2 layers65 × 31 mm
2 layers59.5 × 69.5 mm
Zenith
NateOrlowski06/Zenith2A high powered rocketry dual deploy recovery device and data logger.
- Size
- 59.5 × 69.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 38
- Pads
- 120
- Tracks, vias
- 135, 12
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 May 2025
- Updated
- 30 May 2025
Overview
Zenith is an open-source printed circuit board by NateOrlowski06, from the NateOrlowski06/Zenith repository on GitHub. It is a 2-layer board of 59.5 × 69.5 mm with 16 parts on 38 nets, routed with 135 tracks and 12 vias.
It is built around the BMP180. It belongs with the RP2040 boards of this library.
Main components
1Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | IGNITOR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 2 | MOSFET | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 1 | BMP180 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | Batt input | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | Capacitor | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | R1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | R2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | SD CARD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | Voltage Regulator | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
Similar boards
- 2 layers98 × 83.8 mm
Projeto placa
phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.
39 parts19MIT - 2 layers86.5 × 59.7 mm
- 2 layers93 × 42 mm
ADEM
timelab/ADEM
Mobile device for distributed measurements of particulate matter (fine dust)
29 parts13LGPL-3.0 - 2 layers55.5 × 21.9 mm
- 2 layers61 × 61 mm
ESP32 FC
MAATHES-THILAK-K/ESP32-S3_FLIGHT_CONTROLLER
A custom-designed flight controller based on the ESP32-S3 module, built for compatibility with the esp-fc firmware and Betaflight-like configuration.
69 parts7Apache-2.0 - 2 layers
- 2 layers58.4 × 74.7 mm
Placa manutencao preventiva
phfbertoleti/placa_monitoramento_lorawan
Placa - Monitoramento LoRaWAN
23 parts4MIT
Questions
How big is the Zenith PCB?
It measures 59.5 × 69.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zenith use?
16 parts, built around the BMP180. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zenith KiCad files?
From the NateOrlowski06/Zenith repository on GitHub, at the commit this page was made from: the board is Models/Zenith.kicad_pcb and its schematic Models/Zenith.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zenith design in my own project?
Its repository states no licence, so its author keeps all rights: ask NateOrlowski06 before reusing the design.