

Ultraphotonicsense elec
Board for ToF sensors management
- Size
- 83 × 38 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 80
- Nets
- 65
- Pads
- 288
- Tracks, vias
- 777, 44
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Oct 2018
- Updated
- 17 Oct 2020
Overview
Ultraphotonicsense elec is an open-source printed circuit board by PhenixRobotik, from the PhenixRobotik/ultraphotonicsense-elec repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 83 × 38 mm with 80 parts on 65 nets, routed with 777 tracks and 44 vias.
It is built around the TCAN332D, 74HC164 and LP38693MP-ADJ, with the SN74AHC1G08DBV, TXB0104PW and TXB0108PW among its other parts. Its parts include 21 capacitors, 16 resistors, 15 connectors, 10 ICs and 6 diodes. It belongs with the STM32 boards of this library.
Main components
6TCAN332D
SOIC-8-40℃~+125℃ 1Mbps 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers74HC164
SOP-140℃~+70℃ 1 24ns@5V,16pF 2V~6V 74HC 8 Serial-to-Parallel SOP-14 Shift Registers ROHSGRShift RegistersLP38693MP-ADJ
SOT-223-5-40℃~+125℃@(Tj) 0.7uVrms 1 1.25V~9V 10V 250mV@(500mA) 500mA 55dB@(120Hz) 55uA Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOT-223-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74AHC1G08DBV
SOT-23-5-55℃~+125℃ 1 1.5V~3.85V 1.9V~2V、2.9V~3V、3.8V、4.4V~4.5V 1uA 2 2V~5.5V 440mV 500mV~1.65V 7.9ns@5V,50pF 74AHC Series 8mA 8mA AND Gate SOT-23-5 Logic Gates ROHSTexas InstrumentsLogic GatesTXB0104PW
TSSOP-14-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Auto Direction Detection Bidirectional CMOS CMOS Tri-State TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTXB0108PW
TSSOP-20-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 8 Automatic direction detection、Power-off protection、Output enable high-impedance Bidirectional Level translator Tri-State TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
README
README.mdultraphotonicsense-elec
Board for Time of Flight and ultrasonic sensors management
Parts
80| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C11, C12, C13, C14, C17, C18, C19, C20, C21 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R9, R10, R11, R13, R14, R15 |
| 8 | Conn_01x05 | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J2, J3, J4, J5, J6, J7, J8, J9 |
| 5 | LED_ALT | LED_SMD:LED_0805_2012Metric_Castellated | D2, D3, D4, D5, D6 |
| 4 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J10, J11, J12, J13 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | MH1, MH2, MH3, MH4 |
| 3 | 1µ | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7, C8, C15 |
| 2 | 10µ | Capacitor_SMD:CP_Elec_4x5.4 | C6, C16 |
| 2 | 26p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C9, C10 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R16 |
| 2 | CAN_conn | Connector_JST:JST_XH_B05B-XH-A_1x05_P2.50mm_Vertical | P1, P2 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12 |
| 1 | 280 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 1 | 500 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 6.8k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | 700 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 74HC164 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | 9.1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 1 | Conn_Debug | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J1 |
| 1 | D | Diode_SMD:D_SMA | D1 |
| 1 | Jumper_NC_Dual | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | Jumper_NC_Dual | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | LD1117S50TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | LP38693MP-ADJ | Package_TO_SOT_SMD:SOT-223-5 | U6 |
| 1 | Logo_Open_Hardware_Small | PhenixRobotik:Logo_16,9mm | LOGO1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO2 |
| 1 | Logo_Open_Hardware_Small | Symbol:KiCad-Logo_6mm_SilkScreen | LOGO3 |
| 1 | Polyfusal | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | SN74AHC1G08DBV | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U10 |
| 1 | STM32F303K8Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U7 |
| 1 | SW_SPST | PhenixRobotik:SW_SPST_CK_KSS_3.7x5.5mm | SW1 |
| 1 | TCA9517DR | Package_SO:TSSOP-8_3x3mm_P0.65mm | U9 |
| 1 | TCAN332 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | TXB0104PW | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U8 |
| 1 | TXB0108PW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
More from PhenixRobotik/ultraphotonicsense-elec
2- 2 layers20 × 16 mm

- 2 layers20 × 16 mm

Similar boards
- 4 layers110 × 46 mm

- 4 layers205.5 × 152 mm

- 4 layers101.6 × 162.6 mm

- 4 layers72 × 51.1 mm

Esp32s3-audio streamer
wemaxon/esp32-audio-streamer
Hardware design for a WiFi/Bluetooth audio streamer using the esp32 microcontroller and the PCM5102A DAC, intended to be used with squeezelite firmware.
63 parts - 4 layers100 × 100 mm

DAC ADC PWM IO
DanielMartensson/STM32-PLC
STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, CAN-bus + Alarm etc.
270 parts183MIT - 2 layers136 × 58 mm

- 4 layers135.6 × 54.6 mm

Dragonmanh7
martinribelotta/h7dragonman
STM32H7 board for industrial protocol bridge
147 parts19BSD-2-Clause - 4 layers100 × 100 mm

ETH OPAMP DCMI FSMC CAN ENCODER CS1000
DanielMartensson/STM32-Ethernet-Camera
PCB board with camera and ethernet connection + CAN-bus
144 parts16MIT
Questions
How big is the Ultraphotonicsense elec PCB?
It measures 83 × 38 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ultraphotonicsense elec use?
80 parts, built around the TCAN332D, 74HC164, LP38693MP-ADJ and SN74AHC1G08DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ultraphotonicsense elec KiCad files?
From the PhenixRobotik/ultraphotonicsense-elec repository on GitHub, at the commit this page was made from: the board is ultraphotonicsense-elec.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ultraphotonicsense elec design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).