
Geiger
ahnaf-tahmid-chowdhury/SmartGeiger
Development of background radiation monitoring with IoT based device

Fundamental PCB designs
Circuit adaptor is an open-source printed circuit board by padamwarshivani, from the padamwarshivani/PCB_design repository on GitHub. It is a 2-layer board with 20 parts on 12 nets, routed with 83 tracks and 0 vias.
It is built around the MJE13003H. Its parts include 6 diodes, 4 capacitors, 4 resistors, 4 connectors and 1 transistor.
Fundamental PCB designs
Basic electronics widely used as a daily essential, practicing PCB circuit design and analysis. Beautifying various factors of electronics.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Screw_Terminal_01x01 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360271_1x01_Horizontal_ScrewM3.0_Boxed | J1, J2, J3, J4 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D3 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0614_L14.3mm_D5.7mm_P25.40mm_Horizontal | R1 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D6 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_Horizontal | R4 |
| 1 | 1nF | Capacitor_THT:C_Disc_D10.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 22uf | Capacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mm | C4 |
| 1 | 2u2 | Capacitor_THT:C_Radial_D10.0mm_H16.0mm_P5.00mm | C3 |
| 1 | 3mm | LED_THT:LED_D2.0mm_W4.0mm_H2.8mm_FlatTop | D2 |
| 1 | 470uF | Capacitor_THT:C_Radial_D10.0mm_H16.0mm_P5.00mm | C5 |
| 1 | 5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 6V2 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D5 |
| 1 | 8k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | MJE13003 | Package_TO_SOT_THT:TO-126-3_Vertical | Q1 |
| 1 | Transformer_1P_2S | Transformer_THT:Transformer_Triad_VPP16-310 | T1 |

ahnaf-tahmid-chowdhury/SmartGeiger
Development of background radiation monitoring with IoT based device




atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts, built around the MJE13003H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the padamwarshivani/PCB_design repository on GitHub, at the commit this page was made from: the board is Circuit_adaptor.kicad_pcb and its schematic Circuit_adaptor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask padamwarshivani before reusing the design.