
BackupProjects chepjune personal 3 20260226
Mitchkal/kicad
A repo of my kicd pcb projects

A repo of my kicd pcb projects
Usb5v charger is an open-source printed circuit board by Mitchkal, from the Mitchkal/kicad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100.5 × 38 mm with 23 parts on 20 nets, routed with 114 tracks and 4 vias.
It is built around the 1N4148WT and MJE13003H. Its parts include 6 resistors, 6 diodes, 5 capacitors, 2 transistors and 2 connectors. It belongs with the power boards of this library.
A repo of my kicad pcb projects
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4148WT | Diode_SMD:D_SOD-523 | D1, D5, D6, D7 |
| 2 | 1K | Resistor_SMD:R_0201_0603Metric | R4, R6 |
| 1 | 100 | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 103/1KV | Capacitor_SMD:C_0201_0603Metric | C4 |
| 1 | 13 | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 1M5 | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | 220uF | Capacitor_SMD:C_1808_4520Metric | C5 |
| 1 | 22uF | Capacitor_SMD:C_01005_0402Metric | C2 |
| 1 | 2SC1945 | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | 472 | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 47K | Resistor_SMD:R_0201_0603Metric | R5 |
| 1 | C_Polarized_US | Capacitor_SMD:C_01005_0402Metric | C1 |
| 1 | Conn_01x02_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | D_Zener | Diode_SMD:Littelfuse_PolyZen-LS | D2 |
| 1 | Fuse_Small | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | LED | LED_SMD:LED_0201_0603Metric | D8 |
| 1 | LL1587 | Transformer_THT:Transformer_Microphone_Lundahl_LL1587 | T1 |
| 1 | MJE13003 | Package_TO_SOT_THT:TO-126-3_Vertical | Q1 |
| 1 | USB_B | Connector_USB:USB_B_TE_5787834_Vertical | J2 |

Mitchkal/kicad
A repo of my kicd pcb projects


ahnaf-tahmid-chowdhury/SmartGeiger
Development of background radiation monitoring with IoT based device


shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.


todbot/macropadsynthplug
Turn StemmaQT port by into Audio Out + MIDI In

acha666/RP2040_ToolheadPCB_SB
A Toolhead PCB for VORON StealthBurner based on RP2040

It measures 100.5 × 38 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the 1N4148WT and MJE13003H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Mitchkal/kicad repository on GitHub, at the commit this page was made from: the board is 5vusb_charger/usb5v charger.kicad_pcb and its schematic 5vusb_charger/usb5v charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).