

ISO AC4-FB Controller
ISO-AC4-FB: 4-Channel isolated AC controller (220V/8A) designed in KiCad. Features SSRs, active AC feedback, 2oz copper, and strict safety isolation.
- Size
- 89.9 × 59.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 35
- Pads
- 118
- Tracks, vias
- 255, 5
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Apr 2026
- Updated
- 3 Jul 2026
Overview
ISO AC4-FB Controller is an open-source printed circuit board by Ahmed-Atef-Tech, from the Ahmed-Atef-Tech/Isolated-4CH-AC-Controller repository on GitHub. It is a 2-layer board of 89.9 × 59.9 mm with 50 parts on 35 nets, routed with 255 tracks and 5 vias.
It is built around the LTV-814 and G3MB-202PL. Its parts include 18 resistors, 6 diodes, 4 capacitors, 4 ICs and 4 switches.
Main components
2LTV-814
DIP-4-30℃~+100℃ 1 1.2V 100mV@20mA,1mA 20% 200mW 300% 35V 3us 4us 50mA 50mA 5kV AC,DC Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output OptoisolatorsG3MB-202PL
SIP-42A No SIP-4 Solid State Relays (Triac Output) ROHSOmronSolid State Relays (Triac Output)
README
README.mdIsolated-4CH-AC-Controller
ISO-AC4-FB: A 4-Channel isolated AC controller (220V/8A) engineered in KiCad. Designed for high reliability with Solid State Relays (SSRs), active AC feedback, 1oz copper traces, and strict safety isolation routing.
Uncompromising Safety Features
Designing a mixed-signal board that handles 220V AC alongside 5V DC logic demands strict adherence to safety standards. This board incorporates multiple layers of electrical and physical protection to ensure user safety and device longevity:
- Transient Surge Protection (MOV): A 10D431K Varistor is placed in parallel with the main AC input to absorb damaging voltage spikes and transients from the mains supply, protecting the downstream SSRs and loads.
- Individual Channel Overcurrent Protection: Instead of relying on a single main fuse, each of the 4 output channels is individually protected by a dedicated fuse. This ensures that a short circuit or overload on one specific load will safely blow its respective fuse without shutting down the entire system or damaging the SSR.
- Physical Isolation Slots (Creepage Enhancement): To completely eliminate the risk of high-voltage arcing across the PCB surface, 1.0mm milled isolation slots were routed between the high-voltage (AC) and low-voltage (DC) zones. This physically converts the creepage distance into clearance, vastly exceeding standard safety requirements.
- Silkscreen Safety Demarcation: For safe handling and maintenance, the AC high-voltage region is explicitly demarcated on the silkscreen layer with clear boundary lines and "DANGER / HIGH VOLTAGE" warnings. This visual barrier prevents accidental contact by technicians during assembly or testing.
Component Highlight: Why Omron G3MB SSRs?
For the switching mechanism, traditional Electro-Mechanical Relays (EMRs) and discrete TRIAC circuits were intentionally avoided in favor of the Omron G3MB Series Solid State Relays (SSRs). This selection provides several massive engineering advantages:
- Integrated Zero-Cross Circuitry: By utilizing the zero-cross models (e.g., G3MB-202P / PEG), the SSR only switches the load when the AC sine wave crosses 0V. This eliminates destructive arcing, prevents massive inrush currents, and completely removes the need to design a complex external zero-crossing detection circuit.
- Built-in RC Snubber: The relay features an internal snubber circuit that absorbs sudden voltage spikes (dv/dt) typically generated by inductive loads. This provides robust protection without requiring external capacitors and resistors.
- Ultra-Compact Footprint (SIP-4): The vertical Single In-line Package takes up a fraction of the PCB space compared to bulky mechanical relays, which was crucial for fitting 4 fully isolated AC channels on a single compact board.
- Silent Operation & Infinite Lifespan: As a semiconductor device with no moving parts, the SSR operates in absolute silence (a mandatory requirement for smart home automation) and is immune to mechanical wear, contact degradation, or welding, guaranteeing a virtually infinite lifespan.
- Low Drive Current: The internal LED requires extremely low trigger current (~10-20mA at 5V). This allows the SSRs to be driven directly by standard logic-level signals, completely eliminating the need for external BJT driving transistors and flyback diodes.
How the Active AC Feedback Works
Unlike standard relay boards that blindly send a control signal without knowing the actual state of the load, this board actively monitors the AC output to verify that power is successfully reaching the terminal.
The feedback loop operates through a secure, 4-step hardware process:
- Voltage Sampling: When the SSR turns on and 220V AC is present at the output terminal, a minuscule sample current (~2mA) is tapped through high-value current-limiting resistors (e.g., 47kΩ).
- Optical Isolation: This sample current drives the internal bidirectional LEDs of an LTV-814 AC Optocoupler. This guarantees absolute galvanic isolation—transferring the status signal via light while keeping the 220V mains completely separated from the 5V logic side.
- Signal Conditioning: Because the 50Hz AC mains crosses zero 100 times per second, the optocoupler's transistor output inherently pulses. To prevent erratic MCU readings, a 10uF smoothing capacitor paired with a 10kΩ pull-down resistor acts as a low-pass filter, converting the pulsed output into a clean, stable DC logic level.
- MCU Logic Verification:
- State HIGH (5V): The MCU reads a solid HIGH, confirming the load is actively powered.
- State LOW (0V): The MCU reads LOW, instantly indicating that the SSR is off, the channel's fuse has blown, or there is a total mains power failure.
Known Limitations and Proposed Revisions (Rev 2.0)
1. AC Routing Topology & Isolation Constraints
- Current Implementation: Due to strict board size constraints in this initial prototype, the 220V
AC_Nline (used strictly for low-current voltage sensing/feedback) and the 5VVCClogic line were routed using a Daisy-Chain topology. Trace widths were set to 0.5mm, which is electrically sufficient for the minimal control current (~10mA). - Engineering Assessment: While the current capacity is well within safe margins for a 1oz copper board, the daisy-chain approach in the high-voltage section makes it difficult to maintain optimal IPC-2221 clearance distances. Relying solely on soldermask for high-voltage separation is not ideal for long-term industrial reliability.
- Action Plan for Production (Rev 2.0): The next revision will transition the high-voltage routing to a Star Topology directly from the input terminal. Furthermore, isolation milling slots will be implemented between the interconnected AC nodes to strictly enforce standard creepage distances.
2. Wireless Connectivity & IoT Integration
- Action Plan for Rev 2.0: The current prototype relies on an external microcontroller connected via pin headers. In the next revision, the component placement and routing will be heavily optimized to include a dedicated socket for an ESP-01 module (or a fully integrated ESP8266/ESP32 circuit). This will allow the PCB to act as a standalone, plug-and-play IoT shield, enabling seamless Wi-Fi control and smart home integration right out of the box without any external wiring.
3. Mechanical Design & Productization
- Action Plan for Rev 2.0: To bridge the gap between a bare PCB and a consumer-ready device, a custom 3D-printable enclosure will be designed. This will provide a professional aesthetic, ensure secure mounting, and most importantly, guarantee physical isolation and safety from high-voltage AC contacts for the end-user.
4. Schematic Refactoring & Annotation Optimization
- Action Plan for Rev 2.0: The schematic diagram will be completely refactored to enhance readability and logical flow. Component designators will be systematically re-annotated and grouped by functional blocks (e.g., sequentially per channel). This structured approach will significantly simplify troubleshooting, improve the BOM organization, and streamline the overall PCB assembly process.
BOM Corrections (Important)
Please note the following two assembly corrections regarding the current .kicad_sch labels:
- Fuses (F1-F4): The schematic shows 2.5A, but the SSR max limit is 2A. You MUST use 1.5A or 2A Fast-Acting fuses to safely protect the relays from overload.
- SSR Model: The schematic lists
G3MB-202PL(Random-ON). To leverage the Zero-Cross switching and EMI reduction features, you must install theG3MB-202PorG3MB-202PEG(with built-in snubber) variants instead.
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 47kΩ | Resistor_SMD:R_2512_6332Metric | R1, R2, R4, R5, R11, R12, R15, R16 |
| 4 | 10kΩ | Resistor_SMD:R_1206_3216Metric | R7, R8, R14, R17 |
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4 |
| 4 | 1kΩ | Resistor_SMD:R_1206_3216Metric | R3, R6, R13, R18 |
| 4 | FB_LED1 | LED_SMD:LED_1206_3216Metric | D1, D2, D5, D6 |
| 4 | Fuse 2.5A | My_Custom_Parts:FUSE_36911000000 | F1, F2, F3, F4 |
| 4 | G3MB-202PL | My_Custom_Parts:RELAY_G3MB-202P_DC12 | K1, K2, K3, K4 |
| 4 | LTV-814 | Package_DIP:DIP-4_W7.62mm | U1, U2, U3, U4 |
| 2 | 100kΩ | Resistor_SMD:R_1206_3216Metric | R9, R10 |
| 1 | 1N4007 | Diode_SMD:D_SMA | D4 |
| 1 | Conn_01x06 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-6-5.08_1x06_P5.08mm_Horizontal | J2 |
| 1 | LOGO | MyLogos:Basic_Circle_AT_Logo_XLarge | G*** |
| 1 | LOGO | MyLogos:Full_AT_Logo_XLarge | G*** |
| 1 | Microcontroller Connectors | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | PWR_LED | LED_SMD:LED_1206_3216Metric | D3 |
| 1 | Varistor_10D431K | Varistor:RV_Disc_D12mm_W4mm_P7.5mm | RV1 |
The 45 most common of 50 parts.
Similar boards
- 2 layers167.8 × 83 mm

