4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers325 × 100 mm
Version0.65
NeerajR18/version0.65wireless keyboard (65% layout)
- Size
- 325 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 138
- Nets
- 91
- Pads
- 764
- Tracks, vias
- 850, 17
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Jun 2026
- Updated
- 29 Jun 2026
Overview
Version0.65 is an open-source printed circuit board by NeerajR18, from the NeerajR18/version0.65 repository on GitHub. It is a 2-layer board of 325 × 100 mm with 138 parts on 91 nets, routed with 850 tracks and 17 vias.
It is built around the 1N4148W. Its parts include 64 diodes, 6 switches, 2 capacitors and 1 IC. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
Main components
1README
README.mdversion0.65
version0.65 is an almost 65% keyboard. It is a bluetooth keyboard, using the SuperMini nRF52840 board, which is pin compatible with the nice!nano v2. It has a built in battery along with a On/Off switch.
The keyboard is hotswap, with gateron hotswap sockets and Gateron Blue switches.
The PCB was designed in KiCad and the case was designed in Autodesk Fusion. The footprints for the switches have been taken from the marbastlib library - https://github.com/ebastler/marbastlib
This Keyboard was made for Hack Club KEEB.
Note: This is still a WIP. Please copy at your own risk.
Repository Guide
version1/
|── PCB/
| |── version0.65.kicad_pro
| |── version0.65.kicad_pcb
| |── version0.65.kicad_sch
| └── fp-lib-table
|
|── CAD/
| |── Base/
| | |── version0.65-base-left.step
| | |── version0.65-base-middle.step
| | └── version0.65-base-right.step
| |
| |──── Top/
| | |── version0.65-plate-left.step
| | └── version0.65-plate-right.step
| |
| |── version0.65-assembly.step
| └── version0.65.f3z
|
|── Production/
| |── gerbers.zip/
| |
| |── STL Files/Schematic
Overall Schematic
PCB
PCB Front without GND Plane
PCB Front with GND Plane
PCB Back without GND Plane
PCB Back with GND Plane
CAD
The case has been split to accomodate 3D printing. The plates and base have small pegs and holes for assembly.
Full Assembly
Top View
Side View
Top Plate
Top View
Side View
Base
Top View
Side View
Firmware
version0.65 uses ZMK firmare. While the firmware has not been tested IRL, it can be found in a separate repository.
Firmware repository- https://github.com/NeerajR18/zmk-config-version0.65
Bill of Materials
Parts
138| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D16, D17, D18, D19, D20, D21, D22, D23, D24 +48 |
| 56 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_KS-2P02B01-01_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX24, MX25 +40 |
| 5 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_KS-2P02B01-01_1.25u | MX57, MX59, MX61, MX62, MX63 |
| 2 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_KS-2P02B01-01_1.5u | MX16, MX29 |
| 2 | Shift | PCM_marbastlib-mx:STAB_MX_2.25u | S4, S5 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Backspace | PCM_marbastlib-mx:STAB_MX_2u | S2 |
| 1 | Enter | PCM_marbastlib-mx:STAB_MX_2.25u | S3 |
| 1 | GND | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BAT1 |
| 1 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_KS-2P02B01-01_1.75u | MX31 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | Space | PCM_marbastlib-mx:STAB_MX_P_6.25u | S1 |
| 1 | SuperMini nRF52840 | PCM_marbastlib-xp-promicroish:SuperMini_nRF52840_AH_USBup | U1 |
Similar boards
- 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm
- 4 layers95.6 × 73.6 mm
- 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm
Questions
How big is the Version0.65 PCB?
It measures 325 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Version0.65 use?
138 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Version0.65 KiCad files?
From the NeerajR18/version0.65 repository on GitHub, at the commit this page was made from: the board is PCB/version0.65.kicad_pcb and its schematic PCB/version0.65.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Version0.65 design in my own project?
Its repository states no licence, so its author keeps all rights: ask NeerajR18 before reusing the design.