
Mini Inverter
MatthewSchaar/DC-to-AC-push-pull-inverter-PCB
DC-to-AC push-pull inverter, 12 V to 240 V, designed from scratch in KiCad - schematic, PCB layout, a custom 3D model written in Python, and a full manufacturing file set.

A compact mini power inverter project featuring a custom-designed PCB. Converts low-voltage DC input to stable AC output. Optimized for a small footprint and high efficiency. Includes schematics, Gerber files, and BOM.
Mini Inverter is an open-source printed circuit board by SachinTiwari-VITPuneIC, from the SachinTiwari-VITPuneIC/Mini-Inverter repository on GitHub. It is a 2-layer board of 57.5 × 31 mm with 19 parts on 16 nets, routed with 111 tracks and 2 vias.
It is built around the IR2153PBF and IRLZ24PBF. Its parts include 6 resistors, 4 capacitors, 3 diodes, 2 transistors and 1 IC. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R3, R6 |
| 2 | 22R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R5 |
| 2 | IRLZ24 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | 0.01uf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 0.2uf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 1 | 10K | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | 12V | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | BT1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 22K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 470uf | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 47uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | IR2153 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | LED | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | D3 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | Step Down 240V to 12-0-12V | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | T1 |

MatthewSchaar/DC-to-AC-push-pull-inverter-PCB
DC-to-AC push-pull inverter, 12 V to 240 V, designed from scratch in KiCad - schematic, PCB layout, a custom 3D model written in Python, and a full manufacturing file set.

Nikhil-Misal-24/Mini-Power-Inverter-12V-DC-to-240V-AC-
Mini Inverter – 12V DC to 240V AC Designed and developed a compact inverter PCB that converts 12V DC battery input into 240V AC output using oscillator, MOSFET switching, and step-up transformer stages.

anish1732/Mini-Inverter-PCB-Design-KiCAD-
This repository contains the complete KiCad project files, schematics, PCB layout, and fabrication outputs for a mini inverter circuit.

Bala-Kumaran-M/Mini_Inverter_Kicad
Designed a compact DC-to-AC inverter circuit for converting low-voltage DC into AC output, focusing on schematic design, PCB layout, component selection, and practical hardware implementation.

Maurya-sys/Mini_inverter_PCB
My first PCB design project in KiCad. Learning PCB design and open to feedback, suggestions, and constructive criticism.


Sophiayeung10/mini-inverter-pcb
Compact Mini Inverter PCB design built in KiCad 10. Includes schematics, 2-layer PCB layout, 3D STEP models, BOM, and manufacturing Gerbers.

It measures 57.5 × 31 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the IR2153PBF and IRLZ24PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SachinTiwari-VITPuneIC/Mini-Inverter repository on GitHub, at the commit this page was made from: the board is Mini inverter.kicad_pcb and its schematic Mini inverter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SachinTiwari-VITPuneIC before reusing the design.