
AlimTeleinfoMySensors
tdouez/TeleinfoMySensors
Interface Téléinfo pour compteur Linky avec MySensors

Module de récupération des sorties relais pour le compteur Linky avec un contrat TEMPO Compatible en TIC historique et standard
Linky TEMPO is an open-source printed circuit board by tdouez, from the tdouez/Linky_TEMPO repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 62.7 × 87.8 mm with 34 parts on 52 nets, routed with 232 tracks and 8 vias.
It is built around the LTV-814, LL4148 and BS170FTA. Its parts include 11 resistors, 8 diodes, 4 connectors, 3 transistors and 3 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
//-------------------------------------------------------------------- // | / _ ) | // | | | ` \ -) -) _ \ | -) | | -) // | _,| ||_| _| _| / _| _| _,| _| //--------------------------------------------------------------------
Module de récupération des sorties relais pour le compteur Linky avec un contrat TEMPO Compatible en TIC historique et standard
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 2,2k | Resistor_SMD:R_1206_3216Metric | R3, R4, R5, R6, R11 |
| 4 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm | J1_EAU1, J2_CHAUF1, J3, J4 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric | R8, R9, R10 |
| 2 | Fuse 1A | Fuseholder 696310001002:696310001002 | F1, F2 |
| 2 | LL4148 | Diode_SMD:D_MiniMELF | D6, D7 |
| 2 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2 |
| 2 | TRANS_NPN-MMBT2222AL | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | LED BLEU | LED_THT:LED_D3.0mm_FlatTop | D3 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 2,2 | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | 3.3k | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | BS170F | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | LED BLANC | LED_THT:LED_D3.0mm_FlatTop | D4 |
| 1 | LED CHAUF | LED_THT:LED_D3.0mm_FlatTop | D2 |
| 1 | LED EAU | LED_THT:LED_D3.0mm_FlatTop | D1 |
| 1 | LED ROUGE | LED_THT:LED_D3.0mm_FlatTop | D5 |
| 1 | LED TIC | LED_THT:LED_D3.0mm_FlatTop | D8 |
| 1 | LOGO | logo_fb:logo_fb_small | G*** |
| 1 | LTV-814 | Package_DIP:DIP-4_W7.62mm | U1 |
| 1 | SW_DIP_x05 | Button_Switch_THT:SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mm | SW1 |

tdouez/TeleinfoMySensors
Interface Téléinfo pour compteur Linky avec MySensors

Miceuz/triac-bloc
An universal power block based on triac. In essence this is a solid state relay with some bells and whistles

MayaPosch/DebounceHat
Fully isolated, input debounce Hat for Raspberry Pi, for up to 6 switches, relays and powered devices

Domochip/WTeleInfo
Un D1 Mini et quelques composants pour envoyer votre Téléinfo (Compteur EDF) sur votre Domotique

synfinatic/GoProControl
GoPro WiFi controller board using an ESP8266 allowing easy integration with other circuits

markus-k/led-controller-hardware
KiCAD schematics and design files for my LED controller.


Ahmed-Atef-Tech/Isolated-4CH-AC-Controller
ISO-AC4-FB: 4-Channel isolated AC controller (220V/8A) designed in KiCad. Features SSRs, active AC feedback, 2oz copper, and strict safety isolation.
It measures 62.7 × 87.8 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the LTV-814, LL4148 and BS170FTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tdouez/Linky_TEMPO repository on GitHub, at the commit this page was made from: the board is kicad/Linky_TEMPO.kicad_pcb and its schematic kicad/Linky_TEMPO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).