
WirelessJLink V3S
hkustenterprize/RM2025-Wireless-JLink
Wireless JLink-OB based on Allwinner V3S

ST Link V2.1 is an open-source printed circuit board by NekoPurrTech, from the NekoPurrTech/ST-Link-V2.1 repository on GitHub. It is a 2-layer board of 13.9 × 35.8 mm with 42 parts on 53 nets, routed with 337 tracks and 56 vias.
It is built around the STM32F103CBT6, LP2992AIM5X-3.3 and 1N5819WS, with the S8050 among its other parts. Its parts include 19 resistors, 9 capacitors, 4 connectors, 3 diodes and 2 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C6 |
| 4 | 100R | Resistor_SMD:R_0603_1608Metric | R2, R12, R14, R17 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R7, R11 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C7, C8 |
| 3 | 4K7 | Resistor_SMD:R_0603_1608Metric | R8, R9, R16 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R18, R19 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | Conn_01x05_Pin | SamacSys_Parts:STLINK_PIN | J2, J3 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 1K5 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 2K7 | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 36K | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | BOOT0 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | CSTCE8M0G55-R0 | SamacSys_Parts:CSTCE12M0G55R0 | Y1 |
| 1 | Conn_01x04_Pin | SamacSys_Parts:SWD_Port | J4 |
| 1 | LOAD | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LOGO | SamacSys_Parts:nya | G*** |
| 1 | LP2992AIM5X-3.3 | SamacSys_Parts:SOT95P280X145-5N | IC1 |
| 1 | POWER | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | S8050 | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | STM32F103CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
The 41 most common of 42 parts.

hkustenterprize/RM2025-Wireless-JLink
Wireless JLink-OB based on Allwinner V3S


Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.




Tomoshibi-technology/RCJ-Japan2024-Circuit
RoboCup JapanOpen 2024とEindohoven 2024に向けての回路開発

It measures 13.9 × 35.8 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the STM32F103CBT6, LP2992AIM5X-3.3, 1N5819WS and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NekoPurrTech/ST-Link-V2.1 repository on GitHub, at the commit this page was made from: the board is Hardware/ST-Link-V2.1.kicad_pcb and its schematic Hardware/ST-Link-V2.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NekoPurrTech before reusing the design.