Skip to the content
4 layers72 × 51.1 mmEsp32s3-audio streamer, the printed circuit board in 3D

Esp32s3-audio streamer

wemaxon/esp32-audio-streamer

Hardware design for a WiFi/Bluetooth audio streamer using the esp32 microcontroller and the PCM5102A DAC, intended to be used with squeezelite firmware.

Size
72 × 51.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
63
Nets
65
Pads
281
Tracks, vias
151, 82
Pours
89
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
11 May 2025
Updated
10 Aug 2026

Overview

Esp32s3-audio streamer is an open-source printed circuit board by wemaxon, from the wemaxon/esp32-audio-streamer repository on GitHub. It is a 4-layer board of 72 × 51.1 mm with 63 parts on 65 nets, routed with 151 tracks and 82 vias.

It is built around the CH340C, ESP32-WROVER-E(4MB) and AMS1117-3.3, with the LP5907MFX-3.3, PCM5102PW and PJ-399B-6A among its other parts. Its parts include 25 capacitors, 12 resistors, 7 ICs, 4 diodes and 4 connectors. It belongs with the audio and music and radio and wireless boards and the ESP32 boards of this library.

Main components

12

README

README.md

esp32-audio-streamer

Hardware Design for a WiFi/Bluetooth Audio Streamer using the ESP32 Microcontroller and the PCM5102A DAC.

This design is intended to be used with the open-source Squeezelite-esp32 firmware.

Parts

63
QtyValueFootprintReferences
11100nCapacitor_SMD:C_0402_1005MetricC2, C4, C5, C7, C11, C12, C13, C15, C16, C17, C23
710uCapacitor_SMD:C_0402_1005MetricC3, C8, C9, C14, C20, C21, C25
50Resistor_SMD:R_0402_1005MetricR6, R7, R8, R9, R10
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5_DIN965_PadH1, H2, H3, H4
31uCapacitor_SMD:C_0402_1005MetricC1, C6, C10
3UAD8C05L01Diode_SMD:D_SOD-882D1, D2, D3
22n2Capacitor_SMD:C_0402_1005MetricC22, C24
22u2Capacitor_SMD:C_0402_1005MetricC18, C19
2470RResistor_SMD:R_0402_1005MetricR11, R12
25k1Resistor_SMD:R_0402_1005MetricR3, R4
2AV-5footprint_library:CONN-TH_AV-5J5, J6
2BSS138Package_TO_SOT_SMD:SOT-23Q1, Q2
2DNPResistor_SMD:R_0402_1005MetricR2, R5
2TS-1002S-05026Cfootprint_library:SW-SMD_4P-L5.2-W5.2-P3.70-LS6.5SW1, SW2
2~TestPoint:TestPoint_Pad_D1.0mmTP3, TP5
1120kResistor_SMD:R_0402_1005MetricR1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1BLM21PG221SN1DInductor_SMD:L_0805_2012MetricFB1
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU5
1Conn_02x20_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ7
1ESP32-WROVER-EEspressif:ESP32-WROVER-EU1
1LP5907MFX-3.3Package_TO_SOT_SMD:SOT-23-5U3
1PCM5102Package_SO:TSSOP-20_4.4x6.5mm_P0.65mmU6
1PJ-399B-6Afootprint_library:AUDIO-TH_PJ-399B-6AU7
1SN74AHC1G08Package_TO_SOT_SMD:SOT-353_SC-70-5U4
1USB_C_Receptacle_USB2.0_16Pfootprint_library:USB_C_Receptacle_DEALON_USB-TYPE-C-018J2
1XL-3030RGBC-WS2812Bfootprint_library:LED_XINGLIGHT_XL-3030RGBCD4

Similar boards

  • 2 layers92.4 × 70 mmLucaudioESP32 V2 1, the printed circuit board in 3D

    LucaudioESP32 V2 1

    lucococo/LucaudioESP32

    ESP32 based board running SqueezeliteESP32 for audio streaming

    104 parts
  • 4 layers81 × 143.2 mmNanoFOC D, the printed circuit board in 3D

    NanoFOC D

    katbinaris/Nano_D_PlusPlus

    Nano_D++ Electronics and Mechanical Design

    278 parts3
  • 4 layers79.5 × 94.4 mmHV ERT sensor, the printed circuit board in 3D

    HV ERT sensor

    richgumy/black_sensor

    A sensor developed using solely a carbon black silicone elastomer composite and the driving electronics.

    127 parts1
  • 4 layers72.6 × 72.6 mmFOC V1 PCB, the printed circuit board in 3D

    FOC V1 PCB

    arthur-wirjo/FOC_v1_project

    A custom-designed, 60V 50A Field Oriented Control (FOC) BLDC motor controller built from scratch. Designed for high-performance robotics, featuring a 4-layer power PCB, isolated USB telemetry, and CAN bus communication.

    95 partsMIT
  • 4 layers60 × 70 mmControl board PCB, the printed circuit board in 3D

    Control board PCB

    arthur-wirjo/reaction-wheel-inverted-pendulum

    A custom-engineered Reaction Wheel Inverted Pendulum designed as a physical testbed for advanced modern control theory.

    77 partsMIT
  • 4 layers101.6 × 70 mmMicroNES pcb v0.1, the printed circuit board in 3D

    MicroNES pcb v0.1

    bchelf/microNES

    A microcontroller based emulator to play original NES games over composite video (and HDMI)

    109 parts1
  • 2 layers86.1 × 66.4 mmStereoPlasmaSpeakersV2, the printed circuit board in 3D

    StereoPlasmaSpeakersV2

    Firestorm108/Plasma-Speakers-V2

    Dual flyback transformers that produce audio through the modulation of high frequency plasma arcs.

    72 parts

Questions

How big is the Esp32s3-audio streamer PCB?

It measures 72 × 51.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Esp32s3-audio streamer use?

63 parts, built around the CH340C, ESP32-WROVER-E(4MB), AMS1117-3.3 and LP5907MFX-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32s3-audio streamer KiCad files?

From the wemaxon/esp32-audio-streamer repository on GitHub, at the commit this page was made from: the board is esp32s3-audio-streamer.kicad_pcb and its schematic esp32s3-audio-streamer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32s3-audio streamer design in my own project?

Its repository states no licence, so its author keeps all rights: ask wemaxon before reusing the design.