINConnector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_VerticalU4
1IRLZ24Package_TO_SOT_THT:TO-220-3_VerticalQ1
1LOGOimagens:image1G***
1SMF7.0APCM_JLCPCB:D_SMAD3

The 47 most common of 51 parts.

More from RafaelVafonso/LABSI-LUMINOSIDADE

1

Similar boards

  • 2 layers62 × 35 mmMini Inverter, the printed circuit board in 3D

    Mini Inverter

    MatthewSchaar/DC-to-AC-push-pull-inverter-PCB

    DC-to-AC push-pull inverter, 12 V to 240 V, designed from scratch in KiCad - schematic, PCB layout, a custom 3D model written in Python, and a full manufacturing file set.

    19 parts1
  • 2 layers63.5 × 35.6 mmMini Inverter 12V to 240V, the printed circuit board in 3D

    Mini Inverter 12V to 240V

    Nikhil-Misal-24/Mini-Power-Inverter-12V-DC-to-240V-AC-

    Mini Inverter – 12V DC to 240V AC Designed and developed a compact inverter PCB that converts 12V DC battery input into 240V AC output using oscillator, MOSFET switching, and step-up transformer stages.

    20 parts1
  • 2 layers59.5 × 29.5 mmMini inverter, the printed circuit board in 3D

    Mini inverter

    anish1732/Mini-Inverter-PCB-Design-KiCAD-

    This repository contains the complete KiCad project files, schematics, PCB layout, and fabrication outputs for a mini inverter circuit.

    21 partsMIT
  • 2 layers53.8 × 28 mmMini Inverter, the printed circuit board in 3D

    Mini Inverter

    Bala-Kumaran-M/Mini_Inverter_Kicad

    Designed a compact DC-to-AC inverter circuit for converting low-voltage DC into AC output, focusing on schematic design, PCB layout, component selection, and practical hardware implementation.

    20 parts
  • 2 layers62.5 × 37 mmInverter, the printed circuit board in 3D

    Inverter

    Maurya-sys/Mini_inverter_PCB

    My first PCB design project in KiCad. Learning PCB design and open to feedback, suggestions, and constructive criticism.

    19 parts
  • 2 layers95.2 × 74.9 mmSpoje pcb, the printed circuit board in 3D

    Spoje pcb

    moskyt/spoje

    Firmware telefonni ustredny pro Hvozdy.

    31 parts
  • 2 layers60.5 × 42 mmConverter vers0, the printed circuit board in 3D

    Converter vers0

    Ons-Nouri/dc-dc-mini-converter-kicad

    19 parts
  • 4 layers100 × 100 mmPinball Matrix board Rev 1 routed power, the printed circuit board in 3D

    Pinball Matrix board Rev 1 routed power

    Phil-CIA/Pinball-Sw-Lamp-Matrix-

    This project Build 8 row x 4 row lamp and a 8x 4 switch matrix scanner board For The Captain Fantastic - Home Edition Pinball Machine

    154 parts

Questions

How big is the Controlo Luminosidade PCB?

It measures 60 × 86.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Controlo Luminosidade use?

51 parts, built around the ATMEGA328-PU, IRLZ24PBF and SMF7.0A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controlo Luminosidade KiCad files?

From the RafaelVafonso/LABSI-LUMINOSIDADE repository on GitHub, at the commit this page was made from: the board is LABSI/Controlo_Luminosidade/Controlo_Luminosidade.kicad_pcb and its schematic LABSI/Controlo_Esquematico/Controlo_Esquematico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controlo Luminosidade design in my own project?

Its repository states no licence, so its author keeps all rights: ask RafaelVafonso before reusing the design.