2 layers105 × 90 mm
2 layers78 × 67 mm
Solenoid board
PinballWizards/pcb_solenoid_boardKiCAD PCB files for Solenoid Node Board
- Size
- 78 × 67 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 63
- Pads
- 169
- Tracks, vias
- 306, 23
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Nov 2019
- Updated
- 11 Apr 2020
Overview
Solenoid board is an open-source printed circuit board by PinballWizards, from the PinballWizards/pcb_solenoid_board repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 78 × 67 mm with 44 parts on 63 nets, routed with 306 tracks and 23 vias.
It is built around the SN65HVD72DRBR, PHP79NQ08LT and 74HC165D, with the CDSOT23-SM712 among its other parts. Its parts include 14 resistors, 3 capacitors and 2 connectors.
Main components
4
SN65HVD72DRBR
SON-8(3x3)-40℃~+125℃ 1 1 213 250Kbps 3V~3.6V 950uA Half-Duplex Transceiver ±8kV SON-8(3x3) RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICs
PHP79NQ08LT
TO-220AB1 N-channel 1.5V 140pF 14mΩ@10V 157W 3.026nF 301pF 30nC 75V N-Channel ±15V TO-220AB MOSFETs ROHSNexperiaMOSFETs
74HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift Registers
CDSOT23-SM712
SOT-23-55℃~+125℃ 13.3V 150W 15V、25V 500nA 75pF 7A 7V、12V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)
README
README.mdpcb_solenoid_board
KiCAD PCB files for Solenoid Node Board
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R100, R101, R102, R103, R104, R105 |
| 6 | 3k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R3k0, R3k1, R3k2, R3k3, R3k4, R3k5 |
| 6 | PHP79NQ08LT | NXP:PHP79NQ08LT,127 | FET0, FET1, FET2, FET3, FET4, FET5 |
| 4 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | +3V3_OUT1, INP0_INP2, INP3_INP5, Solenoid_IN1 |
| 3 | 0.1 nF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C0.1nF0, C0.1nF1, C0.1nF2 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | +5VIN1, COMMS0, COMMS1 |
| 2 | 10 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R10, R11 |
| 2 | 74HC165 | SN74HC165DR:SN74HC165DR | 8b0, 8b1 |
| 2 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | +48V_GND1, COMM_GND1 |
| 1 | CDSOT23-SM712 | CDSOT23-SM712:CDSOT23-SM712 | Prt_IC1 |
| 1 | CP | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | CP0 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | +48V1 |
| 1 | MCU_LEFT_LEGS | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | MCU_RIGHT_LEGS | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J3 |
| 1 | SN65HVD72DR | sn65hvd72:SN65HVD72DR | RS-485 |
The 40 most common of 44 parts.
Similar boards
- 2 layers30 × 60 mm
SplitFlapDriverATtiny1616V4
adamgmakes/SplitFlapDisplay
A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.
25 parts190 - 4 layers117 × 107 mm
- 8 layers136.9 × 155.9 mm
- 4 layers122 × 87 mm
- 4 layers78.9 × 74.9 mm
- 4 layers150 × 80 mm
Mek output expander
mekatrol/electronics
This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects.
132 parts - 6 layers69.7 × 76.7 mm
Amulet controller
EPFLXplore/XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project
414 parts348Apache-2.0
Questions
How big is the Solenoid board PCB?
It measures 78 × 67 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solenoid board use?
44 parts, built around the SN65HVD72DRBR, PHP79NQ08LT, 74HC165D and CDSOT23-SM712. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solenoid board KiCad files?
From the PinballWizards/pcb_solenoid_board repository on GitHub, at the commit this page was made from: the board is solenoid_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solenoid board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).