
Kampela E1
Alzymologist/Kampela
Hardware signer and key storage for Substrate ecosystem

PCB and Schematics for Curtain Opener Client
CurtainOpeners is an open-source printed circuit board by OpenSource-HomeProjects, from the OpenSource-HomeProjects/curtain-openers-client-pcb repository on GitHub. It is a 2-layer board of 53.8 × 39.6 mm with 28 parts on 27 nets, routed with 203 tracks and 37 vias.
It is built around the STM32C031K4U6 and AP63200WU. Its parts include 9 capacitors, 5 resistors, 4 ICs, 2 connectors and 2 switches. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C5 |
| 2 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C1, C8 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R4, R6 |
| 2 | 22 uF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | SW_Reed | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | SW1, SW2 |
| 1 | 100 pF | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 100uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 182k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 32K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 4.7 uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 62k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | AP63200WU | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Motor_DC | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | M1 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U3 |
| 1 | STM32C011F4U6TR | Package_DFN_QFN:ST_UFQFPN-20_3x3mm_P0.5mm | U4 |
| 1 | STM32C031K4U6 | Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J2 |
The 24 most common of 28 parts.

Alzymologist/Kampela
Hardware signer and key storage for Substrate ecosystem


Kalapaja/kampela-hardware
Hardware design schematics and supplementary files for Kampela hardware signer

a-little-wifi/frmw-dcin
Barrel jack laptop power supply adapter module for framework laptops

DriveLink-HM/DriveLink
A Variable Frequency Drive, designed and built for Projekt Mechatronik in SoSe26

shxshxshxshx/VoronToolheadPCB
USB Toolhead Board for Voron Stealthburner


AgustinPrietoValdez/competition-robots
Custom competition robots — maze/micromouse (MISA), sumo (TATAMI 1) & mini-sumo (RUCHO). KiCad PCBs, STM32/Arduino firmware, Fusion 360. National champion & international prizes — by EDNAROBOTICS.
It measures 53.8 × 39.6 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the STM32C031K4U6 and AP63200WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OpenSource-HomeProjects/curtain-openers-client-pcb repository on GitHub, at the commit this page was made from: the board is CurtainOpeners.kicad_pcb and its schematic CurtainOpeners.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OpenSource-HomeProjects before reusing the design.