2 layers
4 layers150 × 100 mm
Zynq eame 1
DRubioG/Zynq-eame3Projects based on Zynq SoCs
- Size
- 150 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 185
- Nets
- 264
- Pads
- 1,268
- Tracks, vias
- 243, 29
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jan 2021
- Updated
- 19 Aug 2021
Overview
Zynq eame 1 is an open-source printed circuit board by DRubioG, from the DRubioG/Zynq-eame repository on GitHub, published under the MIT licence. It is a 4-layer board of 150 × 100 mm with 185 parts on 264 nets, routed with 243 tracks and 29 vias.
It is built around the CP2102N-A01-GQFN28R, TPS563201 and MT41K256M16TW-107P, with the FT2232HL, TPS3106K33DBV and MMBF170 among its other parts. Its parts include 68 resistors, 61 capacitors, 14 ICs, 9 transistors and 6 connectors. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
8
CP2102N-A01-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃ 13.7mA 195uA 3Mbps 3V~3.6V Transceiver USB 2.0 QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB Converters
TPS563201
UncategorisedTexas Instruments
MT41K256M16TW-107P
Uncategorisedmicron
FT2232HL
QFP64Dual High Speed USB to Multipurpose UART/FIFO ICFTDIUncategorisedTPS3106K33DBV
SOT23-63.3V UltraLow Supply-Current/Supply-Voltage Supervisory CircuitsTexas InstrumentsUncategorised
MMBF170
SOT-23-55℃~+150℃ 1 N-channel 11pF 2.1V 2.2Ω@10V 200mA 22pF 2pF 300mW 60V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
ASE-33.333MHZ-ET
SMD3225-4PSMD3225-4P Crystal Oscillators ROHSAbraconCrystal Oscillators
README
README.mdIntroducción / Introduction
[ES] Este es el repositorio en GitHub del blog soceame.wordpress.com en el que se colgará toda la información sobre cómo construir SoCs de Xilinx
[EN] This is the GitHub's repository of the soceame.wordpress.com's blog where it will be uploaded all information about how to build Xilinx's SoCs
Contenido / Content
[ES] En esta carpeta se ubicarán los documentos que explican la construcción de los SoCs
[EN] In this folder will be placed the documents which explaining how to build the SoCs
- Zynq-eame_0: ❗ No terminada / Unfinished ❗
[ES] Esta carpeta contiene los esquemáticos de la Zynq-eame_0 en pdf y en KiCad.
Esta placa está construida a partir de un XC7Z010-CLG400.
[EN] This folder contains the Zynq-eame_0' schematics in pdf and in KiCad.
This board is built from a XC7Z010-CLG400.
- Zynq-eame_UltraScale_0: ❗ Inicio / Started ❗
[ES] Esta carpeta contiene los esquemáticos de la Zynq-eame_UltraScale_0 en pdf y en KiCad.
Esta placa está construida a partir de un XCZU2CG-SBVA484.
[EN] This folder contains the Zynq-eame_UltraScale_0' schematics in pdf and in KiCad.
This board is built from a XCZU2CG-SBVA484.
