2 layers
2 layers83 × 57.5 mm
Wasabi(PCBlayout)
PeterRice4/wasabi2- Size
- 83 × 57.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 87
- Pads
- 213
- Tracks, vias
- 303, 24
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Jan 2024
- Updated
- 3 Mar 2025
Overview
Wasabi(PCBlayout) is an open-source printed circuit board by PeterRice4, from the PeterRice4/wasabi2 repository on GitHub. It is a 2-layer board of 83 × 57.5 mm with 51 parts on 87 nets, routed with 303 tracks and 24 vias.
It is built around the TEENSY 4.1, L298P and 1101M2S3CQE2, with the L78M05ABDT-TR, LTST-C191KRKT and MFU0805FF05000P100 among its other parts. Its parts include 18 diodes, 10 resistors, 9 capacitors, 6 ICs and 5 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
7
TEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorised
L298P
ZIP-152 2A 4.5V~7V Yes ZIP-15 Stepper Motor Driver ROHSHANSCHIP semiconductorStepper Motor Driver
1101M2S3CQE2
插件-30℃~+65℃ 120V 40,000 Cycles 6A Black PC Pin Rectangular Columnar SPDT Through Hole 插件 Slide Switches ROHSC&KSlide Switches
L78M05ABDT-TR
TO-252-2(DPAK)-40℃~+125℃@(Tj) 1 2V@(350mA) 35V 40uV 500mA 5V 62dB@(120Hz) 6mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LTST-C191KRKT
0603-55℃~+85℃ 130° 20mA 2V 54mcd 631nm 639nm 75mW Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
MFU0805FF05000P100
0805Disposable FusesVishay Intertechnology
XT30PW-M
-- Power connector / plug connector ROHSChangzhou Amass ElecUncategorised
README
README.mdWasabi
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | LTST-C191KRKT | Wasabi(Footprints):LED_LTST-C191KRKT_LTO(footprint) | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10 |
| 8 | C | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C6, C7, C8, C9 |
| 8 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R5, R6, R7, R9, R10 |
| 8 | RF01VM2S | Diode_SMD:D_SOD-123F | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | HEF4104BT_653 | Wasabi(Footprints):HEF4104BT,653(footprint) | U1, U3 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2 |
| 1 | 1101M2S3CQE2 | Wasabi(Footprints):Switch1101M2S3CQE2(footprint) | U4 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | Conn_01x03_Pin | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | L298P | Wasabi(Footprints):L298p(footprint) | IC1 |
| 1 | L78M05ABDT-TR | Wasabi(Footprints):L78M05ABDT-TR(footprint) | U5 |
| 1 | MFU0805FF05000P100 | Wasabi(Footprints):MFU08055.00TR-ND(footprint) | F1 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | Screw_Terminal_01x04 | Wasabi(Footprints):4pinScrewTerminal(footprint) | J1 |
| 1 | Screw_Terminal_01x07 | Wasabi(Footprints):7pinScrewTerminal(footprint) | J4 |
| 1 | Screw_Terminal_01x08 | Wasabi(Footprints):8pinScrewTerminal(footprint) | J5 |
| 1 | Teensy4.1 | Wasabi(Footprints):Teensy41 (footprint NEW) | U2 |
| 1 | XT30PW-M | Wasabi(Footprints):AMASS_XT30PW-M(footprint) | J3 |
More from PeterRice4/wasabi2
1Similar boards
- 2 layers91.4 × 75.6 mm
Buck converter V6
HakanD1/24v-to-5v-50w-buck-converter-stm32
24V to 5V 50W Digital Controlled Buck Converter Hardware, Software, and Control Design. Features an STM32-based closed-loop PI regulation, 120kHz PWM, custom PCB, and a Nextion HMI display interface.
88 partsMIT - 2 layers50.8 × 50.8 mm
- 2 layers
- 4 layers97 × 105.5 mm
STARDRIVE SHIELD V1 0
themarcolab/Stardrive-Shield
With STARDRIVE SHIELD you can implement from 6 step to FOC motor control algorithms.
193 parts2 - 2 layers220.2 × 164.9 mm
- 2 layers139.7 × 114.3 mm
Self balancing robot
K0nradG/self-balancing-robot
Self-balancing robot powered by nRF52840 and Zephyr RTOS, with BLE control, OTA updates, and a Raspberry Pi camera interface designed for future autonomous navigation.
36 parts4Apache-2.0 - 2 layers45 × 120 mm
Remote
Dawn-Of-Justice/project-revgen
A voice-controlled system designed to help elderly people interact with electronic devices through natural language commands in their native language.
39 parts1 - 2 layers113 × 70 mm
Questions
How big is the Wasabi(PCBlayout) PCB?
It measures 83 × 57.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wasabi(PCBlayout) use?
51 parts, built around the TEENSY 4.1, L298P, 1101M2S3CQE2 and L78M05ABDT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wasabi(PCBlayout) KiCad files?
From the PeterRice4/wasabi2 repository on GitHub, at the commit this page was made from: the board is Wasabi.v1.1/wasabi(PCBlayout)/wasabi(PCBlayout).kicad_pcb and its schematic Wasabi.v1.1.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wasabi(PCBlayout) design in my own project?
Its repository states no licence, so its author keeps all rights: ask PeterRice4 before reusing the design.