NeuroTinker/NeuroBytes_PhotoreceptorAll NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…
NeuroBytes Photoreceptor is an open-source printed circuit board by NeuroTinker, from the NeuroTinker/NeuroBytes_Photoreceptor repository on GitHub. It is a 2-layer board of 46.8 × 19.8 mm with 25 parts on 36 nets, routed with 279 tracks and 25 vias.
It is built around the APDS-9007-020 and RCLAMP0503F.TCT. Its parts include 7 capacitors, 4 resistors, 4 ICs, 3 connectors and 2 diodes. It belongs with the STM32 boards of this library.
The NeuroBytes Rod Photoreceptor is an open-source hardware neuron simulator designed and sold by NeuroTinker, LLC.
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons Attribution-ShareAlike 4.0 license, available here: http://creativecommons.org/licenses/by-sa/4.0/. The NeuroBytes Rod Photoreceptor is Certified Open Source Hardware as defined by OSHWA, certification number US000108.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0u1 | KiCad_Footprints:ZF_SMD_NonPol_0402_cap | C1, C2, C6 |
| 3 | 1u | Capacitors_SMD:C_0603_HandSoldering | C3, C4, C5 |
| 2 | 10 | KiCad_Footprints:ZF_SMD_NonPol_0402 | R2, R3 |
| 2 | JST_GH_4-POS | KiCad_Footprints:ZF_CONN_JST_GH | P1, P2 |
| 2 | LED | KiCad_Footprints:ZF_SMD_NonPol_0402 | D1, D2 |
| 2 | SW_PB_4term | KiCad_Footprints:ZF_SW_PTS810 | SW1, SW2 |
| 1 | 10k | KiCad_Footprints:ZF_SMD_NonPol_0402 | R1 |
| 1 | 10u | Capacitors_SMD:C_1206 | C7 |
| 1 | 3v3 LDO | KiCad_Footprints:ZF_SOT23-5L | U3 |
| 1 | APDS9007 | KiCad_Footprints:ZF_SENSOR_APDS-9007 | U1 |
| 1 | JMP | KiCad_Footprints:ZF_SMD_NonPol_0402 | R4 |
| 1 | JST_GH_5-pos | KiCad_Footprints:ZF_CONN_JST_GH_5POS | P3 |
| 1 | LOGO | KiCad_Footprints:ZF_LOGO_Photoreceptor | G*** |
| 1 | RClamp0503F | KiCad_Footprints:ZF_SMD_SOT-353 | U4 |
| 1 | STM32L011Gx | KiCad_Footprints:ZF_IC_UFQFPN28-050 | U2 |
The 23 most common of 25 parts.
NeuroTinker/NeuroBytes_Tonic_Neuron
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…
NeuroTinker/NeuroBytes_Force_Sensor
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…
vincentBenet/keyboard_steamdeck
This project aim to create a minimalist custom keyboard using standard keycaps. The goal is to have no keys restriction compare to a 120% keyboard.
NeuroTinker/NeuroBytes_Motor_Neuron
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…
NeuroTinker/NeuroBytes_NID
The Network Interface Device, or NID, is used to connect an Android tablet or phone to a NeuroBytes network, using UART and SWD depending on desired function.
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
It measures 46.8 × 19.8 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the APDS-9007-020 and RCLAMP0503F.TCT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NeuroTinker/NeuroBytes_Photoreceptor repository on GitHub, at the commit this page was made from: the board is HARDWARE/NeuroBytes_Photoreceptor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NeuroTinker before reusing the design.