2 layers87 × 62.2 mm
HestiaPi KiCAD
HestiaPi/hestia-touch-pcb-dev
Testing release for the PCB files for HestiaPi Touch
13 parts11GPL-3.0
2 layers89.8 × 72.1 mm
HestiaPiOneUniversal
HestiaPi/hestia-touch-pcb-dev11Testing release for the PCB files for HestiaPi Touch
- Size
- 89.8 × 72.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 53
- Pads
- 113
- Tracks, vias
- 168, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Feb 2017
- Updated
- 28 Apr 2026
Overview
HestiaPiOneUniversal is an open-source printed circuit board by HestiaPi, from the HestiaPi/hestia-touch-pcb-dev repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 89.8 × 72.1 mm with 18 parts on 53 nets, routed with 168 tracks and 21 vias.
It is built around the HLK-PM01 and PB400EEQX. Its parts include 6 connectors and 1 switch.
Main components
2
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power ModulesPB400EEQX
Through holeThrough hole Keylock Switches ROHSE-SwitchKeylock Switches
README
README.mdHestiaPi Touch
HestiaPi Touch is a completely open source smart thermostat for your home. With it, you can monitor your home’s temperature, relative humidity, and atmospheric pressure. You can also control your heating, ventilation, air conditioning, hot water, and more from anywhere you have an Internet connection.
You can do all this securely and with confidence your private data stays private.
HestiaPi Touch is compatible with many devices and home automation systems and can serve as a central point of control that ties them all together in your home.
For HestiaPi Touch ONE select the "ONE" folder above.
Useful links
- Main website
- Documentation & Getting Started Guides
- Community forum
- Code
- Electronics (this repo)
- 3D Case
Support us
HestiaPi is and will always be open source and open hardware.
Please consider supporting us through our crowdfunding campaign.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | RL | Library:Panasonic_AQ-G_relay | RL1, RL2, RL3, RL4, RL5 |
| 4 | wire | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4, J5, J6, J7 |
| 1 | BME280_pins | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | BME280 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PSU-EU_100-240V_AC1 |
| 1 | LCD_pins | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J3 |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | symbols:HestiaPi_logo | G*** |
| 1 | PB400EEQX | Library:PB400_series | SW1 |
| 1 | RPi_GPIO | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | J0 |
| 1 | Screw_Terminal_01x07 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-7-5.0-H_1x07_P5.00mm_Horizontal | TerminalBlock1 |
The 17 most common of 18 parts.
More from HestiaPi/hestia-touch-pcb-dev
1Similar boards
- 4 layers140 × 90 mm
TPA3255PBTL
EliMattingly22/TPA3255_ClassD_PBTL
A KiCAD project for the TPA3255 amplifier in PBTL mode
140 parts15MIT - 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers129.9 × 63.6 mm
Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36 - 2 layers111.8 × 57.2 mm
- 2 layers93 × 61 mm
Zero crossing detector
cs2dsb/zcssr
A PCB and software for a SSR controller that monitors mains AC zero crossings to determine when to turn the SSR on.
98 parts10Apache-2.0 - 2 layers99.1 × 58.4 mm
HEAT
milar111/HEAT
An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.
57 parts9 - 2 layers75 × 75 mm
HotPlateController
stasiselectronics/HotPlateController
A simple ESP32 connected controller for a SMD reflow hot plate
47 parts9 - 2 layers70 × 70 mm
AirSensor display
MarcFinns/AirSensor-for-HomeAssistant
AirSensor for HomeAssistant (hardware and software)
30 parts8
Questions
How big is the HestiaPiOneUniversal PCB?
It measures 89.8 × 72.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HestiaPiOneUniversal use?
18 parts, built around the HLK-PM01 and PB400EEQX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HestiaPiOneUniversal KiCad files?
From the HestiaPi/hestia-touch-pcb-dev repository on GitHub, at the commit this page was made from: the board is HestiaPi-ONE/KiCAD/HestiaPiOneUniversal.kicad_pcb and its schematic HestiaPi-ONE/KiCAD/HestiaPiOneUniversal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HestiaPiOneUniversal design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).