Skip to the content
123456789101112131415

L298P

HANSCHIP semiconductorExtended

2 2A 4.5V~7V Yes ZIP-15 Stepper Motor Driver ROHS

Part id
hanschip-semiconductor/L298P
Category
Stepper Motor Driver
Package
ZIP-15
Pins
15
In stock
109 at JLCPCB (C19723727)
Used on
20 open-source boards

Overview

The L298P is a stepper Motor Driver made by HANSCHIP semiconductor in a ZIP-15 package with 15 pins. 2 2A 4.5V~7V Yes ZIP-15 Stepper Motor Driver ROHS.

PCBKit's library has its footprint (EasyEDA_Cloud:HZIP-15-TH_TDA7377L-J15-A-T, from EasyEDA), ready for a KiCad board. 109 are in stock at JLCPCB (part C19723727). 20 open-source boards in 14 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

123456789101112131415
EasyEDA_Cloud:HZIP-15-TH_TDA7377L-J15-A-TFrom EasyEDA

From the datasheet

10
Supply, most
36 V · VS, recommended operating max · p. 4
Supply, least
4.5 V · VSS, recommended operating min · p. 4
Supply, most
7 V · VSS, recommended operating max · p. 4
Supply, absolute maximum
38 V · VS, absolute max · p. 3
Supply, absolute maximum
7 V · VSS, absolute max · p. 3
Takes working
57 mA · sum of VS and VSS typical, Ven=H, IL=0, Vi=H · p. 4
Takes at most
82 mA · sum of VS and VSS max quiescent currents, Ven=H, IL=0, Vi=H · p. 4
Takes asleep
10 mA · sum of VS and VSS max, Ven=L, Vi=X · p. 4
Gives
2 A · per channel DC absolute max · p. 3
Edge
100 ns · typical sink rise time, enable switching · p. 4

What it is and has

5
Driver
双路全桥式驱动器 · p. 1
Total DC current
4A · p. 1
Protection
内置高温保护 · p. 1
Logic inputs
4 inputs and 2 enable inputs, TTL compatible · p. 6
Package
ZIP-15/Multiwatt-15 · p. 1

Around it

3
cap 100nf
between VS and GND; 无极性;电容尽量靠近地;远处有大电容时,另加小电容靠近芯片电源端。 · p. 6
res 检测电阻
between SENSING A and GND; 用于控制负载电流;非绕线式,接地端靠近芯片的地;阻值未给出。 · p. 3
res 检测电阻
between SENSING B and GND; 用于检测电流;非绕线式,接地端靠近芯片的地;阻值未给出。 · p. 6

