Skip to the content
2 layers44.2 × 86.6 mmCapstone transmitter, the printed circuit board in 3D

Repository for the 2022-2023 Mars Rover RDF Capstone Project

Size
44.2 × 86.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
51
Nets
66
Pads
189
Tracks, vias
344, 63
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
29 Apr 2023
Updated
13 Dec 2024

Overview

Capstone transmitter is an open-source printed circuit board by OSURoboticsClub, from the OSURoboticsClub/Rover_RDF_Capstone repository on GitHub. It is a 2-layer board of 44.2 × 86.6 mm with 51 parts on 66 nets, routed with 344 tracks and 63 vias.

It is built around the RP2040, TPS613222ADBV and W25Q128JVSIQ, with the TPS2110APW and NSR0320MW2T1G among its other parts. Its parts include 21 capacitors, 9 resistors, 9 connectors, 5 ICs and 2 diodes. It belongs with the RP2040 boards of this library.

Main components

5

README

README.md

Rover_RDF_Capstone

Repository for the 2022-2023 Mars Rover ECE Capstone Project "Lost Without Direction"

About the Project

"Lost Without Direction" aims to build a robust system to localize our rover in the field to improve communications. The project aims to fix the issues in the latency of communication with the rover when it travels out of the line of sight of the main communications antenna. To remedy this our team took inspiration from common radio direction-finding/radio triangulation techniques and built an antenna rotator that will follow the movement of the rover at a threshold of +/-45 degrees. We utilize GPS coordinates of both the rover and the antenna itself to calculate a bearing to point the antenna towards. The real-time position from the rover is sent over LoRA to a receiver at the base station. Then the angle is calculated and sent to a control module on the antenna stand over UART serial. This repository contains the finalized code for the UI, Tracking Algorithm, and Microcontroller libraries from June 2023. It also contains schematics of the final PCB presented at the 2023 Engineering Expo. This project is still under development to improve localization accuracy, with planned upgrades to both the hardware and software.

Planned Upgrades:

  • New GPS module that boasts 1.5m accuracy and increased noise tolerance as opposed to the 2.5m accuracy of the current chip
  • Development of a sensor fusion algorithm with GPS/IMU to smooth out position reports from the rover, and allow for dead-reckoning via the IMU if the GPS should become unavailable
  • Rework of the serial communication network from the ground station to the antenna module to reduce the amount of wires needed

Parts

51
QtyValueFootprintReferences
10100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC3, C4, C5, C6, C7, C9, C11, C12, C13, C14
510uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC15, C16, C17, C20, C21
3MountingHoleMountingHole:MountingHole_2.1mmH1, H2, H3
21kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
21uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8, C10
227.4Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R4
227pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2
2Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6, J7
2Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5, J8
10.1uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC18
1120pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC19
1165kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR8
12.2uInductor_SMD:L_0402_1005MetricL1
15Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9
1500Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6
1Conn_01x01_MaleConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ15
1Conn_01x02_MaleConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ4
1Conn_01x03_MaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1Conn_01x05_MaleConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ3
1Conn_01x09_MaleConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ2
1CrystalCrystal:Crystal_SMD_HC49-SDY1
1DNFResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5
1LEDLED_SMD:LED_0805_2012MetricD1
1NCP1117-3.3_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U4
1NSR0320MW2T1GDiode_SMD:D_SOD-323D2
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU1
1TBDResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7
1TPS2110APWSnapEDA Library:SOP65P640X120-8NU5
1TPS613222ADBVPackage_TO_SOT_SMD:SOT-23-5U3
1W25Q128JVSPackage_SO:SOIC-8_5.23x5.23mm_P1.27mmU2

Similar boards

  • 4 layers55.3 × 125.9 mmMicroTAC, the printed circuit board in 3D

    MicroTAC

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    142 parts915
  • 6 layers76 × 78 mmH743-lcd dev, the printed circuit board in 3D

    H743-lcd dev

    rohamid/h743-lcd-dev

    temp repo for H743 lcd development board

    138 parts
  • 2 layers82 × 134 mmPcb badge, the printed circuit board in 3D

    Pcb badge

    john0312/hitcon-pcb-badge

    execute fw/merge.py to merge STM32CubeIDE generated main.c with user code in main.cc into main.cc.

    258 parts47BSD-3-Clause
  • 2 layers36 × 54 mmNodePCB, the printed circuit board in 3D

    NodePCB

    Pegoku/StorageSystem

    16 parts12
  • 4 layers202.5 × 307.5 mmElement foxtrot, the printed circuit board in 3D

    Element foxtrot

    visionspacetec/VST104-Foxtrot

    VST104 Flat-Sat board - referred as element_foxtrot

    147 parts5
  • 4 layers61 × 46 mmTracking device, the printed circuit board in 3D

    Tracking device

    villetiukuvaara/SpyThing-Hardware

    128 parts4GPL-3.0
  • 2 layers90.4 × 114 mmHh2024, the printed circuit board in 3D

    Hh2024

    badgeteam/hackerhotel-2024-hardware

    Conference badge for Hackerhotel 2024

    119 parts3CERN-OHL-P-2.0
  • 4 layers95 × 86 mmKami, the printed circuit board in 3D

    Kami

    Nicolai-Electronics/kami-hardware

    Kami is a modernized re-imagining of the SHA2017 epaper badge by Badge.Team.

    118 parts2CERN-OHL-P-2.0

Questions

How big is the Capstone transmitter PCB?

It measures 44.2 × 86.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Capstone transmitter use?

51 parts, built around the RP2040, TPS613222ADBV, W25Q128JVSIQ and TPS2110APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Capstone transmitter KiCad files?

From the OSURoboticsClub/Rover_RDF_Capstone repository on GitHub, at the commit this page was made from: the board is transceiver_ schematic_docs/capstone_transmitter.kicad_pcb and its schematic transceiver_ schematic_docs/capstone_transmitter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Capstone transmitter design in my own project?

Its repository states no licence, so its author keeps all rights: ask OSURoboticsClub before reusing the design.