8 layers45 × 70 mm
6 layers50 × 40 mm
ZYNQ SoM
Nov4ou/ZYNQ-SoMOpen ZYNQ-SoM.kicadpro with KiCad 10.0 or newer.
- Size
- 50 × 40 mm
- Copper layers
- 6
- Thickness
- 1.56 mm
- Parts
- 147
- Nets
- 298
- Pads
- 988
- Tracks, vias
- 4,031, 618
- Pours
- 42
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Jun 2026
- Updated
- 12 Sep 2026
Overview
ZYNQ SoM is an open-source printed circuit board by Nov4ou, from the Nov4ou/ZYNQ-SoM repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 6-layer board of 50 × 40 mm with 147 parts on 298 nets, routed with 4,031 tracks and 618 vias.
It is built around the TPS62130ARGTR, W25Q256FVEIG and MT41K256M16TW-107P, with the SPX3819M5-L-3-3, CMLB041B-2R2MS and AXK580137YG among its other parts. Its parts include 86 capacitors, 34 resistors, 8 ICs, 3 inductors and 2 connectors. It belongs with the fPGA and programmable logic and computers and single-board computers boards and the FPGA and CPLD boards of this library.
Main components
6
TPS62130ARGTR
QFN-16-EP(3x3)-40℃~+85℃@(TA) 1 17uA 2.5MHz 3A 3V~17V 900mV~6V Adjustable Buck Buck Built-in Yes QFN-16-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
W25Q256FVEIG
WPDFN-8(6x8)-40℃~+85℃ 100,000 cycles 104MHz 120ms@(32KB) 2.7V~3.6V 20 Years 256Mbit 700us Power-on reset、Hardware Write Protection、Software Write Protection、Write enable latch、Absolute Write Protection SPI WPDFN-8(6x8) NOR FLASH ROHSWinbond ElecNOR FLASH
MT41K256M16TW-107P
Uncategorisedmicron
SPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCMLB041B-2R2MS
SMDSMD SMT ROHSCyntecUncategorised
AXK580137YG
SMD,P=0.5mm0.5mm 2 80P Gold Slot Type Butting Surface Mount,Vertical SMD,P=0.5mm Board-to-Board and Backplane Connector ROHSPanasonicMezzanine Connectors (Board To Board)
README
hardware/kicad/README.mdKiCad source
Open ZYNQ-SoM.kicad_pro with KiCad 10.0 or newer.
ZYNQ-SoM.kicad_schis the root schematic.sheets/contains the hierarchical schematic sheets.ZYNQ-SoM.kicad_pcbis the six-layer board layout.ZYNQ-SoM.kicad_drucontains project design rules.lib/contains the project-local KiCad symbols,.prettyfootprint library, and 3D models.
Library tables use ${KIPRJMOD} paths, so the project should be portable after cloning.
Parts
147| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 100n | Capacitor_SMD:C_0402_1005Metric | C203, C301, C302, C303, C304, C305, C306, C307, C308, C309, C310, C311, C312, C313, C314, C503 +14 |
| 24 | 470n | Capacitor_SMD:C_0402_1005Metric | C201, C202, C508, C526, C530, C532, C539, C551, C554, C555, C556, C558, C559, C560, C563, C564 +8 |
| 12 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C522, C524, C525, C527, C533, C546, C548, C549, C550, C553, C562, C567 |
| 9 | 10u | Capacitor_SMD:C_0805_2012Metric | C501, C502, C509, C512, C519, C521, C523, C561, C701 |
| 9 | 80R6 | Resistor_SMD:R_0402_1005Metric | R303, R304, R305, R306, R307, R308, R309, R704, R705 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP405, TP406, TP501, TP502, TP503, TP504, TP505 |
| 5 | 20k | Resistor_SMD:R_0402_1005Metric | R207, R208, R209, R210, R211 |
| 4 | 4k7 | Resistor_SMD:R_0402_1005Metric | R202, R203, R206, R302 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H101, H102, H103, H104 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R501, R502, R507 |
| 3 | 100u | Capacitor_SMD:C_1206_3216Metric | C543, C544, C545 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C510, C511, C534 |
| 3 | 33R | Resistor_SMD:R_0402_1005Metric | R701, R702, R703 |
| 3 | 3n3 | Capacitor_SMD:C_0402_1005Metric | C505, C506, C516 |
| 3 | CMLB041B-2R2MS | Project:IND_CMLB041B-1R0MS | L501, L502, L503 |
| 3 | TPS62130ARGTR | Project:QFN50P300X300X100-17N-D | U501, U502, U504 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C507, C540 |
| 2 | 120OHM@100M | Inductor_SMD:L_0402_1005Metric | FB201, FB501 |
| 2 | 15k | Resistor_SMD:R_0402_1005Metric | R506, R509 |
| 2 | AXK580137YG | Project:AXK580137YG | J402, J403 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R706 |
| 1 | 13k | Resistor_SMD:R_0402_1005Metric | R505 |
| 1 | 18k7 | Resistor_SMD:R_0402_1005Metric | R508 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R205 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R504 |
| 1 | 240R | Resistor_SMD:R_0402_1005Metric | R301 |
| 1 | 33.3333MHz | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | U701 |
| 1 | 330R | Resistor_SMD:R_0402_1005Metric | R201 |
| 1 | 49.9k | Resistor_SMD:R_0402_1005Metric | R503 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D201 |
| 1 | MT41K256M16TW-107_P | Project:BGA96C80P9X16_1400X800X120 | U301 |
| 1 | SPX3819M5-L-3-3 | Project:SPX3819M5-L-3-3 | U503 |
| 1 | W25Q256FVEI | Project:SON127P800X600X80-9N-D | U202 |
| 1 | xc7z010clg400 | Package_BGA:Xilinx_CLG400 | U201 |
Similar boards
- 4 layers150 × 100 mm
- 8 layers50 × 42 mm
- 10 layers
- 8 layers167.2 × 95.4 mm
- 4 layers95.9 × 90.2 mm
KENSAT EPS v1.2
kenchangh/kensat
KENSAT, Edge-AI Compute in Orbit - A 2U CubeSat that runs a large language model on-orbit. A power-gated NVIDIA Jetson Orin Nano executes neural-network inference in space, and the results are downlinked over a custom…
218 parts119 - 2 layers52.3 × 50.3 mm
1016-Breadboard Power Supply
wilsondr9999/1016-Breadboard-Power-Supply
An add-on module for powering your breadboard with selectable rail voltages.
82 parts14AGPL-3.0 - 4 layers80 × 78 mm
Pi5 m2 reference
searchyourmind/fpga-highspeed-daq
SystemVerilog DAQ simulation portfolio: 63 tests, 33 E2E scenarios, DDR3 behavioral and PCIe transaction-level models. Separate PCB design study with retained FAILs; no hardware or timing-closure claims.
34 parts1
Questions
How big is the ZYNQ SoM PCB?
It measures 50 × 40 mm and has 6 copper layers, 1.56 mm thick.
What parts does the ZYNQ SoM use?
147 parts, built around the TPS62130ARGTR, W25Q256FVEIG, MT41K256M16TW-107P and SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ZYNQ SoM KiCad files?
From the Nov4ou/ZYNQ-SoM repository on GitHub, at the commit this page was made from: the board is hardware/kicad/ZYNQ-SoM.kicad_pcb and its schematic hardware/kicad/ZYNQ-SoM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ZYNQ SoM design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).