Specifications

48
ParameterConditionsAs printedPage
电源电压 Vs电源及输出尖峰电压都小于此值max 38 V3
逻辑电源电压 Vssmax 7 V3
输入和使能端电压 Vi,enmin -3 · max 7 V3
封装输出电流(每一通道)不反复的(t=100us) Io每一通道,不反复的,t=100usmax 3 A3
反复的(80%on-20%Off,ton=10ms) Io每一通道,80%on-20%Off,ton=10msmax 2.5 A3
DC 工作 Io每一通道max 2 A3
电源电压 Vsensmin -1 · max 2.3 V3
逻辑电源电压 Ptotmax 25 W3
电源电压(Pin 4) VsVs=42V,Vss=5V,Tj=25℃;工作情况下(*note2);minimum printed as VIH+2.5max 36 V4
逻辑电源电压(Pin9) VssVs=42V,Vss=5V,Tj=25℃min 4.5 · typ 5 · max 7 V4
静态工作电流(Pin4) IsVs=42V,Vss=5V,Tj=25℃;Ven=H;IL=0 Vi=Ltyp 13 · max 22 mA4
静态工作电流(Pin4) IsVs=42V,Vss=5V,Tj=25℃;Ven=H;IL=0 Vi=Htyp 50 · max 70 mA4
静态工作电流(Pin4) IsVs=42V,Vss=5V,Tj=25℃;Ven=L Vi=Xmax 4 mA4
Vss 端静态工作电(Pin9) IssVs=42V,Vss=5V,Tj=25℃;Ven=H;IL=0 Vi=Ltyp 27 · max 36 mA4
Vss 端静态工作电(Pin9) IssVs=42V,Vss=5V,Tj=25℃;Ven=H;IL=0 Vi=Htyp 7 · max 12 mA4
Vss 端静态工作电(Pin9) IssVs=42V,Vss=5V,Tj=25℃;Ven=L Vi=Xmax 6 mA4
输入低电压(pin5,7,10,12) ViLVs=42V,Vss=5V,Tj=25℃min -0.3 · max 1.5 V4
输入高电压(pin5,7,10,12) ViHVs=42V,Vss=5V,Tj=25℃;maximum printed as Vssmin 2.3 V4
低电压输入电流(pin5,7,10,12) IiLVs=42V,Vss=5V,Tj=25℃;Vi=Lmax -10 uA4
高电压输入电流(pin5,7,10,12) IiHVs=42V,Vss=5V,Tj=25℃;Vi=H ≤ Vss-0.6Vtyp 30 · max 100 uA4
使能端低电压(pins6,10) Ven=LVs=42V,Vss=5V,Tj=25℃min -0.3 · max 1.5 V4
使能端高电压(pins6,10) Ven=HVs=42V,Vss=5V,Tj=25℃;maximum printed as Vssmin 2.3 V4
低压使能电流(pins6,10) Ien=LVs=42V,Vss=5V,Tj=25℃;Ven=Lmax -10 uA4
高压使能电流(pins6,10) Ien=HVs=42V,Vss=5V,Tj=25℃;Vi=H ≤ Vss-0.6Vtyp 30 · max 100 uA4
拉电流时饱和压降 VCEsat(H)Vs=42V,Vss=5V,Tj=25℃;IL=1Atyp 1.35 · max 1.7 V4
拉电流时饱和压降 VCEsat(H)Vs=42V,Vss=5V,Tj=25℃;IL=2Atyp 2 · max 2.7 V4
灌电流时饱和压降 VCEsat(L)Vs=42V,Vss=5V,Tj=25℃;IL=1Atyp 1.2 · max 1.6 V4
灌电流时饱和压降 VCEsat(L)Vs=42V,Vss=5V,Tj=25℃;IL=2Atyp 1.7 · max 2.3 V4
总饱和压降 VCEsatVs=42V,Vss=5V,Tj=25℃;IL=1Amax 3.2 V4
总饱和压降 VCEsatVs=42V,Vss=5V,Tj=25℃;IL=2Amax 4.9 V4
检测电压(pins 1,15) VsenseVs=42V,Vss=5V,Tj=25℃min -1 · max 2 V4
拉电流关断延迟时间 T1(Vi)Vs=42V,Vss=5V,Tj=25℃;0.5Vi to 0.9 ILtyp 1.5 us4
拉电流下降时间 T2(Vi)Vs=42V,Vss=5V,Tj=25℃;0.9 IL to 0.1 ILtyp 0.2 us4
拉电流开机延迟时间 T3(Vi)Vs=42V,Vss=5V,Tj=25℃;0.5Vi to 0.1 ILtyp 2 us4
拉电流上升时间 T4(Vi)Vs=42V,Vss=5V,Tj=25℃;0.1 IL to 0.9 ILtyp 0.7 us4
灌电流关断延迟时间 T5(Vi)Vs=42V,Vss=5V,Tj=25℃;0.5Vi to 0.9 ILtyp 0.7 us4
灌电流下降时间 T6(Vi)Vs=42V,Vss=5V,Tj=25℃;0.9 IL to 0.1 ILtyp 0.25 us4
灌电流开机延迟时间 T7(Vi)Vs=42V,Vss=5V,Tj=25℃;0.5Vi to 0.1 ILtyp 1.6 us4
灌电流上升时间 T8(Vi)Vs=42V,Vss=5V,Tj=25℃;0.1 IL to 0.9 ILtyp 0.2 us4
变换频率 fc(Vi)Vs=42V,Vss=5V,Tj=25℃;IL=2Atyp 25 · max 40 KHz4
拉电流关断延迟时间 T1(Ven)Vs=42V,Vss=5V,Tj=25℃;0.5Vi to 0.9 ILtyp 3 us4
拉电流下降时间 T2(Ven)Vs=42V,Vss=5V,Tj=25℃;0.9 IL to 0.1 ILtyp 1 us4
拉电流开机延迟时间 T3(Ven)Vs=42V,Vss=5V,Tj=25℃;0.5Vi to 0.1 ILtyp 0.3 us4
拉电流上升时间 T4(Ven)Vs=42V,Vss=5V,Tj=25℃;0.1 IL to 0.9 ILtyp 0.4 us4
灌电流关断延迟时间 T5(Ven)Vs=42V,Vss=5V,Tj=25℃;0.5Vi to 0.9 ILtyp 2.2 us4
灌电流下降时间 T6(Ven)Vs=42V,Vss=5V,Tj=25℃;0.9 IL to 0.1 ILtyp 0.35 us4
灌电流开机延迟时间 T7(Ven)Vs=42V,Vss=5V,Tj=25℃;0.5Vi to 0.1 ILtyp 0.25 us4
灌电流上升时间 T8(Ven)Vs=42V,Vss=5V,Tj=25℃;0.1 IL to 0.9 ILtyp 0.1 us4