[ES] Estos son proyectos Open Hardware
[EN] These are Open Hardware projects
Parts
185| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | 100nF | Capacitor_SMD:C_0805_2012Metric | C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32 +26 |
| 13 | 4.7K | Resistor_SMD:R_0805_2012Metric | R27, R28, R34, R37, R39, R42, R44, R47, R49, R52, R54, R57, R67 |
| 12 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R5, R6, R7, R25, R36, R41, R46, R51, R56 |
| 12 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C9, C10, C11, C12, C13, C14, C15, C16 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric | R26, R35, R40, R45, R50, R55 |
| 6 | LED_ALT | LED_SMD:LED_0805_2012Metric | FPGA_DONE1, LED_1, LED_2, LED_3, LED_4, LED_5 |
| 6 | SW_SPST | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W8.61mm_P2.54mm | ON_OFF1, SW_1, SW_2, SW_3, SW_4, SW_5 |
| 5 | 261 | Resistor_SMD:R_0805_2012Metric | R38, R43, R48, R53, R58 |
| 5 | MMBF170 | Package_TO_SOT_SMD:SOT-23 | Q5, Q6, Q7, Q8, Q9 |
| 5 | SW_Push | Button_Switch_SMD:SW_SPST_FSMSM | BT_1, BT_2, BT_3, BT_4, BT_5 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric | R9, R11, R13, R14 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R33, R59, R62, R63 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R32, R64, R68, R69 |
| 4 | 1k 1% | Resistor_SMD:R_0805_2012Metric | R19, R20, R21, R22 |
| 4 | 4.7uH | Inductor_SMD:L_0805_2012Metric | L1, L2, L3, L4 |
| 4 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | TPS563201 | ZYNQ_7000:TPS563201 | U1, U2, U3, U4 |
| 3 | 0R | Resistor_SMD:R_0805_2012Metric | R3, R16, R17 |
| 2 | 240R 1% | Resistor_SMD:R_0805_2012Metric | R18, R23 |
| 2 | 27pF | Capacitor_SMD:C_0805_2012Metric | C38, C39 |
| 2 | 33k | Resistor_SMD:R_0805_2012Metric | R8, R12 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R24, R29 |
| 2 | 4.7uF | Capacitor_SMD:CP_Elec_3x5.4 | C41, C42 |
| 2 | MT41K256M16TW-107_P | ZYNQ_7000:BGA-144_9x16_8.0x14.0mm | U6, U7 |
| 2 | PINES_ALIMENTACION | ZYNQ_7000:PINES_40 | U10, U12 |
| 2 | USB_B_Micro | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J2, J4 |
| 1 | 100nF | Resistor_SMD:R_0805_2012Metric | C36 |
| 1 | 12K | Resistor_SMD:R_0805_2012Metric | R61 |
| 1 | 12MHz | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm | Y1 |
| 1 | 1300 | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 2K2 | Resistor_SMD:R_0805_2012Metric | R60 |
| 1 | 3.3uF | Capacitor_SMD:C_0805_2012Metric | C45 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R70 |
| 1 | 4.7uF | Resistor_SMD:R_0805_2012Metric | C35 |
| 1 | 75k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 79k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 820 | Resistor_SMD:R_0805_2012Metric | R30 |
| 1 | 93C46 | ZYNQ_7000:EIAJ_SOIC | U13 |
| 1 | ASE-33.333MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-036AH-SMT_Horizontal | J5 |
| 1 | CP2102N-A01-GQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U8 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | FT2232H | Package_QFP:LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm | U11 |
| 1 | HDMI_A | Connector_HDMI:HDMI_A_Contact_Technology_HDMI-19APL2_Horizontal | J6 |
| 1 | LED_ALT | Diode_SMD:D_0805_2012Metric | D1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Wuerth_693072010801 | J3 |
| 1 | PINES_48 | ZYNQ_7000:PINES_48 | JP1 |
| 1 | PIN_25 | ZYNQ_7000:PINES_40 | JP2 |
| 1 | S25FL128S | ZYNQ_7000:S03016-(SOIC-16) | U14 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SRST_B1 |
| 1 | TPS3106K33DBV | ZYNQ_7000:SOT-23 | U9 |
| 1 | XC7Z020-CLG400 | ZYNQ_7000:BGA-400_20x20_17.0x17.0mm | U5 |
More from DRubioG/Zynq-eame
1Similar boards
- 8 layers45 × 70 mm
- 8 layers50 × 42 mm
- 10 layers
- 6 layers50 × 40 mm
- 8 layers167.2 × 95.4 mm
- 4 layers53 × 85 mm
- 2 layers114 × 89 mm
- 2 layers100 × 90 mm
Questions
How big is the Zynq eame 1 PCB?
It measures 150 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Zynq eame 1 use?
185 parts, built around the CP2102N-A01-GQFN28R, TPS563201, MT41K256M16TW-107P and FT2232HL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zynq eame 1 KiCad files?
From the DRubioG/Zynq-eame repository on GitHub, at the commit this page was made from: the board is Zynq-eame_1/KiCad/Zynq-eame_1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zynq eame 1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).