NeuroTinker/NeuroBytes_Motor_NeuronAll NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…
NeuroBytes Motor Neuron is an open-source printed circuit board by NeuroTinker, from the NeuroTinker/NeuroBytes_Motor_Neuron repository on GitHub. It is a 2-layer board of 51.2 × 28.4 mm with 29 parts on 38 nets, routed with 233 tracks and 29 vias.
It is built around the RCLAMP0503F.TCT and MMBT3904. Its parts include 7 capacitors, 7 resistors, 6 connectors, 3 ICs and 3 transistors. It belongs with the robots and motor control boards and the STM32 boards of this library.
The NeuroBytes Motor Neuron is an open-source hardware neuron simulator designed and sold by NeuroTinker, LLC.
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons Attribution-ShareAlike 4.0 license, available here: http://creativecommons.org/licenses/by-sa/4.0/. The NeuroBytes Motor Neuron is Certified Open Source Hardware as defined by OSHWA, certification number US000109.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | KiCad_Footprints:ZF_SMD_NonPol_0402 | R5, R6, R7 |
| 3 | JST_GH_4POS | KiCad_Footprints:ZF_CONN_JST_GH | P1, P2, P3 |
| 3 | MMBT3904 | KiCad_Footprints:ZF_SOT23-3L | Q1, Q2, Q3 |
| 2 | 0u1 | KiCad_Footprints:ZF_SMD_NonPol_0402_cap | C3, C5 |
| 2 | 100 | KiCad_Footprints:ZF_SMD_NonPol_0402 | R2, R3 |
| 2 | 1u | Capacitors_SMD:C_0603_HandSoldering | C1, C4 |
| 2 | 22u | KiCad_Footprints:ZF_SMD_nonpol_1206 | C6, C7 |
| 2 | SERVO_CONN | KiCad_Footprints:ZF_CONN_SERVO_HDR_SMT | P4, P5 |
| 1 | 10u | KiCad_Footprints:ZF_SMD_nonpol_1206 | C2 |
| 1 | 150 | KiCad_Footprints:ZF_SMD_NonPol_0402 | R1 |
| 1 | JMP | KiCad_Footprints:ZF_SMD_NonPol_0402 | R4 |
| 1 | JST_GH_5-pos | KiCad_Footprints:ZF_CONN_JST_GH_5POS | P6 |
| 1 | LD3985G33R | KiCad_Footprints:ZF_SOT23-5L | U2 |
| 1 | LED_RABG | KiCad_Footprints:ZF_LED_RGB_SunLED_XZMDKCBDDG45S-9_cast | D1 |
| 1 | LOGO | KiCad_Footprints:ZF_LOGO_Motor_Neuron | G*** |
| 1 | RClamp0503F | KiCad_Footprints:ZF_SMD_SOT-353 | U3 |
| 1 | STM32L011Gx | KiCad_Footprints:ZF_IC_UFQFPN28-050 | U1 |
| 1 | SW_PUSH | KiCad_Footprints:ZF_SW_Momentary_SideMtg | SW1 |
NeuroTinker/NeuroBytes_Force_Sensor
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…
NeuroTinker/NeuroBytes_NID
The Network Interface Device, or NID, is used to connect an Android tablet or phone to a NeuroBytes network, using UART and SWD depending on desired function.
NeuroTinker/NeuroBytes_Tonic_Neuron
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…
vincentBenet/keyboard_steamdeck
This project aim to create a minimalist custom keyboard using standard keycaps. The goal is to have no keys restriction compare to a 120% keyboard.
NeuroTinker/NeuroBytes_Photoreceptor
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
It measures 51.2 × 28.4 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the RCLAMP0503F.TCT and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NeuroTinker/NeuroBytes_Motor_Neuron repository on GitHub, at the commit this page was made from: the board is HARDWARE/NeuroBytes_Motor_Neuron.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NeuroTinker before reusing the design.