
Pinball Matrix board Rev 1.kicad pcb pre route
Phil-CIA/Pinball-Sw-Lamp-Matrix-
This project Build 8 row x 4 row lamp and a 8x 4 switch matrix scanner board For The Captain Fantastic - Home Edition Pinball Machine

This project Build 8 row x 4 row lamp and a 8x 4 switch matrix scanner board For The Captain Fantastic - Home Edition Pinball Machine
Pinball Matrix board Rev 1 routed power is an open-source printed circuit board by Phil-CIA, from the Phil-CIA/Pinball-Sw-Lamp-Matrix- repository on GitHub. It is a 4-layer board of 100 × 100 mm with 154 parts on 125 nets, routed with 829 tracks and 104 vias.
It is built around the 74HC595D, LMV393 and IRLZ24PBF, with the BAT54C,215-CN, B4B-XH-A and H24VL10B among its other parts. Its parts include 70 resistors, 33 capacitors, 10 diodes, 8 ICs and 5 inductors. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.
This folder contains the KiCad project files and production exports for the pinball switch + lamp matrix board.
Pinball Matrix board Rev 1.kicad_sch is the checked-in schematic source for Rev 1.hardware/ also contains routed PCB snapshots, Gerbers, drill files, a BOM CSV, and the zipped production package used for ordering.2026-04-09; treat the ordered files as the frozen reference until hardware bring-up starts.../docs/SCHEMATIC_REVIEW.md for design review context and accepted tradeoffs.../docs/BRINGUP_CHECKLIST.md when the first boards arrive.../docs/NEXT_ITERATION.md and ../docs/PROJECT_STATUS.md.pre route, routed, routed power).| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 220Ω | PCM_JLCPCB:R_0805 | R11, R17, R18, R19, R20, R30, R32, R34, R36, R38, R40, R42, R44, R48, R49, R50 +2 |
| 13 | 10kΩ | PCM_JLCPCB:R_0805 | R13, R14, R15, R16, R25, R26, R27, R29, R53, R54, R55, R56, R57 |
| 12 | 100kΩ | PCM_JLCPCB:R_0805 | R21, R22, R23, R24, R31, R33, R35, R37, R39, R41, R43, R45 |
| 11 | 1nF | PCM_JLCPCB:C_0805 | C7, C8, C9, C10, C26, C27, C28, C29, C30, C31, C32 |
| 11 | TestPoint_Small | 1My_Parts_ Connectors:KEYSTONE_5015 | +5V, 3.3v, GND, GPIO0, GPIO1, GPIO8, GPIO11, GPIO12, GPIO13, SCL, SDA |
| 10 | 100nF | PCM_JLCPCB:C_0805 | C5, C12, C15, C17, C18, C19, C20, C21, C22, C23 |
| 7 | 100Ω | PCM_JLCPCB:R_0805 | R64, R65, R66, R67, R68, R69, R70 |
| 7 | FerriteBead | PCM_JLCPCB:L_1206 | FB1, FB2, FB3, FB4, FB5, FB6, FB7 |
| 6 | 15kΩ | PCM_JLCPCB:R_0805 | R46, R47, R58, R60, R61, R63 |
| 6 | 4.7kΩ | PCM_JLCPCB:R_0805 | R1, R2, R3, R4, R5, R6 |
| 5 | 1uF | PCM_JLCPCB:C_0805 | C11, C13, C14, C24, C25 |
| 5 | 47uF | PCM_JLCPCB:C_1206 | C1, C2, C3, C4, C6 |
| 5 | IRLZ24 | Package_TO_SOT_SMD:TO-252-2 | L1, L2, L3, L4, L5 |
| 4 | 47kΩ | PCM_JLCPCB:R_0805 | R7, R8, R9, R10 |
| 4 | BAT54C,215 | PCM_JLCPCB:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | D5, D6, D7, D8 |
| 3 | MountingHole | MountingHole:MountingHole_3.5mm_Pad | H1, H2, H3 |
| 2 | 1kΩ | PCM_JLCPCB:R_0805 | R59, R62 |
| 2 | 74HC595D | PCM_JLCPCB:SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL | U4, U5 |
| 2 | B4B-XH-A | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1, J2 |
| 2 | Green | PCM_JLCPCB:D_0805 | D3, D9 |
| 2 | LMV393 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1, U2 |
| 2 | VNQ7E100AJTR | 1My_Parts_ ICs:SOP50P600X148-17N | U6, U7 |
| 1 | 100uF | PCM_JLCPCB:C_1206 | C34 |
| 1 | 330uf | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C16 |
| 1 | 330Ω | PCM_JLCPCB:R_0805 | R12 |
| 1 | 3kΩ | PCM_JLCPCB:R_0805 | R28 |
| 1 | Conn_01x10_Pin | Connector_Molex:Molex_KK-396_A-41791-0010_1x10_P3.96mm_Vertical | J4 |
| 1 | Conn_01x13_Pin | Connector_Molex:Molex_KK-396_A-41791-0013_1x13_P3.96mm_Vertical | J3 |
| 1 | ESP32-C6-DevKitM-Amazon | 1My_Parts_ MPUs:ESP32-C6-DevKit-Amazon | U3 |
| 1 | H24VL10B | PCM_JLCPCB:D_DFN1006-2L | D1 |
| 1 | H3V3LD5B | PCM_JLCPCB:D_SOD-523 | D2 |
| 1 | H5VND5B | PCM_JLCPCB:D_SOD-523 | D10 |
| 1 | Polyfuse | OptoDevice:R_LDR_7x6mm_P5.1mm_Vertical | F1 |
| 1 | Polyfuse | PCM_JLCPCB:L_1206 | F2 |
| 1 | TestPoint | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP10 |
| 1 | Yellow | PCM_JLCPCB:D_0805 | D4 |
| 1 | ~ | 1My_Parts_ ICs:0.96 inOLED display SSD1306 | U8 |

Phil-CIA/Pinball-Sw-Lamp-Matrix-
This project Build 8 row x 4 row lamp and a 8x 4 switch matrix scanner board For The Captain Fantastic - Home Edition Pinball Machine


Phil-CIA/Captain-Fantastic-Control-and-Hat-Board
Focused hardware repo for the Captain Fantastic Home Edition base control board and its companion HAT board.

jackw01/pi-tin
Open source raspberry pi handheld retro gaming console

SophBG/pi-tin-mod
Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…

Aryan-Kodan/Two_Channel_DSO
A custom Multi-Channel Digital Storage Oscilloscope (DSO) designed using the STM32F103C8T6 microcontroller. This project combines a custom analog front-end, trigger circuitry, anti-alias filtering, multi-channel…


ginomcfino/smart-fan-controller
Dual-fan controller with temperature sensing, tachometer monitoring, overtemperature alarm, and manual override. Designed in KiCad.

It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
154 parts, built around the 74HC595D, LMV393, IRLZ24PBF and BAT54C,215-CN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Phil-CIA/Pinball-Sw-Lamp-Matrix- repository on GitHub, at the commit this page was made from: the board is hardware/Pinball Matrix board Rev 1_routed power.kicad_pcb and its schematic Pinball Matrix board Rev 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Phil-CIA before reusing the design.