2 layers152.9 × 58.6 mm
Mini sequencer
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
73 parts915
4 layers100 × 80 mm
Retropilot stm32f405 ecu
florianbrede-ayet/RetroPilotECU-PCB3- Size
- 100 × 80 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 109
- Nets
- 115
- Pads
- 460
- Tracks, vias
- 2,113, 358
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Aug 2020
- Updated
- 26 Aug 2020
Overview
Retropilot stm32f405 ecu is an open-source printed circuit board by florianbrede-ayet, from the florianbrede-ayet/RetroPilotECU-PCB repository on GitHub. It is a 4-layer board of 100 × 80 mm with 109 parts on 115 nets, routed with 2,113 tracks and 358 vias.
It is built around the TJA1040T, L298P and SM4007, with the UA78M33QDCYRG4Q1 among its other parts. Its parts include 16 diodes, 2 ICs and 2 inductors. It belongs with the STM32 boards of this library.
Main components
4
TJA1040T
SOP-8-40℃~+125℃ 12uA 1Mbps 4.5V~5.5V 70mA CAN Transceiver SOP-8 CAN Transceivers ROHSTokmasCAN Transceivers
L298P
ZIP-152 2A 4.5V~7V Yes ZIP-15 Stepper Motor Driver ROHSHANSCHIP semiconductorStepper Motor Driver
SM4007
MELFMELF Diodes - General Purpose ROHSYONGYUTAIDiodes - General Purpose
UA78M33QDCYRG4Q1
SOT-223-4-40℃~+125℃@(Tj) 1 25V 2V 3.3V 40uV 500mA 62dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
109| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | SM4007 | Diode_SMD:D_SOD-123F | D1, D2, D2_1, D2_2, D2_3, D2_4, D2_5, D2_6, D2_7, D2_8, D3, D4, D5, D6, D7, D8 |
| 12 | 100nF | Capacitor_SMD:C_0402_1005Metric | C_6002, C_IN_1, C_IN_2, C_IN_3, C_IN_4, C_IN_5, C_IN_6, C_L298_5V1, C_L298_5V2, C_L298_12V1, C_L298_12V2, C_RES1 |
| 11 | 10K | Resistor_SMD:R_0603_1608Metric | R_6002_1, R_6002_2, R_6002_3, R_6002_4, R_6002_5, R_6002_6, R_BOOT_0, R_BOOT_1, R_DIV11, R_DIV21, R_RES1 |
| 9 | Conn_02x03_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_Vertical | J_CAN1_H1, J_CAN1_L1, J_CAN2_H1, J_CAN2_L1, J_CAN3_H1, J_CAN3_L1, J_MCP1_H1, J_MCP2_H1, J_MCP2_L1 |
| 5 | 0.33uF | Capacitor_SMD:C_0805_2012Metric | C_MCP1, C_MCP2, C_VIN1, C_VIN33_1, C_VOUT1 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R_AC_POTI1, R_AC_POTI2, R_RS_MCP1, R_RS_MCP2 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 120 | Resistor_SMD:R_0603_1608Metric | R_CAN1, R_CAN2, R_CAN3 |
| 3 | 510 | Resistor_SMD:R_0603_1608Metric | R_D_BL1, R_D_GR1, R_D_RED1 |
| 3 | Conn_01x02_Male | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J_CAN1_120, J_CAN2_120, J_CAN3_120 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R_DIV12, R_DIV22 |
| 2 | 2.2uF | Capacitor_SMD:C_1206_3216Metric | C_VCAP1, C_VCAP2 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C_HSE_I1, C_HSE_O1 |
| 2 | Conn_01x06_Female (Actuator) | Connector_Molex:Molex_Mini-Fit_Jr_5569-06A2_2x03_P4.20mm_Horizontal | J_ACTUATOR1, J_ACTUATOR2 |
| 2 | Conn_01x08_Female Inputs | Connector_Molex:Molex_CLIK-Mate_502386-0870_1x08-1MP_P1.25mm_Horizontal | J_INOUT1, J_INOUT2 |
| 2 | L298P | Package_SO:HSOP-20-1EP_11.0x15.9mm_P1.27mm_SlugDown | L298P_DRIVER1, L298P_DRIVER2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW_BOOT1, SW_RES1 |
| 2 | TJA1040T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U_TJA1040_1, U_TJA1040_2 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H | C_VIN33_2 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C_IN_0 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric | C_IN_7 |
| 1 | 8Mhz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y_8MHZ1 |
| 1 | Conn_01x02_Female | Connector_Molex:Molex_CLIK-Mate_502386-0270_1x02-1MP_P1.25mm_Horizontal | J_SERIAL_3 |
| 1 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J_SERIAL_DEBUG1 |
| 1 | Conn_01x02_Male | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J_PWR1 |
| 1 | Conn_01x03_Female | Connector_Molex:Molex_CLIK-Mate_502386-0370_1x03-1MP_P1.25mm_Horizontal | J_VSS_SENSOR1 |
| 1 | Conn_01x04_Female (CAN2) | Connector_Molex:Molex_Mini-Fit_Jr_5569-04A2_2x02_P4.20mm_Horizontal | J_CAN_2 |
| 1 | Conn_01x04_Female (CAN3) | Connector_Molex:Molex_Mini-Fit_Jr_5569-04A2_2x02_P4.20mm_Horizontal | J_CAN_3 |
| 1 | Conn_01x04_Female (Main CAN1) | Connector_Molex:Molex_Mini-Fit_Jr_5569-04A2_2x02_P4.20mm_Horizontal | J_CAN_1 |
| 1 | Conn_01x04_Male (I2C Display) | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J_I2C_DISP1 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_Vertical | J_MCP1_L1 |
| 1 | Conn_ST_STDC14 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J_STDC1 |
| 1 | Ferrite_Bead_Small | Resistor_SMD:R_0805_2012Metric | FB_VDDA1 |
| 1 | LED BL | LED_SMD:LED_0603_1608Metric | D_BLUE1 |
| 1 | LED GR | LED_SMD:LED_0603_1608Metric | D_GREEN1 |
| 1 | LED RED | LED_SMD:LED_0603_1608Metric | D_RED1 |
| 1 | MCP6002-xMS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6002 |
| 1 | NCV7805BD2TR4G | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U_NCV7805 |
| 1 | PANDA CONNECTOR | my_custom_parts:C-OBD-II-16M-E-N-12V | J_OBD1 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | UA78M33QDCYRG4Q1 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U_UA78M33Q1 |
Similar boards
- 2 layers99.1 × 45.7 mm
- 2 layers77 × 42 mm
- 4 layers46.8 × 52.4 mm
- 2 layers148.7 × 104.3 mm
- 2 layers172 × 230 mm
- 2 layers121.5 × 115 mm
IrrigationController
alorcs/Irrigation-System-v2
The external footprints used can be found in the Imports folder.
115 partsApache-2.0 - 2 layers
Questions
How big is the Retropilot stm32f405 ecu PCB?
It measures 100 × 80 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Retropilot stm32f405 ecu use?
109 parts, built around the TJA1040T, L298P, SM4007 and UA78M33QDCYRG4Q1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Retropilot stm32f405 ecu KiCad files?
From the florianbrede-ayet/RetroPilotECU-PCB repository on GitHub, at the commit this page was made from: the board is retropilot_stm32f405_ecu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Retropilot stm32f405 ecu design in my own project?
Its repository states no licence, so its author keeps all rights: ask florianbrede-ayet before reusing the design.