
Meteor Sidekick kailh choco
RadioAndrea/Meteor-Sidekick
Slide out keyboard for modern smartphones

Slide out keyboard for modern smartphones
Meteor Sidekick Rev B is an open-source printed circuit board by RadioAndrea, from the RadioAndrea/Meteor-Sidekick repository on GitHub, published under the MIT licence. It is a 2-layer board of 163 × 77 mm with 130 parts on 326 nets, routed with 640 tracks and 46 vias.
It is built around the B3U-3000P. Its parts include 64 diodes, 61 switches, 1 resistor and 1 IC. It belongs with the nRF52 and nRF5x boards of this library.
Slide out keyboard for modern smartphones
Uses Nice!Nano as a microcontroller and the first implementation is sized to a Pixel 7 Pro
Current implementation is with the Kailh Scissor switches as they are very thin and available unlike the ultramecs 6c switches.
If you know of a way to get thinner mechanical switches, like the Ultramecs, at a reasonable price (not $150 a board), please raise an issue in this repo.
Boards that were created were milled with the wrong size of drill bit due to board fab error. Fabricator remade boards to rectify this.
New boards arrived and components are still being collected.
Solder paste stencil arrived and reflow oven was obtained. Soldering of transistors will happen by paste and reflow, while switches will be done entirely by hand.
Board has been produced and now soldered thanks to my steady handed assistant.






| Qty | Value | Footprint | References |
|---|---|---|---|
| 61 | D | Diode_SMD:D_0805_2012Metric | D0, D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +45 |
| 60 | KEYSW_10 | KiCad:6CJ1N0PR | K1, K2, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 +44 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | LED1, LED2, LED3 |
| 2 | Conn_01x01 | Connector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm | Batt_neg, Batt_pos |
| 1 | B3U-3000P | b3u sideswitch:B3U-1000P | S0 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R0 |
| 1 | SW_Reset | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | SW_Reset |
| 1 | nice_nano_v2 | nice-nano-kicad:nice_nano_v2 | U1 |

RadioAndrea/Meteor-Sidekick
Slide out keyboard for modern smartphones

RadioAndrea/Meteor-Sidekick
Slide out keyboard for modern smartphones

RadioAndrea/Meteor-Sidekick
Slide out keyboard for modern smartphones


piecol/CM5_MINIMA_REV1
CM5 LoRaWAN carrier board in a compact, feature-filled footprint

atomic14/esp32-tv-hardware
This is Work In Progress - I'm still working on this.

atomic14/esp32-crystal-balls
This PCB is now supporting two of my projects: Crystal Balls and my Flame Lamp.

plinkysynth/buddies_public
open source release for bib, blueberry and buzzrito 1U eurorack modules by plinky synth and crey emporium


david0ha/astra-cm5-nano
KiCad files and specifications for a 55 × 40 mm CM5 carrier board.

It measures 163 × 77 mm and has 2 copper layers, 1.6 mm thick.
130 parts, built around the B3U-3000P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RadioAndrea/Meteor-Sidekick repository on GitHub, at the commit this page was made from: the board is ultramec-6/Meteor Sidekick Rev B.kicad_pcb and its schematic kailh/choco/Meteor Sidekick kailh choco.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).