- 2 layers100 × 50 mm

Power board
ikatkov/hot-plate
The heating is not uniform (enough?). The father points of the hotplate are 5C colder than the center, where the ceramic heating element is located.
22 partsGPL-3.0 - 4 layers90 × 90 mm

- 2 layers77 × 77 mm

- 2 layers165 × 85 mm

Sprinkler System
Swamp-Ig/Sprinkler-System
PCB design for five zone sprinkler system. For ESPHome with an Esp32 module.
80 parts - 4 layers267 × 100.5 mm

- 2 layers165.2 × 114.6 mm

Web controlled relay board v2.0
ambadran/Free-Lance-Projects
repo for holding my free lance work
71 parts - 2 layers100 × 100 mm

ProyectoTuristech
iSebass/TourisTech
En el contexto de un mundo cada vez más consciente de la importancia de la sostenibilidad y la conservación del medio ambiente, surge un proyecto visionario que busca revolucionar la industria del ecoturismo en…
31 parts
Questions
How big is the ISO AC4-FB Controller PCB?
It measures 89.9 × 59.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ISO AC4-FB Controller use?
50 parts, built around the LTV-814 and G3MB-202PL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ISO AC4-FB Controller KiCad files?
From the Ahmed-Atef-Tech/Isolated-4CH-AC-Controller repository on GitHub, at the commit this page was made from: the board is ISO-AC4-FB Controller.kicad_pcb and its schematic ISO-AC4-FB Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ISO AC4-FB Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ahmed-Atef-Tech before reusing the design.