
Mini Inverter
MatthewSchaar/DC-to-AC-push-pull-inverter-PCB
DC-to-AC push-pull inverter, 12 V to 240 V, designed from scratch in KiCad - schematic, PCB layout, a custom 3D model written in Python, and a full manufacturing file set.

This repository contains the complete KiCad project files, schematics, PCB layout, and fabrication outputs for a mini inverter circuit. The design converts DC input into AC output using MOSFET switching and driver ICs, optimized for compact size and efficient performance.
Mini inverter is an open-source printed circuit board by anish1732, from the anish1732/Mini-Inverter-PCB-Design-KiCAD- repository on GitHub, published under the MIT licence. It is a 2-layer board of 59.5 × 29.5 mm with 21 parts on 17 nets, routed with 97 tracks and 11 vias.
It is built around the IR2153PBF and IRLZ24PBF. Its parts include 6 resistors, 4 capacitors, 3 diodes, 2 transistors and 1 IC. It belongs with the power boards of this library.
This repository contains the complete KiCad project files, schematics, PCB layout, and fabrication outputs for a mini inverter circuit.
The design converts DC input into AC output using MOSFET switching and driver ICs, optimized for compact size and efficient performance.
.sch) and PCB layout (.kicad_pcb)This project is released under the MIT License.
You are free to use, modify, and distribute the design, provided proper attribution is given.
Designed by Anish Kumar(https://github.com/anish1732)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R3, R6 |
| 2 | 22R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R5 |
| 2 | IRLZ24 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D3 |
| 1 | 0.01uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 0.2uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 1 | 10k | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | 12V | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | BT1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | IR2153 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Step Down 240V to 12-012V | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | T1 |
The 19 most common of 21 parts.

MatthewSchaar/DC-to-AC-push-pull-inverter-PCB
DC-to-AC push-pull inverter, 12 V to 240 V, designed from scratch in KiCad - schematic, PCB layout, a custom 3D model written in Python, and a full manufacturing file set.

Nikhil-Misal-24/Mini-Power-Inverter-12V-DC-to-240V-AC-
Mini Inverter – 12V DC to 240V AC Designed and developed a compact inverter PCB that converts 12V DC battery input into 240V AC output using oscillator, MOSFET switching, and step-up transformer stages.

Bala-Kumaran-M/Mini_Inverter_Kicad
Designed a compact DC-to-AC inverter circuit for converting low-voltage DC into AC output, focusing on schematic design, PCB layout, component selection, and practical hardware implementation.

Maurya-sys/Mini_inverter_PCB
My first PCB design project in KiCad. Learning PCB design and open to feedback, suggestions, and constructive criticism.


SachinTiwari-VITPuneIC/Mini-Inverter
A compact mini power inverter project featuring a custom-designed PCB. Converts low-voltage DC input to stable AC output. Optimized for a small footprint and high efficiency. Includes schematics, Gerber files, and BOM.

Sophiayeung10/mini-inverter-pcb
Compact Mini Inverter PCB design built in KiCad 10. Includes schematics, 2-layer PCB layout, 3D STEP models, BOM, and manufacturing Gerbers.

It measures 59.5 × 29.5 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the IR2153PBF and IRLZ24PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the anish1732/Mini-Inverter-PCB-Design-KiCAD- repository on GitHub, at the commit this page was made from: the board is mini inverter.kicad_pcb and its schematic mini inverter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).