Skip to the content
2 layers48.3 × 59.7 mmYii, the printed circuit board in 3D

tomodachi life-style mii dolls with esp32's inside

Size
48.3 × 59.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
38
Pads
46
Tracks, vias
36, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
1 Apr 2026
Updated
13 Jun 2026

Overview

Yii is an open-source printed circuit board by Milk-Cool, from the Milk-Cool/yii repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 48.3 × 59.7 mm with 5 parts on 38 nets, routed with 36 tracks and 0 vias.

It is built around the TP4056. Its parts include 4 connectors and 1 switch. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

yii

tomodachi life-style mii dolls with esp32's inside that can speak to each other via BLE and TTS!

dolls

how do i use it?

first, you need to build the dolls!! you can find the pcb files and the schematic under the kicad/ directory, or you can take a look at them here:

schematic pcb

note that even though i'd recommend a pcb, it's not really necessary to use a pcb since all the components are held together by plush anyway. you can also see a list of components in bom.csv.
as for the dolls themselves, go creative! i found these on aliexpress, and dyed them with fabric paint. i also glued on velcro with fabric glue for attaching the facial features (face/ for files to be printed), and used a zip locker so that i can open and close them to take components out when needed.

after you're done with the physical part, install the firmware on your esp32's (can be found in firmware/) you can use the online tool to set up the dolls' name and wifi password via usb, then connect via wifi, set voice parameters and reboot to doll mode! (note: if anything goes wrong and the dolls end up bricked, you can erase the flash with esptool, google it)

as for the remote, you're gonna need a plain esp32 board. just flash it with the same firmware and set it up like you'd set up a doll, but reboot it to control mode instead. then, using the online tool, you can control your dolls (poke, feed, and play with them).

what does it do?

there's a lot of stuff you can do with the dolls, but the most important one is watching them!! if you get two or more of them, you can watch them talk to each other. they'll develop a friendship and maybe even a romantic relationship eventually! (note: there's no gender/romantic preferences system here, everyone's attracted to everyone)

other than that, you can feed them with the remote, poke them, or play games with them. you can also track their progress and their XP as they talk to others more and more.

why does this exist?

i was a really big fan of tomodachi life ever since i learned about the first game, and i thought i might want to bring the concept of miis to life!! and so i did :D

it's nowhere near as good, obviously, but i'm happy with the result

credits

1p2t kicad library: https://github.com/BrianLeishman/jrgbwww24/blob/master/1P2T%20SPDT.kicad_mod tp4056 kicad library: https://github.com/ccadic/TP4056-18650

Parts

5
QtyValueFootprintReferences
1Conn_01x07_SocketConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ4
1ESP32 p1-15Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_VerticalJ2
1ESP32 p16-30Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_VerticalJ3
1SW_SPDT_XKB_DMx-xxxx-11P2T:1p2tSW1
1TP4056TP4056:TP4056-18650J1

Similar boards

  • 2 layers80 × 129.1 mmSmart Plant, the printed circuit board in 3D

    Smart Plant

    JGAguado/Smart_Plant

    The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

    75 parts303
  • 2 layers129.5 × 50.8 mmLilka, the printed circuit board in 3D

    Lilka

    lilka-dev/lilka

    Схема та документація ігрової консолі Lilka

    39 parts234GPL-2.0
  • 2 layers110 × 115 mmEsp32 keyboard v0.1, the printed circuit board in 3D

    Esp32 keyboard v0.1

    hhuysqt/esp32s3-keyboard

    USB/BLE keyboard driver based on ESP32S3-WROOM-1

    230 parts168GPL-3.0
  • 2 layers192.4 × 50 mmOmote, the printed circuit board in 3D

    Omote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    187 parts157GPL-3.0
  • 2 layers316 × 119 mmTeensy Grovebox, the printed circuit board in 3D

    Teensy Grovebox

    jerry20091103/Teensy_Grovebox

    A portable synth and music multi-tool made with Teensy 4.1

    142 parts150MIT
  • 4 layers43 × 49 mmEsppdp, the printed circuit board in 3D

    Esppdp

    Spritetm/esppdp

    ESP32-based PDP11 simulator, based onSimH

    55 parts141
  • 2 layersCharger stepup, the printed circuit board in 3D

    Charger stepup

    Aplyard/Oled-Clicker

    Clicker Counter for Arduino Nano

    19 parts117BSD-3-Clause
  • 6 layers64.8 × 69.9 mmEzDV, the printed circuit board in 3D

    EzDV

    tmiw/ezDV

    A FreeDV device based on the ESP32.

    130 parts114

Questions

How big is the Yii PCB?

It measures 48.3 × 59.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Yii use?

5 parts, built around the TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Yii KiCad files?

From the Milk-Cool/yii repository on GitHub, at the commit this page was made from: the board is kicad/yii.kicad_pcb and its schematic kicad/yii.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Yii design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).