
AS3397 proto DIP
PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer

Open source, analog and polyphonic synthesizer
Basic synth is an open-source printed circuit board by PhysicsDptAngers, from the PhysicsDptAngers/polyUAnalog repository on GitHub, published under the MIT licence. It is a 2-layer board of 77.2 × 76.1 mm with 14 parts on 61 nets, routed with 386 tracks and 64 vias.
It is built around the BS170FTA. Its parts include 10 connectors, 1 IC, 1 transistor and 1 switch. It belongs with the audio and music boards and the RP2040 boards of this library.
The simplest version to assemble and arguably the best starting point. This is a standalone analog voice module that does not require a conductor board to generate sound. Additionaly, the board is large and use trhough-hole component (except for the as3397 chip). It also includes a dedicated MIDI input socket and power circuitry, allowing you to simply connect a MIDI cable and a +12V power supply to get a fully functional monophonic analog synthesizer!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_Env | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5_Env1, J6_LFO1, J7_DSO1, J8_POLY1 |
| 1 | BS170F | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x04_Socket | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | J3 |
| 1 | Conn_Filter | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3_Filter1 |
| 1 | Conn_VCA | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J4_VCA1 |
| 1 | Conn_VCO_A | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1_VCO_A1 |
| 1 | Conn_VCO_B | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2_VCO_B1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 1 | SSD1306 | SSD1306:128x64OLED | Brd1 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |

PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer


PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer

PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer


PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer

PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer


tdouez/TeleinfoMySensors
Interface Téléinfo pour compteur Linky avec MySensors


RepRapLtd/AnalogueNeuralNet
Project to make a photonic neural network using photochromic material for the synaptic weighting adjustments

Cosys-Lab/lab-scale-gantry-crane
Repository containing the files to create the lab-scale gantry crane used in a couple of publications.


tdouez/Linky_TEMPO
Module de récupération des sorties relais pour le compteur Linky avec un contrat TEMPO Compatible en TIC historique et standard


hprd/z80-fpga-drop-in-replacement
UT Austin Fall 2025-Spring 2026 Senior Design Project for developing a Zilog Z80 CPU drop-in replacement using an FPGA.
It measures 77.2 × 76.1 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the BS170FTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PhysicsDptAngers/polyUAnalog repository on GitHub, at the commit this page was made from: the board is hardware/controller/basic synth/Main_board/Main_board.kicad_pcb and its schematic hardware/Bus/carte_BUS_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).