

Sterownik
Płytki PCB dla moich projektów.
- Size
- 85.9 × 76.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 38
- Pads
- 110
- Tracks, vias
- 157, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Nov 2021
- Updated
- 28 Nov 2021
Overview
Sterownik is an open-source printed circuit board by Przemas91M, from the Przemas91M/PCB-Projects repository on GitHub. It is a 2-layer board of 85.9 × 76.7 mm with 31 parts on 38 nets, routed with 157 tracks and 9 vias.
It is built around the ATMEGA328P-AU and HLK-PM01. Its parts include 8 connectors, 4 capacitors, 4 resistors, 3 switches and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
README
Kurs/BreadBoardPowerSupply/README.mdBreadboard Power Supply
Projekt zasilacza płytek prototypowych. Wykonano na zajęciach online kursu projektowania płytek PCB.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm_M3_DIN965 | MountingHole:MountingHole_3.2mm_M3_DIN965 | M1, M2, M3, M4 |
| 3 | 4,7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_KathodeUp | D1, D2 |
| 2 | BC182 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1A | Footy:FuseHolder PTF-78 | F1 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | Crystal | Footy:Crystal_16MHz_SMD | Y1 |
| 1 | Enkoder obrotowy | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Wyświetlacz LCD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Zasilanie 230VAC | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J1 |
| 1 | Załączenie pompy | Relay_THT:Relay_SPST_Finder_32.21-x300 | K1 |
| 1 | Załączenie sygnalizatora alarmu | Relay_THT:Relay_SPST_Finder_32.21-x300 | K2 |
| 1 | Złącze DS18B20 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | Złącze brzęczyka | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | Złącze kasowania alarmu | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Złącze pompy | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J4 |
More from Przemas91M/PCB-Projects
3- 2 layers30 × 52 mm

- 2 layers41 × 73 mm

- 2 layers29.5 × 21.3 mm

Similar boards
- 2 layers80 × 63.3 mm

- 2 layers69.1 × 65.5 mm

- 2 layers121 × 68 mm

Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers129.9 × 63.6 mm

Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36 - 2 layers111.8 × 57.2 mm

- 2 layers89.8 × 72.1 mm

HestiaPiOneUniversal
HestiaPi/hestia-touch-pcb-dev
Testing release for the PCB files for HestiaPi Touch
18 parts11GPL-3.0 - 2 layers93 × 61 mm

Zero crossing detector
cs2dsb/zcssr
A PCB and software for a SSR controller that monitors mains AC zero crossings to determine when to turn the SSR on.
98 parts10Apache-2.0 - 2 layers99.1 × 58.4 mm

HEAT
milar111/HEAT
An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.
57 parts9
Questions
How big is the Sterownik PCB?
It measures 85.9 × 76.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sterownik use?
31 parts, built around the ATMEGA328P-AU and HLK-PM01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sterownik KiCad files?
From the Przemas91M/PCB-Projects repository on GitHub, at the commit this page was made from: the board is Sterownik_Pieca/Sterownik.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sterownik design in my own project?
Its repository states no licence, so its author keeps all rights: ask Przemas91M before reusing the design.