
PersonalPCB BC
Bumb1eris/PCB_Business_Card
A coin cell powered PCB business card that can play snake

A Paw shaped SAO that plays a memory game
Pawb sao is an open-source printed circuit board by PawprintPrototyping, from the PawprintPrototyping/pawb_sao_memory_game repository on GitHub. It is a 2-layer board of 40.4 × 40.6 mm with 33 parts on 30 nets, routed with 221 tracks and 44 vias.
It is built around the CR2032 and MMBT3904. Its parts include 6 resistors, 4 diodes, 4 switches, 2 capacitors and 2 connectors. It belongs with the RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 130 | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 3V3 | TestPoint:TestPoint_Pad_D1.5mm | TP3, TP4 |
| 1 | BATT_MOUNT | MountingHole:MountingHole_2.2mm_M2 | H2 |
| 1 | BLUE | Button_Switch_SMD:SW_SPST_EVQP0 | SW4 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | BUZZER | pawb_sao:FUET-9018 | LS1 |
| 1 | CH32V003FxPx | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | CR2032 | pawb_sao:BH-25C-1_ADM_EZ | BT1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | GREEN | Button_Switch_SMD:SW_SPST_EVQP0 | SW1 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | KEYCHAIN | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | PROG | pawb_sao:Paw-Connect_RevB_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | RED | Button_Switch_SMD:SW_SPST_EVQP0 | SW2 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | SAO | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | SWIO | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | U_RX | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | U_TX | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | YELLOW | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | YELLOW | Button_Switch_SMD:SW_SPST_EVQP0 | SW3 |
The 31 most common of 33 parts.

Bumb1eris/PCB_Business_Card
A coin cell powered PCB business card that can play snake

Essenter24/STM32-Weather-Station
STM32 Weather Station project with self-designed PCB, based on BME690 sensor






It measures 40.4 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the CR2032 and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PawprintPrototyping/pawb_sao_memory_game repository on GitHub, at the commit this page was made from: the board is hardware/pawb_sao.kicad_pcb and its schematic hardware/pawb_sao.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PawprintPrototyping before reusing the design.