Skip to the content
2 layers42 × 42 mmRP2040 minimal r2, the printed circuit board in 3D

RP2040 minimal r2

PietPtr/picotide

A minimal testbed for a RP2040-based board with an Si5351 as a clock source instead of the usual 12MHz crystal.

Size
42 × 42 mm
Copper layers
2
Thickness
1 mm
Parts
46
Nets
56
Pads
203
Tracks, vias
488, 74
Pours
6
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
5 Dec 2024
Updated
24 Apr 2025

Overview

RP2040 minimal r2 is an open-source printed circuit board by PietPtr, from the PietPtr/picotide repository on GitHub. It is a 2-layer board of 42 × 42 mm with 46 parts on 56 nets, routed with 488 tracks and 74 vias.

It is built around the RP2040, W25Q128JVSIQ and SI5351A-B-GT. Its parts include 17 capacitors, 5 resistors, 5 connectors, 4 ICs and 1 diode. It belongs with the RP2040 boards of this library.

Main components

3

README

pcbs/minsync/README.md

minsync

A minimal testbed for a RP2040-based board with an Si5351 as a clock source instead of the usual 12MHz crystal.

IO:

  • Four clusters of six GPIO pins and 5V + GND power pins to allow easy chaining of the board.
  • Headers for SWD flashing
  • A bootsel button
  • Testpoint for a gpout pin for debugging internal clocks

Components

Si5351A (0.77): https://jlcpcb.com/partdetail/skyworks_siliconLabs-SI5351A_BGTR/C504891 25 MHz crystal (0.25): https://jlcpcb.com/partdetail/Ndk-NX3225GA_25_000M_STD_CRG2/C1985619 RP2040 (0.95): https://jlcpcb.com/partdetail/RaspberryPi-RP2040/C2040 Voltage regulator (0.51): https://jlcpcb.com/partdetail/Onsemi-NCP1117DT33G/C154606 quad SPI flash (0.51): https://jlcpcb.com/partdetail/WinbondElec-W25Q128JVSIQ/C97521 Button for reset (0.57): https://jlcpcb.com/partdetail/ck-KMR221GLFS/C72443 Male headers x4 (0.60): https://jlcpcb.com/partdetail/225573-A2005WV2x5P/C225290

Parts

46
QtyValueFootprintReferences
10100nCapacitor_SMD:C_0402_1005MetricC5, C6, C7, C9, C11, C12, C13, C14, C15, C16
4BM23FR0.6-6DS-0.35V_51_Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_VerticalPTP1, PTP2, PTP3, PTP4
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5H1, H2, H3, H4
310uCapacitor_SMD:C_0805_2012MetricC1, C4, C17
20.47uFCapacitor_SMD:C_0603_1608MetricC2, C3
21kResistor_SMD:R_0402_1005MetricR1, R3
21uCapacitor_SMD:C_0402_1005MetricC8, C10
22.2kResistor_SMD:R_0402_1005MetricR4, R5
2TestPointConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP1, TP2
110kResistor_SMD:R_0402_1005MetricR2
1Conn_01x01_PinConnector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_VerticalJ6
1Crystal_GND24Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY2
1GPIN_to_LEDJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP2
1GPIN_to_SiJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1LEDLED_SMD:LED_0603_1608MetricD1
1NCP1117-3.3_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1POWERConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1RP2040RP2040_minimal:RP2040-QFN-56U3
1SSD1306Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7
1SWD_HEADERSConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5
1SWD_JSTConnector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_VerticalJ1
1SW_PushRP2040_minimal:TS-1187A-PushButtonSW1
1Si5351A-B-GTPackage_SO:MSOP-10_3x3mm_P0.5mmU4
1W25Q128JVSPackage_SO:SOIC-8_5.23x5.23mm_P1.27mmU2

More from PietPtr/picotide

2
  • 2 layers50 × 63 mmMultiprobe, the printed circuit board in 3D

    Multiprobe

    PietPtr/picotide

    A minimal testbed for a RP2040-based board with an Si5351 as a clock source instead of the usual 12MHz crystal.

    26 parts
  • 2 layers17.4 × 14 mmMinsync connect, the printed circuit board in 3D

    Minsync connect

    PietPtr/picotide

    A minimal testbed for a RP2040-based board with an Si5351 as a clock source instead of the usual 12MHz crystal.

    2 parts

Similar boards

  • 4 layers40 × 58.5 mmPicoFox PCB, the printed circuit board in 3D

    PicoFox PCB

    ai6ym/PicoFox

    The open source fox transmitter.

    143 parts16
  • 4 layers54.3 × 76.1 mmPhase interferometer, the printed circuit board in 3D

    Phase interferometer

    mpkendall/phase-interferometer

    A 2(or more)-element phase interferometric direction finder for 433 MHz using a passive phased array

    78 parts3
  • 4 layers42.2 × 49.8 mmJetboard, the printed circuit board in 3D

    Jetboard

    uge/jetboard

    KiCad and related artifacts for a WSPR tracker based on Traquito/Jetpack

    84 parts1
  • 2 layers42 × 67 mmLalboard, the printed circuit board in 3D

    Lalboard

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    65 parts993
  • 2 layers181 × 97 mmOpenDeck r3.1.2, the printed circuit board in 3D

    OpenDeck r3.1.2

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    262 parts960Apache-2.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 4 layers102.9 × 96.7 mmPicoGUS chipdown, the printed circuit board in 3D

    PicoGUS chipdown

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    99 parts805
  • 4 layers180.8 × 300.3 mmDilemma, the printed circuit board in 3D

    Dilemma

    Bastardkb/Dilemma

    The Dilemma is a vertical stagger low-profile keyboard with mods.

    383 parts590

Questions

How big is the RP2040 minimal r2 PCB?

It measures 42 × 42 mm and has 2 copper layers, 1 mm thick.

What parts does the RP2040 minimal r2 use?

46 parts, built around the RP2040, W25Q128JVSIQ and SI5351A-B-GT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RP2040 minimal r2 KiCad files?

From the PietPtr/picotide repository on GitHub, at the commit this page was made from: the board is pcbs/minsync/RP2040_minimal_r2.kicad_pcb and its schematic pcbs/minsync/RP2040_minimal_r2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RP2040 minimal r2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask PietPtr before reusing the design.