

StarBoard
its my own Open source rp2040 devboard made with hackclub. its my first devboard project what i finnaly end
- Size
- 23.5 × 52.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 53
- Pads
- 194
- Tracks, vias
- 502, 46
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 May 2026
- Updated
- 7 Jul 2026
Overview
StarBoard is an open-source printed circuit board by PriX-Y, from the PriX-Y/StarBoard---RP2040 repository on GitHub. It is a 2-layer board of 23.5 × 52.3 mm with 42 parts on 53 nets, routed with 502 tracks and 46 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 17 capacitors, 7 resistors, 4 connectors, 3 ICs and 1 switch. It belongs with the RP2040 boards of this library.
Main components
2RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
README
README.mdStarBoard---RP2040
its my own Open source rp2040 devboard made with hackclub. its my first devboard project what i finnaly end
Program what i use:
- Kicad -
Datasheet what i use:
https://www.nextpcb.com/blog/compare-rp2040-rp2350
and little from tutorial:
https://stasis.hackclub.com/starter-projects/devboard
suggestion
if you wanna buy this you need use my cpl and bom version not becuse you need it but becuse i spend like 1 hours to seearch for the part id on jscs to get it on jlpcb so i to suggest use jlpcb
cost
becuse i made in 2 layer is maybe cheap. but let know if you go only pcb and self soldring this can be +- 40$ with parts i didt have hot air and hot plate so i go pcba way
there is full cost for me with delivery cost and duty for me to poland
there is cart
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | PCM_SparkFun-Capacitor:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C11, C12 |
| 9 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 2 | 1.0uF | PCM_SparkFun-Capacitor:C_0402_1005Metric | C9, C10 |
| 2 | 10pF | PCM_SparkFun-Capacitor:C_0603_1608Metric | C15, C16 |
| 2 | 10uF_0603_10V | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 2 | 27.4 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J1, J2 |
| 1 | 100nF_0603_16V | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 24mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Push_Button | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
Similar boards
- 2 layers42 × 67 mm

- 2 layers181 × 97 mm

OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm

- 4 layers102.9 × 96.7 mm

PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm

Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm

Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm

- 2 layers44 × 44 mm

Questions
How big is the StarBoard PCB?
It measures 23.5 × 52.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the StarBoard use?
42 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the StarBoard KiCad files?
From the PriX-Y/StarBoard---RP2040 repository on GitHub, at the commit this page was made from: the board is StarBoard/StarBoard.kicad_pcb and its schematic StarBoard/StarBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the StarBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask PriX-Y before reusing the design.