Skip to the content
4 layers183.7 × 92.8 mmMetaldetector, the printed circuit board in 3D

Open source pulse induction balance metal detector

Size
183.7 × 92.8 mm
Copper layers
4
Thickness
1.6 mm
Parts
44
Nets
79
Pads
211
Tracks, vias
223, 50
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 Sep 2025
Updated
19 Sep 2025

Overview

Metaldetector is an open-source printed circuit board by Petersdavis, from the Petersdavis/balanced_pulse_induction_metal_detector repository on GitHub. It is a 4-layer board of 183.7 × 92.8 mm with 44 parts on 79 nets, routed with 223 tracks and 50 vias.

It is built around the SC0915, LM386MX-1/NOPB-HXY and CD4066BM96. Its parts include 13 capacitors, 13 resistors, 8 connectors, 6 ICs and 1 diode.

Main components

3

Parts

44
QtyValueFootprintReferences
4100nFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC6, C7, C7, C8
410kResistor_SMD:R_0402_1005MetricR2, R3, R8, R9
4Conn_CoaxialConnector_Coaxial:MMCX_Molex_73415-0961_Horizontal_0.8mm-PCBJ3, J4, J6, J7
310uFCapacitor_SMD:C_0805_2012MetricC2, C3, C9
3389690002389690002:CONN02_389690002_MOLJ2, J5, J8
3470Resistor_SMD:R_0402_1005MetricR4, R7, R7
2220kResistor_SMD:R_0603_1608MetricR10, R11
2330nFCapacitor_SMD:C_0402_1005MetricC4, C5
24.7kResistor_SMD:R_0402_1005MetricR5, R6
2470uFCapacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mmC11, C12
1100Resistor_SMD:R_0402_1005MetricR1
1100nFCapacitor_SMD:C_0402_1005MetricC1
11N58191N5819:DO41-10D1
133nFCapacitor_SMD:C_0402_1005MetricC10
147kResistor_SMD:R_0603_1608MetricR12
1AudioJack2_GroundConnector_Audio:Jack_3.5mm_CUI_SJ2-3593D-SMT_HorizontalJ1
1BatteryBattery:BatteryHolder_MPD_BA9VPC_1xPP3BT1
1CD4066BM96CD4066BM96:SOIC127P600X175-14NU5
1L78L05_SO878L05:VREG_78L05U6
1LCD-016N002LDisplay:LCD-016N002LU3
1LM386MX-1_NOPBLM386MX_1_NOPB:SOIC127P599X175-8NU2
1R_PotentiometerPotentiometer_SMD:Potentiometer_Bourns_3214G_HorizontalRV1
1SC0915SC0915:MODULE_SC0915U1
1SW_SPSTButton_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010SW1
1TL064TL064CN:DIP794W45P254L1969H508Q14U4

Similar boards

  • 2 layers97.4 × 72.1 mmT25 445PCB, the printed circuit board in 3D

    T25 445PCB

    RitvikPatnala/auto-guitar-tuner

    Handheld auto guitar tuner: custom ESP32-S3 PCB with autocorrelation pitch detection and servo-driven peg tuning

    74 partsMIT
  • 4 layers255 × 127 mmSCART switcher, the printed circuit board in 3D

    SCART switcher

    nunosousa/SCART-switcher

    An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.

    613 parts
  • 2 layers365 × 220 mmPss, the printed circuit board in 3D

    Pss

    pascalguttmann/obat-powersupplysink

    Obat KiCAD Project for PowerSupply Sink

    621 partsMIT
  • 2 layers321.5 × 116.7 mmIMACS Keyboard, the printed circuit board in 3D

    IMACS Keyboard

    UWARG/hardware

    PCB designs for the Waterloo Aerial Robotics Group

    123 parts59
  • 4 layers100 × 100 mmRpi pico printer board, the printed circuit board in 3D

    Rpi pico printer board

    jackw01/pi-pico-printer-board

    Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico

    224 parts42CERN-OHL-W-2.0
  • 2 layers31.1 × 66.2 mmVideo if ql vga, the printed circuit board in 3D

    Video if ql vga

    holmatic/video_if_ql_vga

    Video-to-VGA converter for Sinclair QL

    16 parts35GPL-3.0
  • 2 layers442.7 × 208.3 mmEurope ergo, the printed circuit board in 3D

    Europe ergo

    Supermagnum/Europe-ergo

    A 94 key ergonomic, split keyboard suitable for European countries.

    236 parts8GPL-3.0

Questions

How big is the Metaldetector PCB?

It measures 183.7 × 92.8 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Metaldetector use?

44 parts, built around the SC0915, LM386MX-1/NOPB-HXY and CD4066BM96. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Metaldetector KiCad files?

From the Petersdavis/balanced_pulse_induction_metal_detector repository on GitHub, at the commit this page was made from: the board is metaldetector.kicad_pcb and its schematic ControlSystemSubAssembly.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Metaldetector design in my own project?

Its repository states no licence, so its author keeps all rights: ask Petersdavis before reusing the design.