Pins, by the datasheet

15
1 SENSING A
在该脚和地之间接一个检测电阻,来控制负载电流。 · p. 3
2 OUTPUT 1
A 桥输出,输出电流由 1 脚来监控。 · p. 3
3 OUTPUT 2
A 桥输出,输出电流由 1 脚来监控。 · p. 3
4 VS
为输出供电,通过一个无感电容器接地。 · p. 3
5 INPUT 1
A 桥的 TTL 兼容输入。 · p. 3
6 ENABLE A
TTL 兼容使能输入,输入低电平使桥截止。 · p. 3
7 INPUT 2
A 桥的 TTL 兼容输入,同 5。 · p. 3
8 GND
地。 · p. 3
9 VSS
逻辑单元供电电源,通过 100nF 电容接地。 · p. 3
10 INPUT 3
B 桥的 TTL 兼容输入。 · p. 3
11 ENABLE B
TTL 兼容使能输入,输入低电平使桥截止。 · p. 3
12 INPUT 4
B 桥的 TTL 兼容输入。 · p. 3
13 OUTPUT 3
B 桥输出,输出电流由 15 脚来监控。 · p. 3
14 OUTPUT 4
B 桥输出,输出电流由 15 脚来监控。 · p. 3
15 SENSING B
在该脚和地之间接一个检测电阻,来控制负载电流,同 1。 · p. 3

Ordering codes, by the datasheet

1
L298P
ZIP-15/Multiwatt-15 · 打印名称 L298P,L298;管装;500 只/盒 · p. 1

Open-source boards using it

20See all 20
  • 2 layers172 × 230 mmIndegoMower, the printed circuit board in 3D

    IndegoMower

    MS71/IndegoRover

    new MainBoard for Indego Lawn Mower

    34 parts7
  • 2 layers121.5 × 115 mmIrrigationController, the printed circuit board in 3D

    IrrigationController

    alorcs/Irrigation-System-v2

    The external footprints used can be found in the Imports folder.

    115 partsApache-2.0
  • 2 layersSwervePCB, the printed circuit board in 3D

    SwervePCB

    andrewccard/SwervePCB

    pcb for small scale swerve drive robot

    79 parts
  • 4 layers83.2 × 78.1 mmShield offset, the printed circuit board in 3D

    Shield offset

    apmarshall3/general-purpose-robotics-shield

    125 parts
  • 2 layers49 × 110.5 mmPcb suiveur, the printed circuit board in 3D

    Pcb suiveur

    bejaouihamza/CUSTOM_ROBOT_PCB_WITH_ESP32

    Key Features 🚀 Core Components ESP32-C3-WROOM-2 – RISC-V-based MCU with WiFi 4 & Bluetooth 5 (BLE)

    60 parts
  • 2 layersMicromouse, the printed circuit board in 3D

    Micromouse

    cep-micromouse/schematics

    Schematics for Chuck

    28 partsMIT
  • 2 layers100 × 88 mmArduinoDCC++, the printed circuit board in 3D

    ArduinoDCC++

    danielvilas/DigitalTrains

    Digital Trains

    94 partsMIT

Questions

Is there a KiCad symbol and footprint for the L298P?

Yes. the footprint EasyEDA_Cloud:HZIP-15-TH_TDA7377L-J15-A-T, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L298P?

ZIP-15, with 15 pins. Its footprint is drawn on this page.

Where is the L298P datasheet?

HANSCHIP semiconductor publishes it: the Datasheet link on this page opens it.

Where can I order the L298P?

JLCPCB lists it as part C19723727, with 109 in stock; the sellers' links on this page open their listings.

Which open-source boards use the L298P?

20 boards in 14 repositories on GitHub; the most starred are listed on this page, with their KiCad files.