
Mini Inverter
MatthewSchaar/DC-to-AC-push-pull-inverter-PCB
DC-to-AC push-pull inverter, 12 V to 240 V, designed from scratch in KiCad - schematic, PCB layout, a custom 3D model written in Python, and a full manufacturing file set.

My first PCB design project in KiCad. Learning PCB design and open to feedback, suggestions, and constructive criticism.
Inverter is an open-source printed circuit board by Maurya-sys, from the Maurya-sys/Mini_inverter_PCB repository on GitHub. It is a 2-layer board of 62.5 × 37 mm with 19 parts on 16 nets, routed with 264 tracks and 8 vias.
It is built around the IR2153PBF and IRLZ24PBF. Its parts include 6 resistors, 4 capacitors, 3 diodes, 2 transistors and 1 IC. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R3, R6 |
| 3 | 22K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R4, R5 |
| 2 | IRLZ24 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | 0.01uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 0.2uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 1 | 10K | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | 12V | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | BT1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | IR2153 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | LED | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | D2 |
| 1 | LED | LED_THT:LED_D5.0mm | D3 |
| 1 | Transformer_1P_SS | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | T1 |

MatthewSchaar/DC-to-AC-push-pull-inverter-PCB
DC-to-AC push-pull inverter, 12 V to 240 V, designed from scratch in KiCad - schematic, PCB layout, a custom 3D model written in Python, and a full manufacturing file set.

Nikhil-Misal-24/Mini-Power-Inverter-12V-DC-to-240V-AC-
Mini Inverter – 12V DC to 240V AC Designed and developed a compact inverter PCB that converts 12V DC battery input into 240V AC output using oscillator, MOSFET switching, and step-up transformer stages.

anish1732/Mini-Inverter-PCB-Design-KiCAD-
This repository contains the complete KiCad project files, schematics, PCB layout, and fabrication outputs for a mini inverter circuit.

Bala-Kumaran-M/Mini_Inverter_Kicad
Designed a compact DC-to-AC inverter circuit for converting low-voltage DC into AC output, focusing on schematic design, PCB layout, component selection, and practical hardware implementation.


SachinTiwari-VITPuneIC/Mini-Inverter
A compact mini power inverter project featuring a custom-designed PCB. Converts low-voltage DC input to stable AC output. Optimized for a small footprint and high efficiency. Includes schematics, Gerber files, and BOM.

Sophiayeung10/mini-inverter-pcb
Compact Mini Inverter PCB design built in KiCad 10. Includes schematics, 2-layer PCB layout, 3D STEP models, BOM, and manufacturing Gerbers.

It measures 62.5 × 37 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the IR2153PBF and IRLZ24PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Maurya-sys/Mini_inverter_PCB repository on GitHub, at the commit this page was made from: the board is Hardware/inverter.kicad_pcb and its schematic Hardware/inverter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Maurya-sys before reusing the design.